China DOS Union

The server is Windows 2000 adv Server edition.

Installed protocols: Microsoft client, Client for netware, tcp/ip, NWLink netbios, ipx/netbios, Microsoft file and printer share.

DHCP is installed on the server, and the fixed IP is 192.168.1.1.

Shared the e:\share folder.

The client is used under DOS, and the diskless DOS uses FTFP32 + winima.

The running commands are:
net init --> execution successful
NWLINK --> execution successful (protocol)
net start --> execution successful
net use z: \\win2000\share prompts that it cannot be executed, channel blocked.

The system.ini file for DOS networking is as follows:
[network]
sizworkbuf=1498
filesharing=no
printsharing=no
autologon=yes
computername=QAFT
lanroot=a:\NET
username=QAFT
workgroup=workgroup
reconnect=yes
dospophotkey=N
lmlogon=0
logondomain=workgroup
preferredredir=full
autostart=full
maxconnections=8

[network drivers]
netcard=e100b.dos
transport=ndishlp.sys
devdir=a:\NET
LoadRMDrivers=yes

[Password Lists]


protocol.ini file:
[network.setup]
version=0x3110
netcard=ms$ne2clone,1,MS$NE2CLONE,1
transport=ms$nwlink,MS$NWLINK
transport=ms$ndishlp,MS$NDISHLP
lana0=ms$ne2clone,1,ms$nwlink
lana1=ms$ne2clone,1,ms$ndishlp

[MS$NWLINK]
FRAME=ETHERNET_802.2
DriverName=nwlink$
BINDINGS=MS$NE2CLONE
[MS$NE2CLONE]
IOBASE=0x300
INTERRUPT=3
DriverName=E100B$

[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP

[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=MS$NE2CLONE


The network chip used by the client is Intel 82562, and the loaded E100b.dos driver is used (the client uses diskless DOS).

The client is connected normally with the server in diskless Windows.

Please guide why it cannot connect? Is it related to the diskless DOS environment? ......

Why no one replies......

I don't know how to set the system.ini file for dOS networking. But if you want to network-boot a diskless DOS machine, you can try using TFTP to boot grub4dos, and then use grub4dos to boot a floppy disk image. There are many floppy disk images on the network that support more than 100 types of network cards. Download one and come back, and various machines can boot disklessly into the DOS network. It's too troublesome to configure the files yourself.

1, logondomain=workgroup (same as the server)
2, add IP to lmhosts