"Terminator" One-Click GHOST Backup Restoration and GHOST Partition Formatting - China DOS Union Forum

"Terminator" One-click GHOST Backup and Restore and GHOST Partition Formatting

This is an.IMG image, a multi-purpose version. When burned to a CD, it's a CD version; when written to a USB drive, it's a USB drive version; when set as a hard disk boot item, it's a hard disk version. When the system starts, it automatically judges the drive letter where it's booted, so it can be used in other boot media where the boot drive letter is assigned from A: to Y: (up to Z: is assigned as the virtual memory drive letter), and there's no need to worry about what the boot drive letter is.

It supports NTFS, EXT2FS, EXT3FS, and FAT partitions. All dialog boxes are displayed in the upper left corner of the screen without affecting the view. It has intelligent analysis with default file names. When any operation fails, it can automatically analyze the cause of the failure and prompt in Chinese on the screen (such as illegal path, damaged image, etc.). The built-in functional modules include:

☆. Fully intelligent backup and restore: Not only backs up the C drive. If your system is installed on the D drive, it can automatically find the bootable system partition and display it in the default dialog box for reference.
★. GHOST backup and restore partition: Can handle and browse partitions of any type on up to 8 hard disks for backup (users can distinguish different hard disks and different types of partitions on specified hard disks according to the capacity, model, etc. of the hard disks). By default, when you select the nth hard disk, it defaults to backing up to the last partition of the nth hard disk in the initial dialog box for reference. You can also manually browse to directories on NTFS, LINUX, and hidden FAT partitions as the backup path and restore from there. Any request to back up a partition for an incompatible hard disk or an unpartitioned hard disk will report an error.
☆. GHOST backup and restore hard disk: By default, it's to back up the first hard disk to the last partition of the last hard disk (if your computer has 8 hard disks, it's 8). If the last hard disk is unpartitioned, it defaults to the last partition of the second-to-last hard disk.... You can also manually browse to a directory in a partition of any hard disk as the path. Any request from the second hard disk onwards that doesn't meet the requirements will report an error, because at least two hard disks are needed for this kind of thing.
★. Partition clone: When there are n hard disks, by default, what's displayed in the dialog box is to clone the first partition of the first hard disk to the first partition of the nth hard disk. If the nth hard disk is unpartitioned, it will give a prompt whether to continue the operation; otherwise, after cloning, the nth hard disk becomes a primary partition.
☆. Hard disk clone: There's nothing much to say, at least two hard disks are needed.
★. GHOST formatting: Can format the mth partition of the nth hard disk into four partition formats: NTFS, FAT32, EXT2FS, EXT3FS, etc. (An error will be reported and return when an unpartitioned hard disk is selected).
☆. GHOST hard disk partition formatting: Can intelligently divide the nth hard disk into 1 to 12 partitions. It supports lossless partitioning of hard disks with unlimited capacity. The default algorithm shows 15% of the capacity for the first partition and the average value for the rest in the dialog box for reference when adjusting the partition size. By default, all are in FAT32 format. Users can customize the format of each partition to be one of NTFS, FAT32, EXT2FS, or EXT3FS for browsing. It supports dividing partitions by capacity (MB) and percentage (%), and operates fully automatically and intelligently.
★. GHOST custom script: You can write your own custom script and save it to a text file for GHOST to execute.
☆. GHOST hard disk detection: Displays information related to the hard disk.

In addition, there are several additional software, which are also good. For example, AEFDISK that was originally Chinese-ized and GDISK that I Chinese-ized. Its graphical interface script can create more than 60 different format partitions, operate the MBR, and create multiple primary partitions, create 103 partitions......

Note: This one-click GHOST doesn't have network functions. If you want to use multicast network cloning, welcome to use "Terminator" one-click network cloning, which can simultaneously support two standard network cards: packet (a total of 22 kinds, this is rare now, my VPC 5.2 driver can't start) and Ndis (mainstream) for users to choose. It can automatically analyze the network card type and load it intelligently, activate all the gray buttons in GHOST, and also activate the LPT button in the gray buttons to operate the print port. Users can also add.DOS network cards, and the program will automatically generate a new list.

It's really a pity. This.IMG image is too large. I transferred it several times but finally couldn't upload it.
The.IMG image is 3.71 MB, and after compression, it's 3.56 MB. This can't be blamed on me. GHOST.EXE itself is a tough nut to crack. The volume doesn't decrease much after compression. Can Yulu help?
Those who need it can download it from floor 9 or floor 4.

[ Last edited by xiaoyunwang on 2008-10-14 at 18:06 ]

Floor1　xiaoyunwang	Posted 2008-10-03 21:05
高级用户　Posts 374　Credits 940　From 湖南张家界
"Terminator" One-click GHOST Backup and Restore and GHOST Partition Formatting This is an.IMG image, a multi-purpose version. When burned to a CD, it's a CD version; when written to a USB drive, it's a USB drive version; when set as a hard disk boot item, it's a hard disk version. When the system starts, it automatically judges the drive letter where it's booted, so it can be used in other boot media where the boot drive letter is assigned from A: to Y: (up to Z: is assigned as the virtual memory drive letter), and there's no need to worry about what the boot drive letter is. It supports NTFS, EXT2FS, EXT3FS, and FAT partitions. All dialog boxes are displayed in the upper left corner of the screen without affecting the view. It has intelligent analysis with default file names. When any operation fails, it can automatically analyze the cause of the failure and prompt in Chinese on the screen (such as illegal path, damaged image, etc.). The built-in functional modules include: ☆. Fully intelligent backup and restore: Not only backs up the C drive. If your system is installed on the D drive, it can automatically find the bootable system partition and display it in the default dialog box for reference. ★. GHOST backup and restore partition: Can handle and browse partitions of any type on up to 8 hard disks for backup (users can distinguish different hard disks and different types of partitions on specified hard disks according to the capacity, model, etc. of the hard disks). By default, when you select the nth hard disk, it defaults to backing up to the last partition of the nth hard disk in the initial dialog box for reference. You can also manually browse to directories on NTFS, LINUX, and hidden FAT partitions as the backup path and restore from there. Any request to back up a partition for an incompatible hard disk or an unpartitioned hard disk will report an error. ☆. GHOST backup and restore hard disk: By default, it's to back up the first hard disk to the last partition of the last hard disk (if your computer has 8 hard disks, it's 8). If the last hard disk is unpartitioned, it defaults to the last partition of the second-to-last hard disk.... You can also manually browse to a directory in a partition of any hard disk as the path. Any request from the second hard disk onwards that doesn't meet the requirements will report an error, because at least two hard disks are needed for this kind of thing. ★. Partition clone: When there are n hard disks, by default, what's displayed in the dialog box is to clone the first partition of the first hard disk to the first partition of the nth hard disk. If the nth hard disk is unpartitioned, it will give a prompt whether to continue the operation; otherwise, after cloning, the nth hard disk becomes a primary partition. ☆. Hard disk clone: There's nothing much to say, at least two hard disks are needed. ★. GHOST formatting: Can format the mth partition of the nth hard disk into four partition formats: NTFS, FAT32, EXT2FS, EXT3FS, etc. (An error will be reported and return when an unpartitioned hard disk is selected). ☆. GHOST hard disk partition formatting: Can intelligently divide the nth hard disk into 1 to 12 partitions. It supports lossless partitioning of hard disks with unlimited capacity. The default algorithm shows 15% of the capacity for the first partition and the average value for the rest in the dialog box for reference when adjusting the partition size. By default, all are in FAT32 format. Users can customize the format of each partition to be one of NTFS, FAT32, EXT2FS, or EXT3FS for browsing. It supports dividing partitions by capacity (MB) and percentage (%), and operates fully automatically and intelligently. ★. GHOST custom script: You can write your own custom script and save it to a text file for GHOST to execute. ☆. GHOST hard disk detection: Displays information related to the hard disk. In addition, there are several additional software, which are also good. For example, AEFDISK that was originally Chinese-ized and GDISK that I Chinese-ized. Its graphical interface script can create more than 60 different format partitions, operate the MBR, and create multiple primary partitions, create 103 partitions...... Note: This one-click GHOST doesn't have network functions. If you want to use multicast network cloning, welcome to use "Terminator" one-click network cloning, which can simultaneously support two standard network cards: packet (a total of 22 kinds, this is rare now, my VPC 5.2 driver can't start) and Ndis (mainstream) for users to choose. It can automatically analyze the network card type and load it intelligently, activate all the gray buttons in GHOST, and also activate the LPT button in the gray buttons to operate the print port. Users can also add.DOS network cards, and the program will automatically generate a new list. It's really a pity. This.IMG image is too large. I transferred it several times but finally couldn't upload it. The.IMG image is 3.71 MB, and after compression, it's 3.56 MB. This can't be blamed on me. GHOST.EXE itself is a tough nut to crack. The volume doesn't decrease much after compression. Can Yulu help? Those who need it can download it from floor 9 or floor 4. [ Last edited by xiaoyunwang on 2008-10-14 at 18:06 ]

Floor2　wang6610	Posted 2008-10-05 14:26
银牌会员　Posts 488　Credits 1,246
Didn't receive the email.

Floor3　xiaoyunwang	Posted 2008-10-05 16:50
高级用户　Posts 374　Credits 940　From 湖南张家界
Originally posted by wang6610 at 2008-10-5 02:26 PM: Didn't receive the email. The email has been resent successfully. Please help spread it when you have time.

Floor4　wang6610	Posted 2008-10-05 21:45
银牌会员　Posts 488　Credits 1,246
http://www.rayfile.com/files/5fd73a99-92e1-11dd-bbfe-0019d11a795f/ password：wangdoss

Floor5　xiaoyunwang	Posted 2008-10-05 22:51
高级用户　Posts 374　Credits 940　From 湖南张家界
Originally posted by wang6610 at 2008-10-5 09:45 PM: http://www.rayfile.com/files/5fd73a99-92e1-11dd-bbfe-0019d11a795f/ password：wangdoss Thank you for your enthusiastic help, the response was quite timely. Thanks for the upload, thank you!

Floor6　keta	Posted 2008-10-13 13:01
新手上路　Posts 3　Credits 6
Lots of functions, nice

Floor7　xiaoyunwang	Posted 2008-10-14 11:53
高级用户　Posts 374　Credits 940　From 湖南张家界
If further modified, using the original VT display technology, it can be made to display Chinese prompts and Chinese dialog boxes regardless of whether there is a Chinese character system or not. But the workload is too large, and the situation where CCDOS conflicts with a certain computer is very rare...

Floor8　雨露	Posted 2008-10-14 12:52
管理员　Posts 2,601　Credits 6,215
Large attachments cannot be uploaded. You can send them to my email, and I will help upload them to help.cn-dos.net/

Floor9　雨露	Posted 2008-10-14 13:12
管理员　Posts 2,601　Credits 6,215
http://help.cn-dos.net/soft/QGHOST.zip

Floor10　leexuelin	Posted 2008-10-15 00:18
新手上路　Posts 3　Credits 6
Nice tool, bookmarked first. Thanks lz

Floor11　sparetimeter	Posted 2008-10-18 22:36
新手上路　Posts 7　Credits 11
Thanks for sharing

Floor12　cchessbd	Posted 2009-01-13 18:33
高级用户　Posts 222　Credits 525
My friend's dual-core computer got stuck after loading CCDOS.

Floor13　llrrqq	Posted 2009-01-18 22:14
初级用户　Posts 20　Credits 139
Give it a try! Thanks for providing!

Floor14　xiaoyunwang	Posted 2009-01-31 12:21
高级用户　Posts 374　Credits 940　From 湖南张家界
Originally posted by cchessbd at 2009-1-13 06:33 PM: My friend's dual-core computer got stuck after loading CCDOS. Regarding CCDOS and TW, although CCDOS Chinese character system integrates the compatibility of TW Tianhui Chinese character system and also contains many features that TW does not have, in actual tests, it is found that the compatibility of TW Tianhui Chinese character system is still stronger than that of CCDOS, and TW is relatively more universal. Once, a software got stuck when running in CCDOS but ran normally in TW. It is suggested that the owner replace CCDOS with TW and see how it goes?