How to integrate the USB2.0 driver into the ROM-DOS7.10.ISO image file? - China DOS Union Forum

As the title...

[ Last edited by 5q8 on 2010-1-18 at 13:28 ]

Most motherboards come with USB drivers in the BIOS, so you don't need to add additional drivers. After booting from a USB flash drive, you can read and write to the USB flash drive. For flashing the BIOS, a pure DOS boot USB drive with only three commonly used files is often used for operation. If you need to add drivers yourself, you need to edit files like config.sys and autoexec.bat by yourself, which is also very simple. Just find relevant content on the Internet and practice it. It's best to install a virtual machine software like VM on the computer, which is very convenient for testing.

Thanks to 2gg big for the guidance!!!!!

[ Last edited by 5q8 on 2010-1-18 at 13:31 ]

2gg, I know you're an expert. Just be a good Samaritan and pass on a ready-made one. I really want to get it. I'm completely incapable of editing files like config.sys, autoexec.bat, etc. (so noob. Sweat)

1. Administrator Yulu provided the download address for the ROM-DOS7.10IMG file:
http://e.ys168.com/?afnspy
-->> Enter Yulu's network disk and download under the directory "China DOS Union"

2. I really don't know where to download this USB2.0 driver for integration.
Once again, I'm asking for help from 2gg!

[ Last edited by 5q8 on 2010-1-18 at 13:45 ]

I followed your method, after converting the following DOS into ISO image files, I made all of them into bootable disks. When I used UltraISO to write to the USB flash drive, they could all boot normally. But when I entered the USB flash drive drive letter, that is, entered F: (F: is the USB flash drive drive letter) A:\>F:
After pressing Enter, it jumped back to A:\>_
Access is denied. I don't know what's going on? These DOS boot disk instructions all say they support USB flash drives, and I specially found them, but none can enter the USB flash drive. Relying solely on the motherboard BIOS support may not be enough.

==================================================================
DOS Boot Disk (Recognize Flash Memory) 3.0 Chinese Version
USB30.IMG
==================================================================
DOS Boot Disk (Support USB Devices)
USB.IMG
==================================================================
http://www.cn-dos.net/forum/viewthread.php?tid=19426&fpage=1
Super Boot Disk GrubDisk 20060308
grubdisk.IMG
==================================================================
http://www.cn-dos.net/forum/viewthread.php?tid=17237&fpage=1
Super Chinese MS-DOS7.10 Boot Disk
Dos.img
==================================================================
http://www.cn-dos.net/forum/viewthread.php?tid=10150&fpage=1
The Strongest Super Boot Multi-system Maintenance Disk in the World (SBMSR400)
SBMSR320.IMA
================================================================

[ Last edited by 5q8 on 2010-1-19 at 23:11 ]

Floor1　5q8	Posted 2010-01-13 02:27
初级用户　Posts 23　Credits 53
As the title... [ Last edited by 5q8 on 2010-1-18 at 13:28 ]

Floor2　2gg	Posted 2010-01-13 21:27
初级用户　Posts 10　Credits 20
Most motherboards come with USB drivers in the BIOS, so you don't need to add additional drivers. After booting from a USB flash drive, you can read and write to the USB flash drive. For flashing the BIOS, a pure DOS boot USB drive with only three commonly used files is often used for operation. If you need to add drivers yourself, you need to edit files like config.sys and autoexec.bat by yourself, which is also very simple. Just find relevant content on the Internet and practice it. It's best to install a virtual machine software like VM on the computer, which is very convenient for testing.

Floor3　5q8	Posted 2010-01-13 22:42
初级用户　Posts 23　Credits 53
Thanks to 2gg big for the guidance!!!!! [ Last edited by 5q8 on 2010-1-18 at 13:31 ]

Floor4　5q8	Posted 2010-01-18 13:27
初级用户　Posts 23　Credits 53
2gg, I know you're an expert. Just be a good Samaritan and pass on a ready-made one. I really want to get it. I'm completely incapable of editing files like config.sys, autoexec.bat, etc. (so noob. Sweat) 1. Administrator Yulu provided the download address for the ROM-DOS7.10IMG file: http://e.ys168.com/?afnspy -->> Enter Yulu's network disk and download under the directory "China DOS Union" 2. I really don't know where to download this USB2.0 driver for integration. Once again, I'm asking for help from 2gg! [ Last edited by 5q8 on 2010-1-18 at 13:45 ]

Floor5　2gg	Posted 2010-01-19 15:09
初级用户　Posts 10　Credits 20
Here is http://bbs.wuyou.com/viewthread.php?tid=148793&extra=page%3D1

Floor6　5q8	Posted 2010-01-19 23:06
初级用户　Posts 23　Credits 53
I followed your method, after converting the following DOS into ISO image files, I made all of them into bootable disks. When I used UltraISO to write to the USB flash drive, they could all boot normally. But when I entered the USB flash drive drive letter, that is, entered F: (F: is the USB flash drive drive letter) A:\>F: After pressing Enter, it jumped back to A:\>_ Access is denied. I don't know what's going on? These DOS boot disk instructions all say they support USB flash drives, and I specially found them, but none can enter the USB flash drive. Relying solely on the motherboard BIOS support may not be enough. ================================================================== DOS Boot Disk (Recognize Flash Memory) 3.0 Chinese Version USB30.IMG ================================================================== DOS Boot Disk (Support USB Devices) USB.IMG ================================================================== http://www.cn-dos.net/forum/viewthread.php?tid=19426&fpage=1 Super Boot Disk GrubDisk 20060308 grubdisk.IMG ================================================================== http://www.cn-dos.net/forum/viewthread.php?tid=17237&fpage=1 Super Chinese MS-DOS7.10 Boot Disk Dos.img ================================================================== http://www.cn-dos.net/forum/viewthread.php?tid=10150&fpage=1 The Strongest Super Boot Multi-system Maintenance Disk in the World (SBMSR400) SBMSR320.IMA ================================================================ [ Last edited by 5q8 on 2010-1-19 at 23:11 ]