Because my mouse is a USB interface, when I use the DOS version of GHOST (boot disk plus GHOST) for backup and restoration, I want to use the mouse under DOS. So I downloaded the USB mouse driver files under DOS here: OHCI.EXE and UHCI.EXE. I copied these two files to drive A and added in the CONFIG.SYS file (originally this file was empty):
DEVICE=OHCI.EXE
DEVICE=UHCI.EXE
At this time, when I boot the computer with this GHOST boot disk, I can already enter the GHOST operation interface and can move the mouse, but just after moving the mouse a few times, the system crashes and the following prompt appears:
page Fault cr2=10000440 in RMCB at eip=93;flags=3002
eax=00050000 ebx=00000001 ecx=0000d10f edx=0043005a esi=00010006 edi=0006
General protection Fault in RMCB at eip=14eb; flags=3002
eax=0000000d esp=002ae6d6 cs=2b ds=3b es=8f fs=33 gs=bf ss=8f error=cf60
an internal stack overflow has caused this session to be halted.change the STACKS setting in your CONFIG.SYS file .and then try again.
And at this time the floppy drive has been reading the disk, and I can't turn off the computer at all, the power button is invalid, and finally I have to pull out the plug to force the computer to shut down. But when I plug in the power plug again, the computer automatically starts without pressing the power button on the main unit. It's really strange, I've never encountered this problem before.
I don't know what to do now? Does it mean that there is no way to use the USB mouse under the DOS operating system? Please ask the moderator or that friend to give me some advice, thank you!!!
DEVICE=OHCI.EXE
DEVICE=UHCI.EXE
At this time, when I boot the computer with this GHOST boot disk, I can already enter the GHOST operation interface and can move the mouse, but just after moving the mouse a few times, the system crashes and the following prompt appears:
page Fault cr2=10000440 in RMCB at eip=93;flags=3002
eax=00050000 ebx=00000001 ecx=0000d10f edx=0043005a esi=00010006 edi=0006
General protection Fault in RMCB at eip=14eb; flags=3002
eax=0000000d esp=002ae6d6 cs=2b ds=3b es=8f fs=33 gs=bf ss=8f error=cf60
an internal stack overflow has caused this session to be halted.change the STACKS setting in your CONFIG.SYS file .and then try again.
And at this time the floppy drive has been reading the disk, and I can't turn off the computer at all, the power button is invalid, and finally I have to pull out the plug to force the computer to shut down. But when I plug in the power plug again, the computer automatically starts without pressing the power button on the main unit. It's really strange, I've never encountered this problem before.
I don't know what to do now? Does it mean that there is no way to use the USB mouse under the DOS operating system? Please ask the moderator or that friend to give me some advice, thank you!!!
