Open Attachment
The above link is a simulation program of FDISK. FDISK is a hard disk partitioning management program built into DOS, used to divide the hard disk into multiple partitions, create logical drives, activate disks, etc.
Since FDISK is in English and its powerful functions make it somewhat dangerous. So someone wrote a simulation program of FDISK. Its interface is the same as FDISK, but it will not actually modify the hard disk, so it is very safe and suitable for beginners to learn. Wait until you are ready to use the real FDISK.
Attachment: Detailed Explanation of Unpublished Parameters of FDISK
/STATUS
Parameter function: Display partition status
Parameter details: When there are no logical disks in the extended partition, the extended partition will not be displayed
/MBR
Parameter function: Rebuild the master boot record (Master Boot Record) of the first hard disk
Parameter details: When a virus infects the MBR, it is quite useful to clear the virus
/PRI
Parameter function: Create a primary partition and set it as active
Parameter details: Create a primary partition of a certain size on the hard disk. The partition will be set as an active partition
/PRIO
Parameter function: Create a primary partition using FAT16 and set it as active
/EXT
Parameter function: Create an extended partition
Parameter details: Create an extended partition of a certain size on the hard disk (used to create logical drives)
/LOG
Parameter function: Create a logical drive
Parameter details: Use /LOG to create a logical drive of a certain size. /LOG must be used with /EXT
/LOGO
Parameter function: Create a logical drive using FAT16
/FPRMT
Parameter function: Ask about the use of FAT16/FAT32 in the interactive mode
Parameter details: When the /FPRMT parameter is added, the initial large hard disk support inquiry screen will not appear, but it will ask whether to use FAT16 or FAT32 when creating a new partition each time
/Q
Parameter function: Do not reactivate the computer when ending FDISK
Parameter details: Using the /Q parameter will not reactivate the computer after changing the partition table
/X
Parameter function: Do not use LBA attribute
Parameter details: Using the /X parameter will not create a partition with LBA attribute
/ACTOK
Parameter function: Do not check the health of the hard disk
Parameter details: Using the /ACTOK parameter can speed up the partitioning action without checking the health of the hard disk
/CMBR
Parameter function: Rebuild the master boot record of the specified hard disk
Parameter details: The action is the same as /MBR, but the hard disk can be specified
The above link is a simulation program of FDISK. FDISK is a hard disk partitioning management program built into DOS, used to divide the hard disk into multiple partitions, create logical drives, activate disks, etc.
Since FDISK is in English and its powerful functions make it somewhat dangerous. So someone wrote a simulation program of FDISK. Its interface is the same as FDISK, but it will not actually modify the hard disk, so it is very safe and suitable for beginners to learn. Wait until you are ready to use the real FDISK.
Attachment: Detailed Explanation of Unpublished Parameters of FDISK
/STATUS
Parameter function: Display partition status
Parameter details: When there are no logical disks in the extended partition, the extended partition will not be displayed
/MBR
Parameter function: Rebuild the master boot record (Master Boot Record) of the first hard disk
Parameter details: When a virus infects the MBR, it is quite useful to clear the virus
/PRI
Parameter function: Create a primary partition and set it as active
Parameter details: Create a primary partition of a certain size on the hard disk. The partition will be set as an active partition
/PRIO
Parameter function: Create a primary partition using FAT16 and set it as active
/EXT
Parameter function: Create an extended partition
Parameter details: Create an extended partition of a certain size on the hard disk (used to create logical drives)
/LOG
Parameter function: Create a logical drive
Parameter details: Use /LOG to create a logical drive of a certain size. /LOG must be used with /EXT
/LOGO
Parameter function: Create a logical drive using FAT16
/FPRMT
Parameter function: Ask about the use of FAT16/FAT32 in the interactive mode
Parameter details: When the /FPRMT parameter is added, the initial large hard disk support inquiry screen will not appear, but it will ask whether to use FAT16 or FAT32 when creating a new partition each time
/Q
Parameter function: Do not reactivate the computer when ending FDISK
Parameter details: Using the /Q parameter will not reactivate the computer after changing the partition table
/X
Parameter function: Do not use LBA attribute
Parameter details: Using the /X parameter will not create a partition with LBA attribute
/ACTOK
Parameter function: Do not check the health of the hard disk
Parameter details: Using the /ACTOK parameter can speed up the partitioning action without checking the health of the hard disk
/CMBR
Parameter function: Rebuild the master boot record of the specified hard disk
Parameter details: The action is the same as /MBR, but the hard disk can be specified
我的网志
http://hzmys.blog.163.com/
我的网盘
firststep.qjwm.com
fsmys.ys168.com
ssmys.ys168.com
www.brsbox.com/fsmys
www.brsbox.com/ssmys
www.brsbox.com/ccdos
http://hzmys.blog.163.com/
我的网盘
firststep.qjwm.com
fsmys.ys168.com
ssmys.ys168.com
www.brsbox.com/fsmys
www.brsbox.com/ssmys
www.brsbox.com/ccdos