Experts, please take a look at how I should set my BIOS - China DOS Union Forum

My motherboard is an MSI 845E. Every time I boot up, it stays in the detection stage for a very long time.
The content is roughly as follows:
Inetl UNDI ,PXE-2.0(build 082)
Copyrignt (C)1997-2000 Intel corporation
For Realtek RTL 8139 (A/B/C)/RTL8130 PCI FAST Ethernet Controller V2.11(001205)
CLIENT MAC ADDR 00 0A EB 25 4979 GUID FFFFFFFF FFFF FFFF FFFF FFFFFFFFFFFF
DHCP....
The four dots after DHCP appear one slower than the next, and there is a spinning cursor after them.
After an N-minute long wait, a line of text appears that I can't fully see.
There is something like PXE －E51, and after that something about exiting PXE－ ROM.
Only then does it go into CD boot and system boot.
Could some expert help me? Is there any way to stop it from torturing me? I don't want to wait. I've gone through the motherboard BIOS manual from beginning to end,
and tried the settings one by one, but I still couldn't get rid of it. What the hell kind of detection is this!!!!!!!!!!

Have you tried swapping in a different network card?

You probably didn't install the chipset drivers!!!

The following is quoted from 浪里淘沙 on 2004-1-27 12:05:15:
My motherboard is an MSI 845E. Every time I boot up, it stays in the detection stage for a very long time.
The content is roughly as follows:
Inetl UNDI ,PXE-2.0(build 082)
Copyrignt (C)1997-2000 Intel corporation
For Realtek RTL 8139 (A/B/C)/RTL8130 PCI FAST Ethernet Controller V2.11(001205)
CLIENT MAC ADDR 00 0A EB 25 4979 GUID FFFFFFFF FFFF FFFF FFFF FFFFFFFFFFFF
DHCP....  
The four dots after DHCP appear one slower than the next, and there is a spinning cursor after them.
After an N-minute long wait, a line of text appears that I can't fully see.
There is something like PXE  －E51, and after that something about exiting  PXE－ ROM 
Only then does it go into CD boot and system boot.
Could some expert help me? Is there any way to stop it from torturing me? I don't want to wait. I've gone through the motherboard BIOS manual from beginning to end.
I tried the settings one by one but still couldn't get rid of it. What the hell kind of detection is this!!!!!!!!!!

Mine is a Gigabyte 845E board, and it has this too. I want to ask whether you have solved this problem by now.
I heard from a classmate that his situation was similar. Later he went to the PC shop and upgraded the BIOS, and then it was fine.

It may be a network card problem

Floor1　浪里淘沙	Posted 2004-01-27 00:00
初级用户　Posts 5　Credits 122
My motherboard is an MSI 845E. Every time I boot up, it stays in the detection stage for a very long time. The content is roughly as follows: Inetl UNDI ,PXE-2.0(build 082) Copyrignt (C)1997-2000 Intel corporation For Realtek RTL 8139 (A/B/C)/RTL8130 PCI FAST Ethernet Controller V2.11(001205) CLIENT MAC ADDR 00 0A EB 25 4979 GUID FFFFFFFF FFFF FFFF FFFF FFFFFFFFFFFF DHCP.... The four dots after DHCP appear one slower than the next, and there is a spinning cursor after them. After an N-minute long wait, a line of text appears that I can't fully see. There is something like PXE －E51, and after that something about exiting PXE－ ROM. Only then does it go into CD boot and system boot. Could some expert help me? Is there any way to stop it from torturing me? I don't want to wait. I've gone through the motherboard BIOS manual from beginning to end, and tried the settings one by one, but I still couldn't get rid of it. What the hell kind of detection is this!!!!!!!!!!

Floor2　Kinglion	Posted 2004-02-03 00:00
铂金会员　Posts 1,924　Credits 5,798　From 金獅電腦軟體工作室
Have you tried swapping in a different network card?

Floor3　飘尘子	Posted 2004-02-03 00:00
初级用户　Posts 2　Credits 104
You probably didn't install the chipset drivers!!!

Floor4　fingerling	Posted 2004-02-03 00:00
中级用户　Posts 34　Credits 239
*The following is quoted from 浪里淘沙 on 2004-1-27 12:05:15:* My motherboard is an MSI 845E. Every time I boot up, it stays in the detection stage for a very long time. The content is roughly as follows: Inetl UNDI ,PXE-2.0(build 082) Copyrignt (C)1997-2000 Intel corporation For Realtek RTL 8139 (A/B/C)/RTL8130 PCI FAST Ethernet Controller V2.11(001205) CLIENT MAC ADDR 00 0A EB 25 4979 GUID FFFFFFFF FFFF FFFF FFFF FFFFFFFFFFFF DHCP....   The four dots after DHCP appear one slower than the next, and there is a spinning cursor after them. After an N-minute long wait, a line of text appears that I can't fully see. There is something like PXE  －E51, and after that something about exiting  PXE－ ROM  Only then does it go into CD boot and system boot. Could some expert help me? Is there any way to stop it from torturing me? I don't want to wait. I've gone through the motherboard BIOS manual from beginning to end. I tried the settings one by one but still couldn't get rid of it. What the hell kind of detection is this!!!!!!!!!! Mine is a Gigabyte 845E board, and it has this too. I want to ask whether you have solved this problem by now. I heard from a classmate that his situation was similar. Later he went to the PC shop and upgraded the BIOS, and then it was fine.

Floor5　寒月风	Posted 2004-02-07 00:00
初级用户　Posts 9　Credits 130
It may be a network card problem