China DOS Union

Want to make an IMG file for GHOST.8.3 automatic restoration! Can boot the computer. What files are at least needed. Automatically restore the GHO file in the root directory of the CD, such as back.gho. I know these are needed, but I don't know what else is needed.
autoexec.bat
config.sys
io.sys
vide-cdd.sys
ghost.exe
command.com
What else?
And how should AUTOEXEX.BAT and CONGIG.SYS be written? To be the most concise.

My machine:

config.sys

device=himem.sys /testmem:off
DEVICEHIGH=VIDE-CDD.SYS /D:IDE-CD


autoexec.bat

rem Specify the CD drive as Q
SHCDX33A /D:IDE-CD /l:Q
Ghost.exe -clone,mode=pload,src=Q:\back.gho:1,dst=1:1 -rb
rem Add -sure after confirming it works, that is, use the following line.
rem Ghost.exe -clone,mode=pload,src=Q:\back.gho:1,dst=1:1 -rb -sure
－－－－－－－－－
In addition to DOS system files, all files used in the two files are needed.

[ Last edited by lianjiang2004 on 2006-10-31 at 11:29 PM ]

Still need MSCDEX.EXE and other drive mapping files for closing the area

autoexec.bat
config.sys
io.sys
vide-cdd.sys
ghost.exe
MSCDEX.EXE
command.comIs these enough? Are there any others?

Originally posted by lianjiang2004 at 2006-10-31 11:21 PM:
My computer:

config.sys

device=himem.sys /testmem:off
DEVICEHIGH=VIDE-CDD.SYS /D:IDE-CD


autoexec.bat

rem Specify the CD drive as Q
SHCDX33A /D:IDE-CD /l:Q
Ghost.exe -clone,mode=pload,src=Q ...

Thank you, friend. What is the SHCDX33A file? I've never seen it before.

shcdx33a.com A compact and practical CD-ROM drive extension driver, the latest version 3.3a, is the best alternative to MSCDEX, occupying very little memory

Originally posted by lianjiang2004 at 2006-11-1 01:16 AM:
The compact and practical CD-ROM drive extension driver version 3.3a is the best alternative to MSCDEX, occupying very little memory

SHCDX33A /D:IDE-CD /l:Q
It should be like this SHCDX33A /D:IDE-CD /L:Q

Just use the code from floor 2.

Originally posted by cc321mn at 2006-11-1 01:22:

SHCDX33A /D:IDE-CD /l:Q
Is this like this SHCDX33A /D:IDE-CD /L:Q

SHCDX33A /D:IDE-CD /l:Q is lowercase L. Both uppercase and lowercase are acceptable.

Originally posted by Must Love at 2006-11-1 01:50 AM:
Just use the code from floor 2.

autoexec.bat
config.sys
io.sys
vide-cdd.sys
ghost.exe
MSCDEX.EXE
command.com Is it okay to just use these? Are there any others?
In the IMG file, is it okay to just use these? Do you need anything else?

config.sys

device=himem.sys /testmem:off
DEVICEHIGH=VIDE-CDD.SYS /D:IDE-CD
Can this line device=himem.sys /testmem:off be deleted here?

Here is a ghost file I modified in.ima format. Can this achieve automatic restoration!
Can't send the file. I'll send a picture.

[ Last edited by cc321mn on 2006-11-1 at 03:06 AM ]

Also, you are still missing himem.sys. Add in the top line of config.sys:
device=himem.sys

As for the GHOST command, you can write it into 1.bat. Remove the GHOST command line in AUTOEXEC.BAT and change the prompt to "Press Enter to start system recovery after entering 1". This is safer.

Also, the forum has limited space, please try not to post files.

[ Last edited by 不得不爱 on 2006-11-1 at 03:24 AM ]

I usually remove the "sure" at the end of the ghost command line. Or add a password during backup, which is more secure.

Originally posted by Must Love at 2006-11-1 03:22 AM:
Also, you are missing himem.sys
Add at the top line in config.sys:
device=himem.sys
As for the GHOST command, you can write it into 1.bat
Remove the ghost command line in AUTOEXEC.BAT and change the prompt to
Press Enter after entering 1 ...

Oh. Thanks.