VTGBK v2.00--GBK code & 110 characters (+FNT.COM=220 characters) - China DOS Union Forum

VTGBK v2.00--GBK Code & 110 Characters (+FNT.COM=220 Characters)

VTGBK.com V2.00 is a new member of the VTmagic.com series. It ① supports GBK code simplified and traditional character shapes, facilitating source text editing under the window; ② allows a maximum of 110 non - repeating Chinese characters to be displayed on the same screen, with a larger capacity; ③ the error cause of some CRT/LCD monitors should be insufficient bandwidth (such as the resolution of only 640x400 causing the non - existence of the 9th column), and it cannot support the 8-column/9-column setting of Western characters. So, considering the hardware compatibility of the universal boot disk, VTGBK generates the.EXE version without setting the column width by default (if you want the Chinese character shape display to be perfect, use VTGBK/xxx to generate the seamless version (with; set to be with seams)); ④ this version no longer has many parameters like the VTmagic.com 5.10 version, and it is simple and easy to use. ⑤ Thoughtful design: if the source text is too large (exceeding 110 non - repeating Chinese characters), although VTGBK reports an error showing the 111th Chinese character shape, it still generates the.NEW (truncated)/.EXE file to facilitate checking the specific location. ⑥ Adds seam type and character set number setting. ⑦ Adds the VT font file toolbox, allowing up to 220 Chinese characters to be displayed on the same screen for dual character sets! ! !

Note:
Since more than 64 Chinese characters may be displayed, the usual basic Western characters may be displayed in a messy way. At this time, as long as you type the specific xxx.EXE f at the DOS command line, the normal Western display can be restored.
It is suggested that no more than 64 Chinese characters be set in CONFIG.SYS!

VTmagicGBK.com helps non-Chinese character systems display 110 Chinese characters!
VGA_Text magic only she can do it (GBK version) generates "font.EXE & text.NEW" V2.00 (C)2007.4.19
Design: Luo MingAn Luo Mingan (also known as: Born2be Ben Shi)

===Brief Tutorial===
VTGBK textfile.TXT<Enter> -- Generate.NEW/.EXE
textfile.EXE<Enter> -- Load new font
TYPE textfile.NEW<Enter> -- Browse.NEW new code text
EDIT textfile.NEW<Enter> -- Edit.NEW new code text
textfile.EXE any parameter<Enter> -- Restore original system font

===More Information=== Use FNT.COM to unleash the potential of VT font!
VTGBK textfile
^^0--7=character set 0--7(default 0) 8,9=seamless, with seams(default no setting 8/9)
Generate textfile.NEW & textfile.EXE (need C:\ or.\GBK16 or HZK16).
(To generate Chinese font library GBK16x/HZK16x, use software such as VTEDIT.EXE or TS?.EXE.)
(The new internal code order of NEW is like DF,FF;...;D0,F0;CF,EF;...;C0,E0;BF,BE,...,25,24.)

Run.EXE in DOS or load it in CONFIG.SYS in the form of DEVICE=textfile.EXE,.NEW can make the DOS system boot menu, DOS editor display Chinese characters.
(To make a Chinese character DOS system boot menu, need CONFIGP.MNU/CONMENU.SYS/BOOT.SYS.)

The dot matrix character set of EGA/VGA is stored in bit plane 2 (i.e., display RAM) of the display card. Users can modify the dot matrix character set information through the interface provided by EGA/VGA to load and use the character shapes they like. If a Chinese character is split into two characters and replaced respectively, Chinese characters can be displayed without a Chinese character system.

2007.4.19 V2.00 Modify the new internal code format, command line seam type and character set # setting, add FNT.COM toolbox, and fully unleash the potential of dual character sets to display 220 Chinese characters on the same screen

2007.4.14 V1.10 Correct the chaotic error reporting BUG of Chinese font library processing

2007.4.12 V1.00 Support GBK code Chinese font library, up to 110 non - repeating Chinese characters

[ Last edited by Ben Shi on 2007-4-20 at 06:32 AM ]

Floor1　本是	Posted 2007-04-14 04:21
银牌会员　Posts 790　Credits 2,227
VTGBK v2.00--GBK Code & 110 Characters (+FNT.COM=220 Characters) VTGBK.com V2.00 is a new member of the VTmagic.com series. It ① supports GBK code simplified and traditional character shapes, facilitating source text editing under the window; ② allows a maximum of 110 non - repeating Chinese characters to be displayed on the same screen, with a larger capacity; ③ the error cause of some CRT/LCD monitors should be insufficient bandwidth (such as the resolution of only 640x400 causing the non - existence of the 9th column), and it cannot support the 8-column/9-column setting of Western characters. So, considering the hardware compatibility of the universal boot disk, VTGBK generates the.EXE version without setting the column width by default (if you want the Chinese character shape display to be perfect, use VTGBK/xxx to generate the seamless version (with; set to be with seams)); ④ this version no longer has many parameters like the VTmagic.com 5.10 version, and it is simple and easy to use. ⑤ Thoughtful design: if the source text is too large (exceeding 110 non - repeating Chinese characters), although VTGBK reports an error showing the 111th Chinese character shape, it still generates the.NEW (truncated)/.EXE file to facilitate checking the specific location. ⑥ Adds seam type and character set number setting. ⑦ Adds the VT font file toolbox, allowing up to 220 Chinese characters to be displayed on the same screen for dual character sets! ! ! Note: Since more than 64 Chinese characters may be displayed, the usual basic Western characters may be displayed in a messy way. At this time, as long as you type the specific xxx.EXE f at the DOS command line, the normal Western display can be restored. It is suggested that no more than 64 Chinese characters be set in CONFIG.SYS! VTmagicGBK.com helps non-Chinese character systems display 110 Chinese characters! VGA_Text magic only she can do it (GBK version) generates "font.EXE & text.NEW" V2.00 (C)2007.4.19 Design: Luo MingAn Luo Mingan (also known as: Born2be Ben Shi) ===Brief Tutorial=== VTGBK textfile.TXT<Enter> -- Generate.NEW/.EXE textfile.EXE<Enter> -- Load new font TYPE textfile.NEW<Enter> -- Browse.NEW new code text EDIT textfile.NEW<Enter> -- Edit.NEW new code text textfile.EXE any parameter<Enter> -- Restore original system font ===More Information=== Use FNT.COM to unleash the potential of VT font! VTGBK textfile ^^0--7=character set 0--7(default 0) 8,9=seamless, with seams(default no setting 8/9) Generate textfile.NEW & textfile.EXE (need C:\ or.\GBK16 or HZK16). (To generate Chinese font library GBK16x/HZK16x, use software such as VTEDIT.EXE or TS?.EXE.) (The new internal code order of NEW is like DF,FF;...;D0,F0;CF,EF;...;C0,E0;BF,BE,...,25,24.) Run.EXE in DOS or load it in CONFIG.SYS in the form of DEVICE=textfile.EXE,.NEW can make the DOS system boot menu, DOS editor display Chinese characters. (To make a Chinese character DOS system boot menu, need CONFIGP.MNU/CONMENU.SYS/BOOT.SYS.) The dot matrix character set of EGA/VGA is stored in bit plane 2 (i.e., display RAM) of the display card. Users can modify the dot matrix character set information through the interface provided by EGA/VGA to load and use the character shapes they like. If a Chinese character is split into two characters and replaced respectively, Chinese characters can be displayed without a Chinese character system. 2007.4.19 V2.00 Modify the new internal code format, command line seam type and character set # setting, add FNT.COM toolbox, and fully unleash the potential of dual character sets to display 220 Chinese characters on the same screen 2007.4.14 V1.10 Correct the chaotic error reporting BUG of Chinese font library processing 2007.4.12 V1.00 Support GBK code Chinese font library, up to 110 non - repeating Chinese characters [ Last edited by Ben Shi on 2007-4-20 at 06:32 AM ] Attachments Demo.rar (7.58 KiB) Vtgbk.rar (3.56 KiB) Vtfnt.rar (3.48 KiB)

Floor2　本是	Posted 2007-04-14 04:23
银牌会员　Posts 790　Credits 2,227
Related links: HZK16x see "Celebrate New Year: Present HZK16 in Different Font Styles!" Floor 1 (http://www.cn-dos.net/forum/viewthread.php?tid=18934&fpage=0&highlight=&page=1): http://www.cn-dos.net/forum/attachment.php?aid=895&checkid=42848&download=1 http://www.cn-dos.net/forum/attachment.php?aid=896&checkid=b5b6b&download=1 GBK16x see "Celebrate New Year: Present HZK16 in Different Font Styles!" Floor 48 (http://www.cn-dos.net/forum/viewthread.php?tid=18934&fpage=0&highlight=&page=4): http://www.cn-dos.net/forum/attachment.php?aid=3283&checkid=1ded7&download=1 http://www.cn-dos.net/forum/attachment.php?aid=3284&checkid=1ded7&download=1 http://www.cn-dos.net/forum/attachment.php?aid=3285&checkid=1ded7&download=1 http://www.cn-dos.net/forum/attachment.php?aid=3286&checkid=1ded7&download=1 http://www.cn-dos.net/forum/attachment.php?aid=3287&checkid=1ded7&download=1 http://www.cn-dos.net/forum/attachment.php?aid=3288&checkid=afd32&download=1 [ Last edited by 本是 on 2007-4-14 at 01:38 PM ]

Floor3　wangjf	Posted 2007-04-14 04:46
中级用户　Posts 63　Credits 254
Follow the new work of the poster.

Floor4　wang6610	Posted 2007-04-14 05:33
银牌会员　Posts 488　Credits 1,246
Congratulations!

Floor5　download	Posted 2007-04-14 06:24
初级用户　Posts 101　Credits 199
Virgin, come and take a look...

Floor6　wang6610	Posted 2007-04-14 06:25
银牌会员　Posts 488　Credits 1,246
The day before yesterday was a virgin, and today is still a virgin?

Floor7　download	Posted 2007-04-14 06:28
初级用户　Posts 101　Credits 199
Who can make a BAT and EXE file with the largest Chinese characters to take a look? I'm relatively lazy... It's best to have a packaged download. Hehe

Floor8　cchessbd	Posted 2007-04-14 08:22
高级用户　Posts 222　Credits 525
Can't download after logging in!!! shit!!!!!

Floor9　q8q8feng	Posted 2007-04-14 09:23
初级用户　Posts 28　Credits 56
It can be downloaded. I just downloaded it just now. Hehe, thank you, the thread starter. You've worked hard. The virgin is also here.

Floor10　本是	Posted 2007-04-14 11:02
银牌会员　Posts 790　Credits 2,227
Originally posted by download at 2007-4-14 06:28: Who can make a BAT and EXE file with the largest number of Chinese characters to take a look? I'm relatively lazy... It would be best to have a packaged download. Hehe Any random text will do. It's not a problem if there are more than 110 non - repeating Chinese characters. VTGBK can always correctly judge and control the.NEW length in a timely manner. Run xxx.EXE, and then type xxx.EXE, and you can clearly see the situation of exceeding the limit. To cater to your habits, I found a few texts (The hardware foundation of VT technology (exactly 64 Chinese characters) and the first section of the program of this union (more than 110 Chinese characters)) and saved them as files, and made a DEMO demonstration package, which is placed on the first floor for you to download.

Floor11　315038	Posted 2007-04-14 13:29
新手上路　Posts 1　Credits 2
It can be downloaded. I just downloaded it just now. Hehe, thank you, the landlord. You've worked hard. The virgin is also here.

Floor12　cchessbd	Posted 2007-04-15 07:14
高级用户　Posts 222　Credits 525
VTGBK can't run, always prompting that it can't find c:\hzk16. Copying to c:\ doesn't work either. Using UE to check, there is the word GBK16, and then copying hzk16 as GBK16, it's still the same prompt. VTMAGIC displays normally.

Floor13　jyssysz	Posted 2007-04-15 09:59
中级用户　Posts 50　Credits 343
Collected, really good stuff.

Floor14　本是	Posted 2007-04-15 11:32
银牌会员　Posts 790　Credits 2,227
Originally posted by cchessbd at 2007-4-15 07:14: VTGBK can't run, always prompting that it can't find c:\hzk16 Copying to c:\ doesn't work either. Using UE to check, there is the word GBK16, and then copying hzk16 as GBK16, still the same prompt. VTMAGIC is displayed normally. Thanks for testing! The bug has been cleared. Please re-download the top VTGBK.RAR.

Floor15　download	Posted 2007-04-17 01:17
初级用户　Posts 101　Credits 199
Ask, does it support LCD?