I modified the Super MS-DOS 7.10 boot disk - China DOS Union Forum

The main changes are as follows:
Changed the IMG size to 2.88M
Changed it to boot by ISO
Use JO.SYS to choose whether to boot from CD or hard disk
Converted readme.txt into readme.exe (so Chinese can be displayed directly without starting the xzl system)
Fixed the RAM drive letter as Z:
Added XCOPY.EXE -- the powerful XCOPY replacement tool (XXCOPY16)
Added CMOS.COM -- clears the BIOS password
Added MOVE.EXE -- the move file command
Added HD.EXE -- the HD-COPY floppy disk tool
Added menu support for UltraBoot Disk
At startup, when choosing the LFN code page, the second item (Chinese) is selected automatically
At the end of startup, if ESC is not pressed within 2 seconds, the menu is displayed automatically

Modified version download:
http://www.iso9660.net/UpLoadFile/2004-1/2004131195753913.zip

So it's pkmaster, welcome! Unfortunately, recently Dandiao often can't be accessed, and there are often very few posts.

Actually, in the versions after September 30, the “Super MS-DOS 7.10 boot disk” already had functions for booting from floppy, from hard disk, from CD, etc. It was done with GNU GRUB.

I went a step further and compressed all three tools from Paragon Partition Manager 5.5 into it!

The DOS version of Partition Explorer is really powerful!
With an Explorer-style interface, it can perform cut, copy, paste, delete, and other operations in FAT32/NFTS partitions, and it supports long filenames! But it's a bit of a pity that it does not support operations on Chinese filenames!

What is the file BCDL.BIN used for?

BCDL.BIN is used for booting from CD.

Take a look at the version I modified further!

http://powerkit.vicp.net/b.iso

Changes:
☆Added the three tools from Paragon Partition Manager 5.5 (using ACE's DOS self-extractor)
☆Replaced the xzl Chinese character support system with the CCDOS 97 Chinese character support system; it's fast, stable, and supports the Pinyin input method and a line calculator
☆Packed the unused commands in autoexec.bat and config.sys into EBD.CAB
☆Replaced XXCOPY16 with Win98's XCOPY (reason: it takes up too much space and together with CCDOS it won't fit into 2.88)
☆Increased the RAM drive capacity to 6144
☆Added two menu options in config.sys, inheriting the original M1 and M3, but during startup there is no prompt from wbat to make a selection, to avoid waiting a few seconds and pressing Enter twice; these two configurations feel relatively stable! By default it starts smartdrv and lfndos 936, and does not start NTFSDOS (because there is a much more powerful Partition Explorer than it).
☆Enabled write caching in both pccache and smartdrv
☆Deleted some unnecessary tools: clock, cdplay, qv1

There are many more adjustments...

Deleted some unnecessary tools: clock, cdplay, qv1

So multimedia and similar functions are all gone?

My main purpose is to make a system maintenance CD, so multimedia functions are not needed!

If you really want them, you can use mpxplay to play MP3s (and since this is a CD, it's impossible to play Audio CDs anymore, and besides, Audio CDs are rarely used now), and for image browsing, SEA 1.3 is enough!
Since this is a CD, some functions that take up too much space or are not major are not put inside the IMG!

If you really want image browsing and MP3 playback, you'd be better off using QV 2.x and the like. That SEA is big and hard to use, and MPXPLAY is also a bit larger, so it's not as good as QV 2.x.

Floor1　pk4321	Posted 2004-01-31 00:00
初级用户　Posts 8　Credits 116
The main changes are as follows: Changed the IMG size to 2.88M Changed it to boot by ISO Use JO.SYS to choose whether to boot from CD or hard disk Converted readme.txt into readme.exe (so Chinese can be displayed directly without starting the xzl system) Fixed the RAM drive letter as Z: Added XCOPY.EXE -- the powerful XCOPY replacement tool (XXCOPY16) Added CMOS.COM -- clears the BIOS password Added MOVE.EXE -- the move file command Added HD.EXE -- the HD-COPY floppy disk tool Added menu support for UltraBoot Disk At startup, when choosing the LFN code page, the second item (Chinese) is selected automatically At the end of startup, if ESC is not pressed within 2 seconds, the menu is displayed automatically Modified version download: http://www.iso9660.net/UpLoadFile/2004-1/2004131195753913.zip

Floor2　Wengier	Posted 2004-01-31 00:00
系统支持　Posts 10,521　Credits 27,736
So it's pkmaster, welcome! Unfortunately, recently Dandiao often can't be accessed, and there are often very few posts. Actually, in the versions after September 30, the “Super MS-DOS 7.10 boot disk” already had functions for booting from floppy, from hard disk, from CD, etc. It was done with GNU GRUB.

Floor3　pk4321	Posted 2004-02-01 00:00
初级用户　Posts 8　Credits 116
I went a step further and compressed all three tools from Paragon Partition Manager 5.5 into it! The DOS version of Partition Explorer is really powerful! With an Explorer-style interface, it can perform cut, copy, paste, delete, and other operations in FAT32/NFTS partitions, and it supports long filenames! But it's a bit of a pity that it does not support operations on Chinese filenames!

Floor4　pk4321	Posted 2004-02-01 00:00
初级用户　Posts 8　Credits 116
What is the file BCDL.BIN used for?

Floor5　Wengier	Posted 2004-02-01 00:00
系统支持　Posts 10,521　Credits 27,736
BCDL.BIN is used for booting from CD.

Floor6　pk4321	Posted 2004-02-01 00:00
初级用户　Posts 8　Credits 116
Take a look at the version I modified further! http://powerkit.vicp.net/b.iso Changes: ☆Added the three tools from Paragon Partition Manager 5.5 (using ACE's DOS self-extractor) ☆Replaced the xzl Chinese character support system with the CCDOS 97 Chinese character support system; it's fast, stable, and supports the Pinyin input method and a line calculator ☆Packed the unused commands in autoexec.bat and config.sys into EBD.CAB ☆Replaced XXCOPY16 with Win98's XCOPY (reason: it takes up too much space and together with CCDOS it won't fit into 2.88) ☆Increased the RAM drive capacity to 6144 ☆Added two menu options in config.sys, inheriting the original M1 and M3, but during startup there is no prompt from wbat to make a selection, to avoid waiting a few seconds and pressing Enter twice; these two configurations feel relatively stable! By default it starts smartdrv and lfndos 936, and does not start NTFSDOS (because there is a much more powerful Partition Explorer than it). ☆Enabled write caching in both pccache and smartdrv ☆Deleted some unnecessary tools: clock, cdplay, qv1 There are many more adjustments...

Floor7　pk4321	Posted 2004-02-02 00:00
初级用户　Posts 8　Credits 116

Floor8　Wengier	Posted 2004-02-02 00:00
系统支持　Posts 10,521　Credits 27,736
Deleted some unnecessary tools: clock, cdplay, qv1 So multimedia and similar functions are all gone?

Floor9　联众明星	Posted 2004-02-02 00:00
初级用户　Posts 1　Credits 103
pk4321

Floor10　pk4321	Posted 2004-02-02 00:00
初级用户　Posts 8　Credits 116
My main purpose is to make a system maintenance CD, so multimedia functions are not needed! If you really want them, you can use mpxplay to play MP3s (and since this is a CD, it's impossible to play Audio CDs anymore, and besides, Audio CDs are rarely used now), and for image browsing, SEA 1.3 is enough! Since this is a CD, some functions that take up too much space or are not major are not put inside the IMG!

Floor11　Wengier	Posted 2004-02-03 00:00
系统支持　Posts 10,521　Credits 27,736
If you really want image browsing and MP3 playback, you'd be better off using QV 2.x and the like. That SEA is big and hard to use, and MPXPLAY is also a bit larger, so it's not as good as QV 2.x.