MaxDOS 7.1 Standard Edition Integrated GHOST 11.5
Software Name: MaxDOS 7.1 Standard Edition Integrated GHOST 11.5
Software Size: 6.33 MB
Software Language: Simplified Chinese
Software Category: Domestic Software/Other Systems
License Type: Special Software
Applicable Platforms: Win Vista/Win2003/WinXP/Win2000
Update Time: 2009-01-13 14:10
Developer: http://pzz.cn/bbs/index.php
Software MD5: a98c0eb9441f769e8afd054481acdbd7
Software Rating:
Download Page: http://old.xiazaiba.com/downinfo/440.html
Download Address:
Telecom Download Points:
Dongguan Telecom:http://dx1.xiazaiba.com/0901/0113/MaxDOS_71_G115_XiaZaiBa.rar
Anhui Telecom:http://dx2.xiazaiba.com/0901/0113/MaxDOS_71_G115_XiaZaiBa.rar
Netcom Download Points:
Guangdong Netcom:http://wt0.xiazaiba.com/0901/0113/MaxDOS_71_G115_XiaZaiBa.rar
Guangdong Netcom:http://wt1.xiazaiba.com/0901/0113/MaxDOS_71_G115_XiaZaiBa.rar
Education Network Download Point:
Education Network:http://edu.xiazaiba.com/0901/0113/MaxDOS_71_G115_XiaZaiBa.rar
Software Introduction: Also released:
Hard disk version supports Windows 2000, XP, 2003 versions, integrated GHOST 8.2 and GHOST 11.5 versions
PXE network boot version integrated GHOST 8.2 and GHOST 11.5 versions
MaxDOS network cloning server version 2.0
For the download address, please see below this post.
Main improvements on January 11: support for issues with memory greater than 4G, and blue screen issues when installing on 2003 system
Increased integration of PQ, DM enhanced version, and CD version
MaxDOS 7.1 updates as follows:
Network cloning server upgraded to MAXNGS 2.0
Fixed that the DHCP of the network cloning server can only provide one IP address at the same time, and the second machine cannot obtain an IP address.
Fixed that when DHCP assigns an IP, one machine is assigned two IPs. Fixed that TFTP cannot transfer multiple processes at the same time.
Added multi-segment function. When using a large segment, you can set that when the number of machines exceeds a certain number, it automatically jumps to the next segment. Theoretically supports unlimited number of client machines. Added scheme function. After the first setup is completed, the scheme will be automatically saved, and no need to set again next time.
MAXDOS client:
Added a new bootloader, mainly to solve the boot problems of some special motherboards or some special chip sets,
especially for the boot problems of laptops, and the fixes for the startup screen flicker or restart issues of the original 7.0 version.
Added support for 64-bit operating systems, mainly for the support issues of 64-bit VISTA and 2008 SERVER.
Added support for traditional Chinese operating systems, and traditional Chinese operating systems can display traditional Chinese characters normally.
Increased software compatibility, increased prompt for whether the backup directory is created successfully, so as to avoid one-key restoration failure.
Improved Realtek TEL8169 network card driver issues. Added some new network card drivers.
Fixed that NVIDIA automatically identifies the network card and gets stuck, changed to prompt for manual loading. Added NDIS driver manual selection menu.
Fixed the problem that an error occurs when manually loading the network card driver during automatic network cloning.
Included the drivers from the network card driver collection post in the top sticky post up to December 10. Updated built-in common software.
Updated the console to 2.0, which can display the boot mode status and add the function to switch between new and old versions of the bootloader.
Friendly reminder, if your motherboard is of NVIDIA chipset and cannot identify the network card, please try to use manual addition of NVIDIA driver.
There are other functions that cannot be listed one by one.
===============================================================================
Software characteristic functions are as follows:
1. Add a DOS entry for the installed Win2K/XP/2K3/VISTA/2008 system, which is convenient for maintenance and backup/restore of the system.
2. Support setting a password when entering DOS. The password is encrypted with MD5. It is a pure green software and does not write to the boot sector.
3. Built-in more than 200 network card drivers to realize GHOST network cloning and access to shared resources in the LAN under DOS.
4. All-Chinese operation mode, making it simpler for you to use. Supports displaying Chinese and五笔pinyin input under DOS.
5. Completely fool-proof network cloning mode, allowing users who have not used this software to easily realize network cloning.
6. Support booting from self-made IMG images, and support booting from self-made IMG images of unlimited size.
7. Fully automated Chinese one-key restore/backup, making it more convenient for you to backup/restore the system.
8. Support the system disk as an NTFS partition, support reading, modifying, deleting, and copying content of the NTFS partition.
9. Built-in software such as NT system password clearing, DISKGEN, SPFDISK, Ghost and other software.
10. Support setting DOS drivers such as SATA, SCSI, 1394, USB, PCMCIA, etc., and can access directly under DOS.
11. The first to create a unique comprehensive support for nVIDIA full-series network card network cloning. For more exciting content, please refer to the "Instruction File".
===============================================================================
Precautions and common problems when using MaxDOS 7.1:
Important 1: If you have a dual system installed in your machine and have VISTA or 2008 system, please do not install MaxDOS in your VISTA or 2008 system, otherwise MaxDOS may not start normally. Please download the special version from our website.
Important 2: Version 7.1 requires the support of a special network cloning server. Please download the network cloning server before network cloning, and set up the server before entering the client network cloning. The download address for the server and the network cloning tutorial: http://pzz.cn/bbs/read.php?tid=50400
Please turn off other DHCP servers in the LAN before network cloning to avoid IP address allocation conflicts and failure to connect to the server.
Important 3: The Max anti-virus function of version 7.1 requires a special anti-virus control server. If you install the anti-virus client, please download the special anti-virus server from our website http://pzz.cn/bbs/read.php?tid=50433 to realize the anti-virus function. If you do not need this function, you can uninstall it in the Add or Remove Programs in the Control Panel.
Important 4: The Max anti-virus function in version 7.1 is mainly designed for Internet cafes or enterprise networks. It is not recommended for home or personal users. Since this function requires a special server to support management, it is not suitable.
Important 5: GHOST11 still has the problem of not automatically splitting volumes, which will lead to the problem that the GHOSTSRV is not a valid image. If you manually backup the image, please add the -split=2000 parameter. The format is like Ghost -split=2000.
Important 6: If you have problems entering GHOST or waiting for a long time to appear the operation interface when running GHOST on your machine, please try to add -no1394 -nousb -noide parameters before running. The format is like Ghost -no1394 -nousb -noide
Important 7: The image made by GHOST11 cannot be recognized by GHOST83 and GHOST82. That is to say, if your client machine still uses GHOST82, you must use GHOST82 to make a full-disk image when making the network cloning image.
6. Please be sure to carefully read the instruction file before use. Otherwise, if there are problems with use, the author is not responsible for anything.
7. MaxDOS can freely set a password during installation. The password cannot be modified after installation. If not modified, the default password is empty.
8. MaxDOS supports WIN 2K/XP/2003/VISTA/2008. Does not support WIN9X/ME. Please download the special version for VISTA/2008.
9. Please decompress the RAR compressed package and install MaxDOS, and close other irrelevant programs to avoid unknown errors.
10. When setting the startup waiting time to: 0 during installation, then the entry option of MaxDOS will not appear during startup, and the system startup speed will also be faster. To enter MaxDOS, please press the F8 key violently during startup. When the WINDOWS menu appears, press the ESC key.
11. If you have multiple hard disks, please hang the hard disk that boots your MaxDOS system on the IDE1 interface and set it as the first boot device. If the SATA hard disk cannot boot, please set the working mode of the hard disk in the BIOS to: Compatible Mode.
12. Please do not use NTFS disk compression function after installing MaxDOS, otherwise MaxDOS will be damaged. Please turn off this function when using.
13. If you cannot start or freeze halfway after installation, please try to enter the BIOS to load the default advanced settings and try.
14. Manual operation of GHOST backup/restore system, use tutorial http://pzz.cn/bbs/read.php?tid=26423
15. GHOST backup occupies space and cannot find the backup file http://pzz.cn/bbs/read.php?tid=23699
16. Solution to GHOST not being a valid GHO image http://pzz.cn/bbs/read.php?tid=14535
17. Common problems and experience sharing of GHOST network cloning http://pzz.cn/bbs/read.php?tid=1585
18. Making a GHOST image to the network server http://pzz.cn/bbs/read.php?tid=10705
19. Tutorial for making a GHOST full-disk image (full backup) http://pzz.cn/bbs/read.php?tid=26435
20. For more common problems and use help, please refer to http://pzz.cn/bbs/read.php?tid=8505
21. To uninstall this software, please go to "Control Panel->Add or Remove Programs->Find MaxDOS and click Delete!
===============================================================================
After MaxDOS 7.1 is installed and started, there are 7 main options in the first menu.
First menu main option A. MaxDOS Toolbox
The built-in tools of MaxDOS, it is recommended to run in this item. The following is a brief introduction to all built-in commands and tools.
12.bat Copy the data of the first hard disk to the second hard disk through ghost.
21.bat Copy the data of the second hard disk to the first hard disk through ghost.
Chang.bat Load the display support for long file names in command line mode. Chang /q to exit.
CDM.bat Call the CD-ROM driver menu under any menu to quickly load the CD-ROM driver.
Exlan.bat If you want to manually clone the network, please run this to extract the dos pack network card driver.
Gh.bat The automatic one-key backup and restore menu under MaxDOS.
Spfdisk.exe Startup manager + partition manager, powerful
Help.bat MaxDOS program help file. Here I am ^_^.
Idecd.bat Quickly load the ide CD-ROM driver under any menu and any position.
Satacd.bat Quickly load the SATA CD-ROM driver under any menu and any position.
Loadiso.bat Dos loads the iso CD-ROM image. Can only read, cannot boot. But can install 2k/xp/2k3 system.
First switch to the directory where the iso is stored. Enter Loadiso Xx.iso (xx is the image file name).
Uniso.bat Uninstall the iso command loaded by the previous command.
M.bat Main menu of MaxDOS Toolbox.
Mouse.bat Mouse driver program. Please run it first if you need mouse operation. Mouse /q to exit support.
Ndisgo.bat For the command line mode full-disk network cloning of the old version, the format is: Ndisgo Xx
Ndisgx.bat For the command line mode single partition network cloning of the old version, the format is: Ndisgx Xx
Ngo.bat Main network cloning menu under the Ndis2 network card driver option.
PWD.exe Clear the user password of 2k/xp/2k3/Vista/2008 system under Dos. Supports NTFS partition.
Pgo.bat Main network cloning menu under the Packet network card driver option.
Sngo.bat Manually select and load the NDIS network card driver for network cloning.
3c90xgo.bat 3com90x series pack driver old version command line mode full-disk network cloning batch processing.
3c90xgx.bat 3com90x series pack driver old version command line mode single partition network cloning batch processing.
8029go.bat Realtek 8029 series pack driver old version command line mode full-disk network cloning batch processing.
8029gx.bat Realtek 8029 series pack driver old version command line mode single partition network cloning batch processing.
8139go.bat Realtek 8139 series pack driver old version command line mode full-disk network cloning batch processing.
8139gx.bat Realtek 8139 series pack driver old version command line mode single partition network cloning batch processing.
Dcn530go.bat Dcn-530tx series pack driver old version command line mode full-disk network cloning batch processing.
Dcn530gx.bat Dcn-530tx series pack driver old version command line mode single partition network cloning batch processing.
Dfe530go.bat D-link Dfe-530tx series pack driver old version command line mode full-disk network cloning batch processing.
Dfe530gx.bat D-link Dfe-530tx series pack driver old version command line mode single partition network cloning batch processing.
Dle530go.bat Lenovo dle530 series pack driver old version command line mode full-disk network cloning batch processing.
Dle530gx.bat Lenovo dle530 series pack driver old version command line mode single partition network cloning batch processing.
Ip100go.bat Ic Plus Ip100 series pack driver old version command line mode full-disk network cloning batch processing.
Ip100gx.bat Ic Plus Ip100 series pack driver old version command line mode single partition network cloning batch processing.
Pro100go.bat Intel Pro100 series pack driver old version command line mode full-disk network cloning batch processing.
Pro100gx.bat Intel Pro100 series pack driver old version command line mode single partition network cloning batch processing.
Sis900go.bat Sis900 series pack driver old version command line mode full-disk network cloning batch processing.
Sis900gx.bat Sis900 series pack driver old version command line mode single partition network cloning batch processing.
T8139go.bat Tengda 8139d network card pack driver series old version command line mode full-disk network cloning batch processing.
T8139gx.bat Tengda 8139d network card pack driver series old version command line mode partition network cloning batch processing.
Via1go.bat Via other network card series pack driver series old version command line mode full-disk network cloning batch processing.
Via1gx.bat Via other network card series pack driver series old version command line mode partition network cloning batch processing.
Viagbgo.bat Via Rhine Iii series pack driver series old version command line mode full-disk network cloning batch processing.
Viagbgx.bat Via Rhine Iii series pack driver series old version command line mode partition network cloning batch processing.
Viago.bat Via Rhine 1/2 series pack driver series old version command line mode full-disk network cloning batch processing.
Viagx.bat Via Rhine 1/2 series pack driver series old version command line mode partition network cloning batch processing.
Tw.bat Tianhui Chinese support program, tw /s loads the Chinese input method of dos, tw /q exits Chinese support.
Usbcd.bat Quickly load the usb CD-ROM driver under any menu and any position.
Acopy.com Completely copy files and directories, including long file names and attributes. It is recommended to run smartdrv before running
Attrib.com File/folder attribute setting command.
Choice.com Choice command, returns the errorlevel value of the key pressed.
Coms.com A program to clear the cmos password and settings.
Deltree.com A tool to delete directories, subdirectories and files at the same time. Please be careful when operating.
Device.com Load.sys driver in command line mode.
Deldev.com Uninstall the.sys driver loaded by the previous command.
Dready.com Judge the drive status, check whether there is a CD in the CD-ROM, and whether the floppy disk is write-protected.
Edit.com Equivalent to Notepad.
Fakedisk.com Used to extract.img images.
Find.exe Text search tool.
Format.com Format fat32 partition command.
J.com Eject or close the CD-ROM tray.
Ri.com Memory clearing program. Must be resident first, then run other programs. Use ri /cls to clear
Label.com A very small tool to modify the disk volume label.
Mbr.com Disk mbr information backup and restore tool.
S.com Shut down the computer.
Pkzip.com Zip decompression tool.
R.com Restart the computer.
Subst.com Disk mapping tool.
Sys.com Transfer the boot file of msdos 7.01 to the c drive. Use the c drive to boot to dos.
Tree.com Directory tree display tool.
Debug.exe Powerful dos programming command.
Diskgen.exe Powerful Chinese partition software under dos. Always use it. Max strongly recommends it, better than dm.
Fdisk.exe Early dos partition command.
Ghost.exe System backup and restore tool. If ntfsdos is run, please exit with exit and then run.
Go.exe Directly jump to the directory, such as Go C:\windows.
Mem.exe Dos view memory usage.
Mousclip.exe Mouse clipboard program.
NtfsDOS.bat Ntfs partition read and write support. Use exit to exit.
Pctool.exe Similar to win explorer under dos
Smartdrv.exe Disk cache program under dos. Loading it can greatly improve the dos installation system.
Xcopy.exe Powerful copy program, can copy directories with folders. After loading tw, use xcopy /?
Xdel.exe Similar to rd under winnt, can delete files in directories and subdirectories.
Ezcopy.exe A domestic direct network cloning tool without making an image. The first machine running this program is the server.
Memtest.exe Dos memory test program. Please run under the option "F Pure DOS Mode".
Crdisk.exe Dos hardware restore card universal **** program. (Limited to enhanced version)
Diskfix.com Partition table repair tool, used to repair damaged partition program.
Pq.bat PQMAGIC hard disk partition management program. (Limited to enhanced version)
Dm.bat Quick partition DM 9.56 universal version. (Limited to enhanced version)
===============================================================================
First menu main option B. Fully Automatic Network Cloning
In order to realize fully automatic network cloning, the program will default to execute this option within 5 seconds and automatically load the network card driver, automatically enter the GHOST interface and wait for the server to send network cloning and other instructions (provided that the network cloning server has been prepared and set)
Version 7.1 requires the support of a special network cloning server. Please download the network cloning server before network cloning, and set up the server before performing client network cloning. The download address of the network cloning server: http://pzz.cn/bbs/read.php?tid=50400
The command line network cloning mode used in the previous 5.5S version still exists.
For details, please refer to this http://pzz.cn/bbs/read.php?tid=26430
Friendly reminder: You can also use the new network cloning mode and the old network cloning mode together to realize network cloning of two batches of machines at the same time.
The following are all series of network cards supported by fully automatic network cloning: (those with x represent multiple models)
3Com 3C900x/3C905x/3C920x/3C940x/3C2000x all series network cards.
ADMtek AN983x/AN985x/AN9511x/AN9513x all series network cards.
AMD PCNet Family all series network cards. | DAVICOM DM9 all series network cards.
Broadcom 440x 10/100x | Broadcom 570x 10/100/1000x all series network cards.
DEC Digital Semiconductor 21040x/21041x/21143x all series network cards.
DigitalChina DCN-530TX series network cards.
VIA Rhine Ix/Rhine IIx all series network cards. VIA Networking Gbx all series network cards.
IC Plus IP100x/IP100A all series network cards. IC Plus IP1000x all series network cards.
Intel PRO/100x/82562EHx/82559ERx/82562x | Intel PRO 1000x
Marvell Yukon 88E8001/8003/8010/8052/8050/8053/8039/8056 and other all series 100M/1000M network cards.
RealTek RTL8029/8139/810x/8110SC/RTL8169/8110/RTL8136/810x/8138/8111x all series.
SiS 900-Basedx | SiS190/SIS191x all series network cards. Including 100M/1000M
ULi PCI Fast Ethernet Controller | ULi Electronics Inc. all series network cards.
D-Link DFE-550TX/DGE-530TG/DFE0530tx all series network cards.
Sundance ST201 all series network cards |RADTEK RTK8189Cx all series network cards.
Attansic L1 Gigabit / Attansic L2 all series network cards.
Atheros AR8121/AR8113 all series network cards.
NVIDIA Network controller all series network cards.
This item supports about 300 kinds of 100M and 1000M network cards. Not all are listed above. If you do not know your network card model or are not sure whether it supports your network card, please choose this item. MaxDOS will help you automatically identify the network card and automatically load the driver.
===============================================================================
First menu main option C. Manual Network Cloning
Submenu option A. Packet network card driver
Version 7.1 requires the support of a special network cloning server. Please download the network cloning server before network cloning, and set up the server before performing client network cloning. The download address of the network cloning server: http://pzz.cn/bbs/read.php?tid=50400
The command line network cloning mode used in the previous 5.5S version still exists.
For details, please refer to this http://pzz.cn/bbs/read.php?tid=26430
Explanation: The built-in PACKET DOS network card driver option of MaxDOS. Since some network cards cannot identify the network card or identify it incorrectly after using the automatic network card identification function, this item is specially used as a manual selection mode.
PACKET network cards support the following types of network cards: (If your network card is not in this option, please use NDIS driver)
3C905PKT.com 3Com EtherLink PCI Bus Master Packet Driver (3COM 905)
3C90XPD.COM 3Com Fast EtherLink XL 10/100Mb TX Ethernet NIC (3C90X)
E310.COM Adico AE310-TX PCI 10/100 Fast Ethernet Adapter
AMDPCNET.com AMD PCnet Family
DCN530tx.COM DCN-530TX PCI Ethernet Adapter V1.00 (2002.0411)
DFE530TX.COM D-Link DLE-530TX PCI NIC (Rev B) V2.53 (2000.0525)
DLE530TX.COM D-Link DFE-530TX PCI NIC V4.10 (2002.0703)
IP100PD.COM IC Plus IP100 based Fast Ether Adapter V3.03 (2003.0411)
PRO100.COM Intel EtherExpress(tm) PRO/10 & PRO/100B PCI,(updated, available)
RTL8029.COM Realtek RTL8029(AS) PCI Ethernet NIC 1998
RTL8139.COM Realtek RTL8139 Family PCI Fast Ethernet NIC v3.40
SIS900.EXE SiS 900/7016 PCI Fast Ethernet Adapter V1.15 (2002.0816)
VIA.COM VIA Rhine I/II Family Fast Ether Adapter V4.16 (updated, available)
VIAGB.COM VIA Rhine III 1000M network card driver.
--------------------------------------------------------------------------------
Submenu option B. NDIS network card driver
Manually select the NDIS2 network card driver for network cloning, mainly used to drive the problem that some network cards cannot be identified.
--------------------------------------------------------------------------------
Submenu option C/D/E/F/G/H. nVIDIA 1/2/3/4/5/6 network card driver network cloning
Theoretically, this option supports all integrated soft network cards of nVIDIA, but since I have no conditions to test, I cannot confirm.
This option contains 6 versions of nVIDIA network card drivers, all collected and produced by Max one by one.
We suggest that all users using nVIDIA motherboard chipsets, if you cannot recognize your network card or cannot network clone normally using NDIS, please use these six options to test one by one to see which is available.
The order is arranged according to compatibility, V1-V6. Relatively speaking, V1 supports most NF4 and NF5 series network cards.
V2 supports NF1-NF4 series network cards, and other V3-V5 support some special PHY soft network cards.
You can switch and test one by one to see which is compatible with your motherboard, then use which. The operation method is all the same.
Version 7.1 requires the support of a special network cloning server. Please download the network cloning server before network cloning, and set up the server before performing client network cloning. The download address of the network cloning server: http://pzz.cn/bbs/read.php?tid=50400
The command line network cloning mode used in the previous 5.5S version still exists.
For details, please refer to this http://pzz.cn/bbs/read.php?tid=26430
Friendly reminder: You can also use the new network cloning mode and the old network cloning mode together to realize network cloning of two batches of machines at the same time.
===============================================================================
First menu main option D. Backup/Restore System
Used for fully automatic backup and restore of the system. When installing MaxDOS, you will be prompted to specify a folder to store the GHOST image. After specifying, a MaxBAK system hidden folder will be created in the specified location. If you delete the MaxBAK folder of this partition, the fully automatic backup and restore function will be invalid. Also: This function automatically backs up the first partition of the hard disk by default. If you want to modify the backup/restore source or target, please use Start Menu-Programs-Maisi Studio-"MaxDOS Console" to set.
===============================================================================
First menu main option E. Access Network Resources
After entering this item, the system will automatically help you load the network card driver and set up the connected protocol, and it is an all-Chinese menu. You can directly obtain the shared resources on the WINDOWS host in the LAN after entering this item, and support read-write operations. Of course, this requires you to enable permissions to realize write operations. You can operate according to the prompts in the menu, or you can use the NET command on the NT host to connect to the shared directory. The command line is like: net use z: \\max\f
The meaning of this command is to map the Z: disk to the shared directory named "f" on the "Max" host. You can refer to the NT NET command to use NET /? or NET USE /? to get help. Of course, some commands may not be supported.
Friendly reminder: You can only access your shared host through the machine name, not by using the IP address to connect to your host. And you can also use this item to perform network cloning operations, map to such as Z: disk, and then select the ".GHO" image in the Z: disk shared directory in GHOST for restoration or backup.
Note: The machine being accessed must install the IPX protocol and have the GUEST user enabled.
===============================================================================
First menu main option F. Drive USB/1394/SATA/CD/PCMCIA/SCSI Devices
Used to drive USB/1394/SATA/CD/PCMCIA/SCSI devices. After driving, you can access the content of the device under DOS!
===============================================================================
First menu main option G. Pure DOS Mode
Used to flash BIOS or run other special software, no drivers are loaded, no HIMEM, no virtual disk, and no common software package.
===============================================================================
Thanks to netizens: Sense, Ben Shi, Budian, Haitao, WANGRUILIN
Special thanks: Guozi, DDX13 assisted in developing supporting programs in the new version.
Thanks to all members who have supported the development of our website and all members in the forum and our colleagues who support us.
If you encounter problems during use, please go to our forum. Wish you a pleasant use :)
Software Name: MaxDOS 7.1 Standard Edition Integrated GHOST 11.5
Software Size: 6.33 MB
Software Language: Simplified Chinese
Software Category: Domestic Software/Other Systems
License Type: Special Software
Applicable Platforms: Win Vista/Win2003/WinXP/Win2000
Update Time: 2009-01-13 14:10
Developer: http://pzz.cn/bbs/index.php
Software MD5: a98c0eb9441f769e8afd054481acdbd7
Software Rating:
Download Page: http://old.xiazaiba.com/downinfo/440.html
Download Address:
Telecom Download Points:
Dongguan Telecom:http://dx1.xiazaiba.com/0901/0113/MaxDOS_71_G115_XiaZaiBa.rar
Anhui Telecom:http://dx2.xiazaiba.com/0901/0113/MaxDOS_71_G115_XiaZaiBa.rar
Netcom Download Points:
Guangdong Netcom:http://wt0.xiazaiba.com/0901/0113/MaxDOS_71_G115_XiaZaiBa.rar
Guangdong Netcom:http://wt1.xiazaiba.com/0901/0113/MaxDOS_71_G115_XiaZaiBa.rar
Education Network Download Point:
Education Network:http://edu.xiazaiba.com/0901/0113/MaxDOS_71_G115_XiaZaiBa.rar
Software Introduction: Also released:
Hard disk version supports Windows 2000, XP, 2003 versions, integrated GHOST 8.2 and GHOST 11.5 versions
PXE network boot version integrated GHOST 8.2 and GHOST 11.5 versions
MaxDOS network cloning server version 2.0
For the download address, please see below this post.
Main improvements on January 11: support for issues with memory greater than 4G, and blue screen issues when installing on 2003 system
Increased integration of PQ, DM enhanced version, and CD version
MaxDOS 7.1 updates as follows:
Network cloning server upgraded to MAXNGS 2.0
Fixed that the DHCP of the network cloning server can only provide one IP address at the same time, and the second machine cannot obtain an IP address.
Fixed that when DHCP assigns an IP, one machine is assigned two IPs. Fixed that TFTP cannot transfer multiple processes at the same time.
Added multi-segment function. When using a large segment, you can set that when the number of machines exceeds a certain number, it automatically jumps to the next segment. Theoretically supports unlimited number of client machines. Added scheme function. After the first setup is completed, the scheme will be automatically saved, and no need to set again next time.
MAXDOS client:
Added a new bootloader, mainly to solve the boot problems of some special motherboards or some special chip sets,
especially for the boot problems of laptops, and the fixes for the startup screen flicker or restart issues of the original 7.0 version.
Added support for 64-bit operating systems, mainly for the support issues of 64-bit VISTA and 2008 SERVER.
Added support for traditional Chinese operating systems, and traditional Chinese operating systems can display traditional Chinese characters normally.
Increased software compatibility, increased prompt for whether the backup directory is created successfully, so as to avoid one-key restoration failure.
Improved Realtek TEL8169 network card driver issues. Added some new network card drivers.
Fixed that NVIDIA automatically identifies the network card and gets stuck, changed to prompt for manual loading. Added NDIS driver manual selection menu.
Fixed the problem that an error occurs when manually loading the network card driver during automatic network cloning.
Included the drivers from the network card driver collection post in the top sticky post up to December 10. Updated built-in common software.
Updated the console to 2.0, which can display the boot mode status and add the function to switch between new and old versions of the bootloader.
Friendly reminder, if your motherboard is of NVIDIA chipset and cannot identify the network card, please try to use manual addition of NVIDIA driver.
There are other functions that cannot be listed one by one.
===============================================================================
Software characteristic functions are as follows:
1. Add a DOS entry for the installed Win2K/XP/2K3/VISTA/2008 system, which is convenient for maintenance and backup/restore of the system.
2. Support setting a password when entering DOS. The password is encrypted with MD5. It is a pure green software and does not write to the boot sector.
3. Built-in more than 200 network card drivers to realize GHOST network cloning and access to shared resources in the LAN under DOS.
4. All-Chinese operation mode, making it simpler for you to use. Supports displaying Chinese and五笔pinyin input under DOS.
5. Completely fool-proof network cloning mode, allowing users who have not used this software to easily realize network cloning.
6. Support booting from self-made IMG images, and support booting from self-made IMG images of unlimited size.
7. Fully automated Chinese one-key restore/backup, making it more convenient for you to backup/restore the system.
8. Support the system disk as an NTFS partition, support reading, modifying, deleting, and copying content of the NTFS partition.
9. Built-in software such as NT system password clearing, DISKGEN, SPFDISK, Ghost and other software.
10. Support setting DOS drivers such as SATA, SCSI, 1394, USB, PCMCIA, etc., and can access directly under DOS.
11. The first to create a unique comprehensive support for nVIDIA full-series network card network cloning. For more exciting content, please refer to the "Instruction File".
===============================================================================
Precautions and common problems when using MaxDOS 7.1:
Important 1: If you have a dual system installed in your machine and have VISTA or 2008 system, please do not install MaxDOS in your VISTA or 2008 system, otherwise MaxDOS may not start normally. Please download the special version from our website.
Important 2: Version 7.1 requires the support of a special network cloning server. Please download the network cloning server before network cloning, and set up the server before entering the client network cloning. The download address for the server and the network cloning tutorial: http://pzz.cn/bbs/read.php?tid=50400
Please turn off other DHCP servers in the LAN before network cloning to avoid IP address allocation conflicts and failure to connect to the server.
Important 3: The Max anti-virus function of version 7.1 requires a special anti-virus control server. If you install the anti-virus client, please download the special anti-virus server from our website http://pzz.cn/bbs/read.php?tid=50433 to realize the anti-virus function. If you do not need this function, you can uninstall it in the Add or Remove Programs in the Control Panel.
Important 4: The Max anti-virus function in version 7.1 is mainly designed for Internet cafes or enterprise networks. It is not recommended for home or personal users. Since this function requires a special server to support management, it is not suitable.
Important 5: GHOST11 still has the problem of not automatically splitting volumes, which will lead to the problem that the GHOSTSRV is not a valid image. If you manually backup the image, please add the -split=2000 parameter. The format is like Ghost -split=2000.
Important 6: If you have problems entering GHOST or waiting for a long time to appear the operation interface when running GHOST on your machine, please try to add -no1394 -nousb -noide parameters before running. The format is like Ghost -no1394 -nousb -noide
Important 7: The image made by GHOST11 cannot be recognized by GHOST83 and GHOST82. That is to say, if your client machine still uses GHOST82, you must use GHOST82 to make a full-disk image when making the network cloning image.
6. Please be sure to carefully read the instruction file before use. Otherwise, if there are problems with use, the author is not responsible for anything.
7. MaxDOS can freely set a password during installation. The password cannot be modified after installation. If not modified, the default password is empty.
8. MaxDOS supports WIN 2K/XP/2003/VISTA/2008. Does not support WIN9X/ME. Please download the special version for VISTA/2008.
9. Please decompress the RAR compressed package and install MaxDOS, and close other irrelevant programs to avoid unknown errors.
10. When setting the startup waiting time to: 0 during installation, then the entry option of MaxDOS will not appear during startup, and the system startup speed will also be faster. To enter MaxDOS, please press the F8 key violently during startup. When the WINDOWS menu appears, press the ESC key.
11. If you have multiple hard disks, please hang the hard disk that boots your MaxDOS system on the IDE1 interface and set it as the first boot device. If the SATA hard disk cannot boot, please set the working mode of the hard disk in the BIOS to: Compatible Mode.
12. Please do not use NTFS disk compression function after installing MaxDOS, otherwise MaxDOS will be damaged. Please turn off this function when using.
13. If you cannot start or freeze halfway after installation, please try to enter the BIOS to load the default advanced settings and try.
14. Manual operation of GHOST backup/restore system, use tutorial http://pzz.cn/bbs/read.php?tid=26423
15. GHOST backup occupies space and cannot find the backup file http://pzz.cn/bbs/read.php?tid=23699
16. Solution to GHOST not being a valid GHO image http://pzz.cn/bbs/read.php?tid=14535
17. Common problems and experience sharing of GHOST network cloning http://pzz.cn/bbs/read.php?tid=1585
18. Making a GHOST image to the network server http://pzz.cn/bbs/read.php?tid=10705
19. Tutorial for making a GHOST full-disk image (full backup) http://pzz.cn/bbs/read.php?tid=26435
20. For more common problems and use help, please refer to http://pzz.cn/bbs/read.php?tid=8505
21. To uninstall this software, please go to "Control Panel->Add or Remove Programs->Find MaxDOS and click Delete!
===============================================================================
After MaxDOS 7.1 is installed and started, there are 7 main options in the first menu.
First menu main option A. MaxDOS Toolbox
The built-in tools of MaxDOS, it is recommended to run in this item. The following is a brief introduction to all built-in commands and tools.
12.bat Copy the data of the first hard disk to the second hard disk through ghost.
21.bat Copy the data of the second hard disk to the first hard disk through ghost.
Chang.bat Load the display support for long file names in command line mode. Chang /q to exit.
CDM.bat Call the CD-ROM driver menu under any menu to quickly load the CD-ROM driver.
Exlan.bat If you want to manually clone the network, please run this to extract the dos pack network card driver.
Gh.bat The automatic one-key backup and restore menu under MaxDOS.
Spfdisk.exe Startup manager + partition manager, powerful
Help.bat MaxDOS program help file. Here I am ^_^.
Idecd.bat Quickly load the ide CD-ROM driver under any menu and any position.
Satacd.bat Quickly load the SATA CD-ROM driver under any menu and any position.
Loadiso.bat Dos loads the iso CD-ROM image. Can only read, cannot boot. But can install 2k/xp/2k3 system.
First switch to the directory where the iso is stored. Enter Loadiso Xx.iso (xx is the image file name).
Uniso.bat Uninstall the iso command loaded by the previous command.
M.bat Main menu of MaxDOS Toolbox.
Mouse.bat Mouse driver program. Please run it first if you need mouse operation. Mouse /q to exit support.
Ndisgo.bat For the command line mode full-disk network cloning of the old version, the format is: Ndisgo Xx
Ndisgx.bat For the command line mode single partition network cloning of the old version, the format is: Ndisgx Xx
Ngo.bat Main network cloning menu under the Ndis2 network card driver option.
PWD.exe Clear the user password of 2k/xp/2k3/Vista/2008 system under Dos. Supports NTFS partition.
Pgo.bat Main network cloning menu under the Packet network card driver option.
Sngo.bat Manually select and load the NDIS network card driver for network cloning.
3c90xgo.bat 3com90x series pack driver old version command line mode full-disk network cloning batch processing.
3c90xgx.bat 3com90x series pack driver old version command line mode single partition network cloning batch processing.
8029go.bat Realtek 8029 series pack driver old version command line mode full-disk network cloning batch processing.
8029gx.bat Realtek 8029 series pack driver old version command line mode single partition network cloning batch processing.
8139go.bat Realtek 8139 series pack driver old version command line mode full-disk network cloning batch processing.
8139gx.bat Realtek 8139 series pack driver old version command line mode single partition network cloning batch processing.
Dcn530go.bat Dcn-530tx series pack driver old version command line mode full-disk network cloning batch processing.
Dcn530gx.bat Dcn-530tx series pack driver old version command line mode single partition network cloning batch processing.
Dfe530go.bat D-link Dfe-530tx series pack driver old version command line mode full-disk network cloning batch processing.
Dfe530gx.bat D-link Dfe-530tx series pack driver old version command line mode single partition network cloning batch processing.
Dle530go.bat Lenovo dle530 series pack driver old version command line mode full-disk network cloning batch processing.
Dle530gx.bat Lenovo dle530 series pack driver old version command line mode single partition network cloning batch processing.
Ip100go.bat Ic Plus Ip100 series pack driver old version command line mode full-disk network cloning batch processing.
Ip100gx.bat Ic Plus Ip100 series pack driver old version command line mode single partition network cloning batch processing.
Pro100go.bat Intel Pro100 series pack driver old version command line mode full-disk network cloning batch processing.
Pro100gx.bat Intel Pro100 series pack driver old version command line mode single partition network cloning batch processing.
Sis900go.bat Sis900 series pack driver old version command line mode full-disk network cloning batch processing.
Sis900gx.bat Sis900 series pack driver old version command line mode single partition network cloning batch processing.
T8139go.bat Tengda 8139d network card pack driver series old version command line mode full-disk network cloning batch processing.
T8139gx.bat Tengda 8139d network card pack driver series old version command line mode partition network cloning batch processing.
Via1go.bat Via other network card series pack driver series old version command line mode full-disk network cloning batch processing.
Via1gx.bat Via other network card series pack driver series old version command line mode partition network cloning batch processing.
Viagbgo.bat Via Rhine Iii series pack driver series old version command line mode full-disk network cloning batch processing.
Viagbgx.bat Via Rhine Iii series pack driver series old version command line mode partition network cloning batch processing.
Viago.bat Via Rhine 1/2 series pack driver series old version command line mode full-disk network cloning batch processing.
Viagx.bat Via Rhine 1/2 series pack driver series old version command line mode partition network cloning batch processing.
Tw.bat Tianhui Chinese support program, tw /s loads the Chinese input method of dos, tw /q exits Chinese support.
Usbcd.bat Quickly load the usb CD-ROM driver under any menu and any position.
Acopy.com Completely copy files and directories, including long file names and attributes. It is recommended to run smartdrv before running
Attrib.com File/folder attribute setting command.
Choice.com Choice command, returns the errorlevel value of the key pressed.
Coms.com A program to clear the cmos password and settings.
Deltree.com A tool to delete directories, subdirectories and files at the same time. Please be careful when operating.
Device.com Load.sys driver in command line mode.
Deldev.com Uninstall the.sys driver loaded by the previous command.
Dready.com Judge the drive status, check whether there is a CD in the CD-ROM, and whether the floppy disk is write-protected.
Edit.com Equivalent to Notepad.
Fakedisk.com Used to extract.img images.
Find.exe Text search tool.
Format.com Format fat32 partition command.
J.com Eject or close the CD-ROM tray.
Ri.com Memory clearing program. Must be resident first, then run other programs. Use ri /cls to clear
Label.com A very small tool to modify the disk volume label.
Mbr.com Disk mbr information backup and restore tool.
S.com Shut down the computer.
Pkzip.com Zip decompression tool.
R.com Restart the computer.
Subst.com Disk mapping tool.
Sys.com Transfer the boot file of msdos 7.01 to the c drive. Use the c drive to boot to dos.
Tree.com Directory tree display tool.
Debug.exe Powerful dos programming command.
Diskgen.exe Powerful Chinese partition software under dos. Always use it. Max strongly recommends it, better than dm.
Fdisk.exe Early dos partition command.
Ghost.exe System backup and restore tool. If ntfsdos is run, please exit with exit and then run.
Go.exe Directly jump to the directory, such as Go C:\windows.
Mem.exe Dos view memory usage.
Mousclip.exe Mouse clipboard program.
NtfsDOS.bat Ntfs partition read and write support. Use exit to exit.
Pctool.exe Similar to win explorer under dos
Smartdrv.exe Disk cache program under dos. Loading it can greatly improve the dos installation system.
Xcopy.exe Powerful copy program, can copy directories with folders. After loading tw, use xcopy /?
Xdel.exe Similar to rd under winnt, can delete files in directories and subdirectories.
Ezcopy.exe A domestic direct network cloning tool without making an image. The first machine running this program is the server.
Memtest.exe Dos memory test program. Please run under the option "F Pure DOS Mode".
Crdisk.exe Dos hardware restore card universal **** program. (Limited to enhanced version)
Diskfix.com Partition table repair tool, used to repair damaged partition program.
Pq.bat PQMAGIC hard disk partition management program. (Limited to enhanced version)
Dm.bat Quick partition DM 9.56 universal version. (Limited to enhanced version)
===============================================================================
First menu main option B. Fully Automatic Network Cloning
In order to realize fully automatic network cloning, the program will default to execute this option within 5 seconds and automatically load the network card driver, automatically enter the GHOST interface and wait for the server to send network cloning and other instructions (provided that the network cloning server has been prepared and set)
Version 7.1 requires the support of a special network cloning server. Please download the network cloning server before network cloning, and set up the server before performing client network cloning. The download address of the network cloning server: http://pzz.cn/bbs/read.php?tid=50400
The command line network cloning mode used in the previous 5.5S version still exists.
For details, please refer to this http://pzz.cn/bbs/read.php?tid=26430
Friendly reminder: You can also use the new network cloning mode and the old network cloning mode together to realize network cloning of two batches of machines at the same time.
The following are all series of network cards supported by fully automatic network cloning: (those with x represent multiple models)
3Com 3C900x/3C905x/3C920x/3C940x/3C2000x all series network cards.
ADMtek AN983x/AN985x/AN9511x/AN9513x all series network cards.
AMD PCNet Family all series network cards. | DAVICOM DM9 all series network cards.
Broadcom 440x 10/100x | Broadcom 570x 10/100/1000x all series network cards.
DEC Digital Semiconductor 21040x/21041x/21143x all series network cards.
DigitalChina DCN-530TX series network cards.
VIA Rhine Ix/Rhine IIx all series network cards. VIA Networking Gbx all series network cards.
IC Plus IP100x/IP100A all series network cards. IC Plus IP1000x all series network cards.
Intel PRO/100x/82562EHx/82559ERx/82562x | Intel PRO 1000x
Marvell Yukon 88E8001/8003/8010/8052/8050/8053/8039/8056 and other all series 100M/1000M network cards.
RealTek RTL8029/8139/810x/8110SC/RTL8169/8110/RTL8136/810x/8138/8111x all series.
SiS 900-Basedx | SiS190/SIS191x all series network cards. Including 100M/1000M
ULi PCI Fast Ethernet Controller | ULi Electronics Inc. all series network cards.
D-Link DFE-550TX/DGE-530TG/DFE0530tx all series network cards.
Sundance ST201 all series network cards |RADTEK RTK8189Cx all series network cards.
Attansic L1 Gigabit / Attansic L2 all series network cards.
Atheros AR8121/AR8113 all series network cards.
NVIDIA Network controller all series network cards.
This item supports about 300 kinds of 100M and 1000M network cards. Not all are listed above. If you do not know your network card model or are not sure whether it supports your network card, please choose this item. MaxDOS will help you automatically identify the network card and automatically load the driver.
===============================================================================
First menu main option C. Manual Network Cloning
Submenu option A. Packet network card driver
Version 7.1 requires the support of a special network cloning server. Please download the network cloning server before network cloning, and set up the server before performing client network cloning. The download address of the network cloning server: http://pzz.cn/bbs/read.php?tid=50400
The command line network cloning mode used in the previous 5.5S version still exists.
For details, please refer to this http://pzz.cn/bbs/read.php?tid=26430
Explanation: The built-in PACKET DOS network card driver option of MaxDOS. Since some network cards cannot identify the network card or identify it incorrectly after using the automatic network card identification function, this item is specially used as a manual selection mode.
PACKET network cards support the following types of network cards: (If your network card is not in this option, please use NDIS driver)
3C905PKT.com 3Com EtherLink PCI Bus Master Packet Driver (3COM 905)
3C90XPD.COM 3Com Fast EtherLink XL 10/100Mb TX Ethernet NIC (3C90X)
E310.COM Adico AE310-TX PCI 10/100 Fast Ethernet Adapter
AMDPCNET.com AMD PCnet Family
DCN530tx.COM DCN-530TX PCI Ethernet Adapter V1.00 (2002.0411)
DFE530TX.COM D-Link DLE-530TX PCI NIC (Rev B) V2.53 (2000.0525)
DLE530TX.COM D-Link DFE-530TX PCI NIC V4.10 (2002.0703)
IP100PD.COM IC Plus IP100 based Fast Ether Adapter V3.03 (2003.0411)
PRO100.COM Intel EtherExpress(tm) PRO/10 & PRO/100B PCI,(updated, available)
RTL8029.COM Realtek RTL8029(AS) PCI Ethernet NIC 1998
RTL8139.COM Realtek RTL8139 Family PCI Fast Ethernet NIC v3.40
SIS900.EXE SiS 900/7016 PCI Fast Ethernet Adapter V1.15 (2002.0816)
VIA.COM VIA Rhine I/II Family Fast Ether Adapter V4.16 (updated, available)
VIAGB.COM VIA Rhine III 1000M network card driver.
--------------------------------------------------------------------------------
Submenu option B. NDIS network card driver
Manually select the NDIS2 network card driver for network cloning, mainly used to drive the problem that some network cards cannot be identified.
--------------------------------------------------------------------------------
Submenu option C/D/E/F/G/H. nVIDIA 1/2/3/4/5/6 network card driver network cloning
Theoretically, this option supports all integrated soft network cards of nVIDIA, but since I have no conditions to test, I cannot confirm.
This option contains 6 versions of nVIDIA network card drivers, all collected and produced by Max one by one.
We suggest that all users using nVIDIA motherboard chipsets, if you cannot recognize your network card or cannot network clone normally using NDIS, please use these six options to test one by one to see which is available.
The order is arranged according to compatibility, V1-V6. Relatively speaking, V1 supports most NF4 and NF5 series network cards.
V2 supports NF1-NF4 series network cards, and other V3-V5 support some special PHY soft network cards.
You can switch and test one by one to see which is compatible with your motherboard, then use which. The operation method is all the same.
Version 7.1 requires the support of a special network cloning server. Please download the network cloning server before network cloning, and set up the server before performing client network cloning. The download address of the network cloning server: http://pzz.cn/bbs/read.php?tid=50400
The command line network cloning mode used in the previous 5.5S version still exists.
For details, please refer to this http://pzz.cn/bbs/read.php?tid=26430
Friendly reminder: You can also use the new network cloning mode and the old network cloning mode together to realize network cloning of two batches of machines at the same time.
===============================================================================
First menu main option D. Backup/Restore System
Used for fully automatic backup and restore of the system. When installing MaxDOS, you will be prompted to specify a folder to store the GHOST image. After specifying, a MaxBAK system hidden folder will be created in the specified location. If you delete the MaxBAK folder of this partition, the fully automatic backup and restore function will be invalid. Also: This function automatically backs up the first partition of the hard disk by default. If you want to modify the backup/restore source or target, please use Start Menu-Programs-Maisi Studio-"MaxDOS Console" to set.
===============================================================================
First menu main option E. Access Network Resources
After entering this item, the system will automatically help you load the network card driver and set up the connected protocol, and it is an all-Chinese menu. You can directly obtain the shared resources on the WINDOWS host in the LAN after entering this item, and support read-write operations. Of course, this requires you to enable permissions to realize write operations. You can operate according to the prompts in the menu, or you can use the NET command on the NT host to connect to the shared directory. The command line is like: net use z: \\max\f
The meaning of this command is to map the Z: disk to the shared directory named "f" on the "Max" host. You can refer to the NT NET command to use NET /? or NET USE /? to get help. Of course, some commands may not be supported.
Friendly reminder: You can only access your shared host through the machine name, not by using the IP address to connect to your host. And you can also use this item to perform network cloning operations, map to such as Z: disk, and then select the ".GHO" image in the Z: disk shared directory in GHOST for restoration or backup.
Note: The machine being accessed must install the IPX protocol and have the GUEST user enabled.
===============================================================================
First menu main option F. Drive USB/1394/SATA/CD/PCMCIA/SCSI Devices
Used to drive USB/1394/SATA/CD/PCMCIA/SCSI devices. After driving, you can access the content of the device under DOS!
===============================================================================
First menu main option G. Pure DOS Mode
Used to flash BIOS or run other special software, no drivers are loaded, no HIMEM, no virtual disk, and no common software package.
===============================================================================
Thanks to netizens: Sense, Ben Shi, Budian, Haitao, WANGRUILIN
Special thanks: Guozi, DDX13 assisted in developing supporting programs in the new version.
Thanks to all members who have supported the development of our website and all members in the forum and our colleagues who support us.
If you encounter problems during use, please go to our forum. Wish you a pleasant use :)