Newbies Keep Out - China DOS Union Forum - China DOS Union

I'm dizzy _ _!!

This diagnostic command displays all current TCP/IP network configuration values. This command has special use on systems running DHCP, allowing the user to determine the TCP/IP configuration values configured by DHCP.

ipconfig | /release ]

Parameters

/all

Produces a full display. Without this switch, ipconfig displays only the IP address, subnet mask, and default gateway value for each network card.

/renew

Renews DHCP configuration parameters. This option is available only on systems running the DHCP Client service. To specify an adapter name, type the adapter name shown by the ipconfig command used without parameters.

/release

Releases the current DHCP configuration. This option disables TCP/IP on the local system and is available only on DHCP clients. To specify an adapter name, type the adapter name shown by the ipconfig command used without parameters.

If there are no parameters, the ipconfig utility will provide the user with all current TCP/IP configuration values, including the IP address and subnet mask. This utility is especially useful on systems running DHCP, allowing the user to determine the values configured by DHCP.

Floor1　Chelsea	Posted 2003-11-02 00:00
初级用户　Posts 1　Credits 105
Hello everyone! What exactly does the Ipconfig command do?

Floor2　hunome	Posted 2003-11-02 00:00
银牌会员　Posts 721　Credits 2,265
I came in, so what can you do about it?

Floor3　young1234	Posted 2003-11-04 00:00
中级用户　Posts 62　Credits 333
Hehe, I'm a newbie too, but I know this is the command for displaying the IP

Floor4　imp	Posted 2003-11-06 00:00
银牌会员　Posts 309　Credits 1,001
I'm dizzy _ _!! This diagnostic command displays all current TCP/IP network configuration values. This command has special use on systems running DHCP, allowing the user to determine the TCP/IP configuration values configured by DHCP. ipconfig \| /release ] Parameters /all Produces a full display. Without this switch, ipconfig displays only the IP address, subnet mask, and default gateway value for each network card. /renew Renews DHCP configuration parameters. This option is available only on systems running the DHCP Client service. To specify an adapter name, type the adapter name shown by the ipconfig command used without parameters. /release Releases the current DHCP configuration. This option disables TCP/IP on the local system and is available only on DHCP clients. To specify an adapter name, type the adapter name shown by the ipconfig command used without parameters. If there are no parameters, the ipconfig utility will provide the user with all current TCP/IP configuration values, including the IP address and subnet mask. This utility is especially useful on systems running DHCP, allowing the user to determine the values configured by DHCP.

Floor5　disk	Posted 2003-11-07 00:00
初级用户　Posts 19　Credits 158
What the OP means is, don't come in if you're a bird like me.

Floor6　disk	Posted 2003-11-07 00:00
初级用户　Posts 19　Credits 158
*The following is quoted from hunome's post at 2003-11-2 21:01:14:* I came in, so what can you do about it? The OP's hidden meaning: Bastard, how dare you not listen to me. I'll cut you into ten thousand pieces. But... well, well, since I can't beat you, let's forget it, I'll let you off this time Ha

Floor7　雨晨	Posted 2004-08-29 00:00
初级用户　Posts 4　Credits 115
Sorry, I came in too

Floor8　jie2p	Posted 2006-04-09 17:01
初级用户　Posts 6　Credits 20　From 江苏

Floor9　wl00560	Posted 2006-04-10 22:07
银牌会员　Posts 709　Credits 1,384
Came in for a moment

Floor10　xuantian	Posted 2006-04-11 14:07
高级用户　Posts 282　Credits 587
Strange, even the help is in Chinese, and you still need to ask others?