中国DOS联盟论坛

China DOS Union

-- Unite DOS · Advance DOS · Grow DOS --
Union site: www.cn-dos.net Forum site: www.cn-dos.net/forum
Guest | Log in | Register | Members | Search | China DOS Union
中国DOS联盟论坛
The time now is 2026-09-06 07:05
47,812 topics / 349,914 posts / today 0 new / 48,268 members
DOS启动盘 & LOGO技术 (启动盘室) » There is such an MS - DOS 7.1 full version image
Printable Version  3,198 / 4
Floor1 ytgbl Posted 2010-02-15 17:22
新手上路 Posts 7 Credits 18
May I ask:
Is there such a full version image of MS-DOS 7.1, which can be written to a USB flash drive in zip+ format using UltraISO, and then when the USB flash drive is inserted into a computer, MS-DOS 7.1 can be run from the USB flash drive? And the drive letter of the USB flash drive is A. Later, as long as this USB flash drive is taken along, when plugged into any computer, MS-DOS 7.1 can be entered?
I have tried many methods:
1. Using usbboot, but the zip format of usbboot does not support USB flash drives larger than 256M. If it is larger than 256M, the HDD format must be used, and zip+ and HDD+ are not supported. It should be known that zip+ has the best compatibility.
2. Using flashboot. Although it supports large-capacity USB flash drives, it also has the problem of not supporting zip+ and HDD+ formats. And when using flashboot, Norton AntiVirus software needs to be turned off, otherwise Norton will recognize it as a virus and kill it.
I have used the Perfecter Maintenance System USB flash drive version, which is written to the USB flash drive in zip+ format using UltraISO. There are many things in it, including MaxDOS, but it is not pure MS-DOS 7.1. I just want pure MS-DOS 7.1. I just want to be able to get an image of the full version of MS-DOS 7.1 that can be written to a USB flash drive in zip+ format using UltraISO.
Floor2 yys5161 Posted 2010-02-17 01:04
新手上路 Posts 5 Credits 10
This idea is pretty good, waiting to learn.
Floor3 doslike Posted 2010-02-24 17:33
版主 Posts 285 Credits 326 From 黑龙江省
In this new DOS era, there is
Floor4 interdrp Posted 2010-02-24 21:50
新手上路 Posts 3 Credits 6
Floor5 bipy Posted 2010-06-19 18:22
初级用户 Posts 9 Credits 20
The U disk mass production read-only partition was successful, and the files in the read-only partition disk can be read under winxp, but the drive letter of the read-only partition cannot be found under DOS. Please ask which expert can help give some advice, thank you in advance here
[ Contact the Union admin team - 中国DOS联盟 - Standard version ]
Sponsored by ifanr Inc | © 2001–2023