Please clarify the specific content related to "求DOS里设备驱动的设置方法" to provide an accurate translation. As the translation of "求DOS里设备驱动的设置方法" is "Seeking the setup method of device drivers in DOS" - China DOS Union Forum

From a non-strict perspective, DOS is hardware-independent, meaning that the DOS you install on one machine can be removed from the hard drive and used on any other machine without issues, unlike Windows which is strictly hardware-dependent. Actually, the drivers for the most basic components in DOS, such as the keyboard, serial/parallel ports, floppy drives, and hard drives, are included in the BIOS and are considered standard, "universally applicable." Only non-basic devices like mice, sound cards, and CD-ROM drives require additional drivers to be loaded.

When encountering a crash during DOS startup, you can press the F8 key during startup to step through each command in CONFIG.SYS and AUTOEXEC.BAT one by one to see at which step the crash occurs, and then analyze and debug specifically.

[ Last edited by DOSforever on 2018-9-12 at 19:53 ]

Floor1　hongzhiqiang	Posted 2018-09-11 08:33
新手上路　Posts 2　Credits 6　From 广东省
A platform scale machine uses the DOS system and an early Chinese system (it seems to be Kingsoft Chinese system). The original mainboard is ASUS H61M-D. After replacing with another mainboard because the parallel port is broken, when booting DOS, it gets stuck halfway and doesn't move. It should be that the hardware of the mainboard is different, so it gets stuck. Please find the setting method of device drivers in DOS.

Floor2　DOSforever	Posted 2018-09-12 19:29
金牌会员　Posts 2,239　Credits 4,639
From a non-strict perspective, DOS is hardware-independent, meaning that the DOS you install on one machine can be removed from the hard drive and used on any other machine without issues, unlike Windows which is strictly hardware-dependent. Actually, the drivers for the most basic components in DOS, such as the keyboard, serial/parallel ports, floppy drives, and hard drives, are included in the BIOS and are considered standard, "universally applicable." Only non-basic devices like mice, sound cards, and CD-ROM drives require additional drivers to be loaded. When encountering a crash during DOS startup, you can press the F8 key during startup to step through each command in CONFIG.SYS and AUTOEXEC.BAT one by one to see at which step the crash occurs, and then analyze and debug specifically. [ Last edited by DOSforever on 2018-9-12 at 19:53 ]

Floor3　hongzhiqiang	Posted 2018-09-12 22:13
新手上路　Posts 2　Credits 6　From 广东省
Oh, then I'll try it when I'm free. The other department in the unit is a bit far away. I'll give a report after trying it.