How to load the Motto Hairu (USB) driver in a boot disk - China DOS Union Forum

3, In cases where sector 0 of the hard disk is damaged, it is rather troublesome, but not beyond saving—just mask the bad sector 0 and use sector 1 to replace 0. The ideal software for doing this is PCTOOLS. Specifically, PCTOOS is a tool in DE. In the main menu, choose Drive under Select. After entering, set the Drive type item to Physical by pressing the space bar, then press TAB to switch to the Drives item, select HARD DISK, then OK. After pressing Enter you will return to the main menu. Open the SELECT menu, and at this point PARTITION TABLE will appear. Select it to enter, and the hard disk partition table information will appear. This hard disk has two partitions. Find drive C. This partition starts from cylinder 0 of the hard disk, so just change the 0 in the BEGINNING CYLINDER of partition 1 to 1. Save and exit, restart the computer, press DEL to enter the COMS settings, do "IDE AUTO DETECT" so the BIOS redetects the hard disk parameters, save and exit, then repartition and format the hard disk. The hard disk can continue to be used. Note: after the sector modification is completed, the partition table information will only be written to sector 1 after the hard disk is formatted

Download here http://www.bear5.com/curio.htm

Floor1　zrm	Posted 2003-10-01 00:00
初级用户　Posts 9　Credits 136
I'd like to ask how to load the Motto Hairu (USB) driver in a boot disk. I'm using a USB laptop hard disk. Motto Hairu's help is in English, and I can't understand it.

Floor2　Wengier	Posted 2003-10-01 00:00
系统支持　Posts 10,521　Credits 27,736
Take a look at the DOS boot disk we made; it's in there.

Floor3　bdrman	Posted 2006-01-02 14:38
新手上路　Posts 2　Credits 4
Where can I download Motto Hairu? OP, do you have it? Could you send me one? Or tell me where it can be downloaded? Thanks in advance!

Floor4　dosz	Posted 2006-01-02 15:00
中级用户　Posts 188　Credits 396　From 上海
I have more than a dozen floppy disks with bad track 0. Webmaster, please give me a copy of PCTools 5.0.

Floor5　store88	Posted 2006-01-02 15:49
中级用户　Posts 125　Credits 416
3, In cases where sector 0 of the hard disk is damaged, it is rather troublesome, but not beyond saving—just mask the bad sector 0 and use sector 1 to replace 0. The ideal software for doing this is PCTOOLS. Specifically, PCTOOS is a tool in DE. In the main menu, choose Drive under Select. After entering, set the Drive type item to Physical by pressing the space bar, then press TAB to switch to the Drives item, select HARD DISK, then OK. After pressing Enter you will return to the main menu. Open the SELECT menu, and at this point PARTITION TABLE will appear. Select it to enter, and the hard disk partition table information will appear. This hard disk has two partitions. Find drive C. This partition starts from cylinder 0 of the hard disk, so just change the 0 in the BEGINNING CYLINDER of partition 1 to 1. Save and exit, restart the computer, press DEL to enter the COMS settings, do "IDE AUTO DETECT" so the BIOS redetects the hard disk parameters, save and exit, then repartition and format the hard disk. The hard disk can continue to be used. Note: after the sector modification is completed, the partition table information will only be written to sector 1 after the hard disk is formatted Download here http://www.bear5.com/curio.htm