NTFSDOS: Read contents of NTFS partitions under DOS - China DOS Union Forum

Sender: galeson (A Night of Wind and Rain in the Small Tower), Board: DOS
Subject: Re: How to Boot from Drive A?
Posted: BBS Tsinghua Station (Wed Apr 16 01:16:51 2003), Cross-posted

There is a software called NTFSDOS that can read the contents of NTFS partitions under DOS
But now only the free read-only version is available
The full version can read and write
No free crack has been found yet

【From: SnowGround (Snowy Field)】
: Brother, don't be like this.
: But you are really naive. Hehe.
: Find a bootable antivirus CD.
: First set it in CMOS to boot from drive A.
: Set First Boot Device to Floppy
: For older machines, set Boot Order to A,C
: But if you are using an NTFS partition, hehehe
: Pray to God.

--

※ Source:·BBS Tsinghua Station smth.org·

(Copied using S-Term article copy script)
==================================================

Sender: galeson (A Night of Wind and Rain in the Small Tower), Forum: DOS
Subject: Re: Is there a command to operate NTFS files under DOS?
Posted: BBS Tsinghua Station (Sat Apr 19 13:23:02 2003), internal network

There is a read-write version of ntfsdos
Download at http://www.cn-dos.net/newdos/dosdownload.html

【In reply to lyontang (Caring About You)】
: ntfsdos is just for viewing NTFS files, right?
: Is there a command that can delete or create NTFS file format?

--

※ Source:·BBS Tsinghua Station smth.org·

(Copied using S-Term article copy script)
==================================================
KO's words:
Suddenly saw the http://www.cn-dos.net/newdos/ this website on Tsinghua BBS, so familiar!

Then we would be super super users, heh heh

Woo
I can't open it.

It's 3.12. Is there 4.03?

The following is the speech of ko20010214 on 2003-6-1 14:06:12:
Sender: galeson (A night of wind and rain in the small building), Message area: DOS
Subject: Re: Is there a command to operate NTFS files under DOS
Posted: BBS Tsinghua Station (Sat Apr 19 13:23:02 2003), within the station

There is a read-write version of ntfsdosy
It can be downloaded at http://www.cn-dos.net/newdos/dosdownload.html

My E drive in the virtual machine is in NTFS format. Why can't NTFSPRO drive this partition?
I don't know where the problem is. After executing NTFSPRO, the following is prompted:
-------------------------------------------------------------------------------------
C:\NTFS>ntfspro

NTFSDOS Professional Edition
NTFS File System Driver for DOS, v3.12
Copyright (C) 1999-2000 Winternals Software LP
http://www.winternals.com

You have specified your time zone as GMT+00:00.
GMT time is 2003/6/2 01:35
Local time is 2003/6/2 01:35

Warning: Mounting a Windows NT 4.0 volume (v1.2)
using drivers from Windows 2000 is not permitted.
No NTFS drives mounted - exiting
-----------------------------------------------------------------------------------------
The read-only version NTFSDOS3.02R can drive the NTFS partition
-----------------------------------------------------------------------------------------
C:\NTFS>\ntfsdos

NTFS File System Driver for DOS/Windows V3.02R (read-only)
Copyright (C) 1996-2001 Mark Russinovich and Bryce Cogswell
Sysinternals - www.sysinternals.com

Initialized 64KB of conventional cache.

Mounting NTFS partition(0x81:3) as drive: E

--------------------------------------------------------------------------------------------
Is it the problem of that version?

Alas, it can be seen that NTFSDOS is smaller than NTFSPro and has better compatibility. Because NTFSDOS only needs one file, NTFSDOS.EXE; while NTFSPro needs multiple files such as NTOSKRNL.EXE and NTDETECT.COM in WinNT/2K/XP. Moreover, the files of different WinNT versions are incompatible. So, the files like NTOSKRNL.EXE from Win2K cannot make NTFSPro recognize the NTFS format of WinNT4.0.

So that's how it is!

After downloading ntfsdos and extracting it, there are:
C_1252.nls
C_437.nls
L_INTL.nls
NTDLL.DLL
NTFS.SYS
AUTOCHK.exe
NTFSPRO.exe
NTOSKRNL.exe

There are 8 files, totaling 3.27M, which is obviously not enough to fit completely on a floppy disk. I estimate that only a few of these files are needed, for example: AUTOCHK.exe may not be needed. Is that right?

Yeah, it can still be compressed a bit.

Floor1　ko20010214	Posted 2003-06-01 00:00
版主　Posts 1,628　Credits 7,296
Sender: galeson (A Night of Wind and Rain in the Small Tower), Board: DOS Subject: Re: How to Boot from Drive A? Posted: BBS Tsinghua Station (Wed Apr 16 01:16:51 2003), Cross-posted There is a software called NTFSDOS that can read the contents of NTFS partitions under DOS But now only the free read-only version is available The full version can read and write No free crack has been found yet 【From: SnowGround (Snowy Field)】 : Brother, don't be like this. : But you are really naive. Hehe. : Find a bootable antivirus CD. : First set it in CMOS to boot from drive A. : Set First Boot Device to Floppy : For older machines, set Boot Order to A,C : But if you are using an NTFS partition, hehehe : Pray to God. -- ※ Source:·BBS Tsinghua Station smth.org· (Copied using S-Term article copy script) ==================================================

Floor2　ko20010214	Posted 2003-06-01 00:00
版主　Posts 1,628　Credits 7,296
Sender: galeson (A Night of Wind and Rain in the Small Tower), Forum: DOS Subject: Re: Is there a command to operate NTFS files under DOS? Posted: BBS Tsinghua Station (Sat Apr 19 13:23:02 2003), internal network There is a read-write version of ntfsdos Download at http://www.cn-dos.net/newdos/dosdownload.html 【In reply to lyontang (Caring About You)】 : ntfsdos is just for viewing NTFS files, right? : Is there a command that can delete or create NTFS file format? -- ※ Source:·BBS Tsinghua Station smth.org· (Copied using S-Term article copy script) ================================================== KO's words: Suddenly saw the http://www.cn-dos.net/newdos/ this website on Tsinghua BBS, so familiar!

Floor3　荆棘鸟	Posted 2003-06-01 00:00
高级用户　Posts 144　Credits 537　From 河南
Then we would be super super users, heh heh

Floor4　荆棘鸟	Posted 2003-06-01 00:00
高级用户　Posts 144　Credits 537　From 河南
Woo I can't open it.

Floor5　dydy	Posted 2003-06-01 00:00
初级用户　Posts 4　Credits 109
It's 3.12. Is there 4.03?

Floor6　Lydong	Posted 2003-06-02 00:00
元老会员　Posts 407　Credits 1,468　From 广州
*The following is the speech of ko20010214 on 2003-6-1 14:06:12:* Sender: galeson (A night of wind and rain in the small building), Message area: DOS Subject: Re: Is there a command to operate NTFS files under DOS Posted: BBS Tsinghua Station (Sat Apr 19 13:23:02 2003), within the station There is a read-write version of ntfsdosy It can be downloaded at http://www.cn-dos.net/newdos/dosdownload.html My E drive in the virtual machine is in NTFS format. Why can't NTFSPRO drive this partition? I don't know where the problem is. After executing NTFSPRO, the following is prompted: ------------------------------------------------------------------------------------- C:\NTFS>ntfspro NTFSDOS Professional Edition NTFS File System Driver for DOS, v3.12 Copyright (C) 1999-2000 Winternals Software LP http://www.winternals.com You have specified your time zone as GMT+00:00. GMT time is 2003/6/2 01:35 Local time is 2003/6/2 01:35 Warning: Mounting a Windows NT 4.0 volume (v1.2) using drivers from Windows 2000 is not permitted. No NTFS drives mounted - exiting ----------------------------------------------------------------------------------------- The read-only version NTFSDOS3.02R can drive the NTFS partition ----------------------------------------------------------------------------------------- C:\NTFS>\ntfsdos NTFS File System Driver for DOS/Windows V3.02R (read-only) Copyright (C) 1996-2001 Mark Russinovich and Bryce Cogswell Sysinternals - www.sysinternals.com Initialized 64KB of conventional cache. Mounting NTFS partition(0x81:3) as drive: E -------------------------------------------------------------------------------------------- Is it the problem of that version?

Floor7　Wengier	Posted 2003-06-02 00:00
系统支持　Posts 10,521　Credits 27,736
Alas, it can be seen that NTFSDOS is smaller than NTFSPro and has better compatibility. Because NTFSDOS only needs one file, NTFSDOS.EXE; while NTFSPro needs multiple files such as NTOSKRNL.EXE and NTDETECT.COM in WinNT/2K/XP. Moreover, the files of different WinNT versions are incompatible. So, the files like NTOSKRNL.EXE from Win2K cannot make NTFSPro recognize the NTFS format of WinNT4.0.

Floor8　Lydong	Posted 2003-06-02 00:00
元老会员　Posts 407　Credits 1,468　From 广州
So that's how it is!

Floor9　xbt1	Posted 2003-06-03 00:00
初级用户　Posts 1　Credits 102
After downloading ntfsdos and extracting it, there are: C_1252.nls C_437.nls L_INTL.nls NTDLL.DLL NTFS.SYS AUTOCHK.exe NTFSPRO.exe NTOSKRNL.exe There are 8 files, totaling 3.27M, which is obviously not enough to fit completely on a floppy disk. I estimate that only a few of these files are needed, for example: AUTOCHK.exe may not be needed. Is that right?

Floor10　如是大师	Posted 2003-06-03 00:00
元老会员　Posts 3,351　Credits 9,654　From 湖北
Yeah, it can still be compressed a bit.