Download: MS-DOS 7.10 Complete Installation Version (Including Graphic Installation Program) - China DOS Union Forum

Everyone knows that MS-DOS 7.10 is a very powerful, practical, well-compatible, and most widely used DOS operating system. For example, it supports various FAT12, FAT16, FAT32 partitions, large hard disks, large memory, long file names, etc. And on it, you can use the WIN command to start the famous GUI programs under DOS - Windows 3.x and Windows 9x.

This is its full installation version. Its installation program is in a wizard mode. Through this installation program, everyone can easily install MS-DOS 7.10 to the system (hard disk).

Characteristics of the installation program: operates in full-graphic mode, can choose the installation path (default is C:\DOS71), installation method (full installation, install only DOS commands, minimal installation), etc., and supports coexistence with Win9x, automatically identifies existing Windows NT/2K/XP or older versions of DOS (such as MS-DOS 6.x) in the system, and allows users to choose whether to automatically make a dual boot!

Newly supports plug-in functions (there are plug-in downloads in the following posts, such as PDOS95 plug-in, CCDOS97, Windows GUI plug-in, etc., and there are also combined plug-in downloads)!

Note: When the MS-DOS 7.10 installation version finds that the hard disk is not partitioned or formatted, the installation program will automatically partition, format, and activate the partition of the hard disk. Then continue the installation of MS-DOS 7.10.

You can directly use the floppy disk installation version, that is, first make the installation floppy disk, then boot the system with installation disk 1, and then the complete installation of MS-DOS 7.10 will be automatically carried out (or run SETUP inside directly after booting from the hard disk), and follow the prompts to complete the installation:

Now the MS-DOS 7.10 installation program (floppy disk version) has been uploaded to newdos.yginfo.net. The download addresses (note: the following addresses are permanent download addresses):

Installation disk 1: http://www.cn-dos.net/msdos71/dos71_1.zip (required)
Installation disk 2: http://www.cn-dos.net/msdos71/dos71_2.zip (optional)

You can also make the two 1.44MB IMG floppy disk images into 720KB, 1.44MB, or 2.88MB boot images of the CD for installation. Here is its CD installation version:

Installation CD: http://help.cn-dos.net/soft/dos71cd.zip

For the IMG file, use software such as HD-COPY, WinImage to expand it to the floppy disk and boot it. And it can also run normally in virtual machines (such as Virtual PC, VMWare, Bochs)! So you can also test or use this full MS-DOS 7.10 installation version in the virtual machine.

For more information, please see the detailed introduction below. It is strongly recommended to read this article carefully first. There are also some relevant materials and screen shots, etc.):

http://www.cn-dos.net/newdos/dosart32.htm

Floor1　Wengier	Posted 2003-07-26 00:00
系统支持　Posts 10,521　Credits 27,736
Everyone knows that MS-DOS 7.10 is a very powerful, practical, well-compatible, and most widely used DOS operating system. For example, it supports various FAT12, FAT16, FAT32 partitions, large hard disks, large memory, long file names, etc. And on it, you can use the WIN command to start the famous GUI programs under DOS - Windows 3.x and Windows 9x. This is its full installation version. Its installation program is in a wizard mode. Through this installation program, everyone can easily install MS-DOS 7.10 to the system (hard disk). Characteristics of the installation program: operates in full-graphic mode, can choose the installation path (default is C:\DOS71), installation method (full installation, install only DOS commands, minimal installation), etc., and supports coexistence with Win9x, automatically identifies existing Windows NT/2K/XP or older versions of DOS (such as MS-DOS 6.x) in the system, and allows users to choose whether to automatically make a dual boot! Newly supports plug-in functions (there are plug-in downloads in the following posts, such as PDOS95 plug-in, CCDOS97, Windows GUI plug-in, etc., and there are also combined plug-in downloads)! Note: When the MS-DOS 7.10 installation version finds that the hard disk is not partitioned or formatted, the installation program will automatically partition, format, and activate the partition of the hard disk. Then continue the installation of MS-DOS 7.10. You can directly use the floppy disk installation version, that is, first make the installation floppy disk, then boot the system with installation disk 1, and then the complete installation of MS-DOS 7.10 will be automatically carried out (or run SETUP inside directly after booting from the hard disk), and follow the prompts to complete the installation: Now the MS-DOS 7.10 installation program (floppy disk version) has been uploaded to newdos.yginfo.net. The download addresses (note: the following addresses are permanent download addresses): Installation disk 1: http://www.cn-dos.net/msdos71/dos71_1.zip (required) Installation disk 2: http://www.cn-dos.net/msdos71/dos71_2.zip (optional) You can also make the two 1.44MB IMG floppy disk images into 720KB, 1.44MB, or 2.88MB boot images of the CD for installation. Here is its CD installation version: Installation CD: http://help.cn-dos.net/soft/dos71cd.zip For the IMG file, use software such as HD-COPY, WinImage to expand it to the floppy disk and boot it. And it can also run normally in virtual machines (such as Virtual PC, VMWare, Bochs)! So you can also test or use this full MS-DOS 7.10 installation version in the virtual machine. For more information, please see the detailed introduction below. It is strongly recommended to read this article carefully first. There are also some relevant materials and screen shots, etc.): http://www.cn-dos.net/newdos/dosart32.htm

Floor2　pizigao	Posted 2003-07-26 00:00
银牌会员　Posts 292　Credits 1,063
Alright!

Floor3　Roy	Posted 2003-07-26 00:00
管理员　Posts 1,633　Credits 4,869
Already downloaded!!

Floor4　Wengier	Posted 2003-07-26 00:00
系统支持　Posts 10,521　Credits 27,736
Nice! Welcome everyone to use it~~ It's very powerful and practical...

Floor5　savioler	Posted 2003-07-26 00:00
中级用户　Posts 136　Credits 422
Hello

Floor6　cn_archer	Posted 2003-07-26 00:00
元老会员　Posts 991　Credits 2,903　From 福建省
Alright! Wengier is a great idol of ours!

Floor7　maple	Posted 2003-07-26 00:00
中级用户　Posts 137　Credits 417
very good! thank you!

Floor8　Roy	Posted 2003-07-26 00:00
管理员　Posts 1,633　Credits 4,869
Top

Floor9　Roy	Posted 2003-07-26 00:00
管理员　Posts 1,633　Credits 4,869
Can add "Refuse to install MS-DOS 7.10 under the NTFS system"

Floor10　Wengier	Posted 2003-07-26 00:00
系统支持　Posts 10,521　Credits 27,736
It's still not good to join GDISK for hard disk partitioning and other operations... Because the partition adjustment must restart the system to take effect. So let users get their hard disks sorted out first and then run this MS-DOS 7.10 installation program.

Floor11　jssyq	Posted 2003-07-26 00:00
银牌会员　Posts 498　Credits 1,231
Support

Floor12　linjun	Posted 2003-07-27 00:00
初级用户　Posts 11　Credits 138
好的！

Floor13　Roy	Posted 2003-07-27 00:00
管理员　Posts 1,633　Credits 4,869
The second edition of the floppy disk installation has been uploaded!!

Floor14　Wengier	Posted 2003-07-27 00:00
系统支持　Posts 10,521　Credits 27,736
*The following is the statement of Roy* on 2003-7-27 15:20:44:** The second version of the floppy disk installation has been uploaded!! The first installation floppy disk (not the installed hard disk) of this second version cannot boot, while the first version uploaded earlier can boot normally. Is there a problem with the system files this time?

Floor15　danny_8384	Posted 2003-07-27 00:00
初级用户　Posts 3　Credits 106
Hello everyone! I'm new here. As soon as I found this place, I immediately fell in love with it. I hope this forum will get better and better!