China DOS Union

-- Unite DOS · Advance DOS · Grow DOS --
Union site: www.cn-dos.net　Forum site: www.cn-dos.net/forum

中国DOS联盟论坛
The time now is 2026-08-13 01:08

47,811 topics / 349,897 posts / today 0 new / 48,256 members

DOS媒体世界 & 网络技术（多媒体室） » Help to see whether it's a wrong network card driver or a wrong parameter configuration of Arachne.

Printable Version 　1,751 / 5

Floor1　ycm0263	Posted 2006-08-27 11:09
初级用户　Posts 18　Credits 48
My network card is 8139. I wrote in config.sys DEVICEHIGH=C:\8139\protman.dos /I:C:\8139 DEVICEHIGH=C:\8139\dis_pkt.dos DEVICEHIGH=C:\8139\rtsnd.dos In autoexec.bat I wrote rtl8139.com 0x60 -m 100full From the step-by-step tracking results, it seems all passed, but after I configured IP, MASK, DNS, gateway in ARACHNE 1.7, I can't connect to any website. But reading local web pages is okay.

Floor2　LanCat	Posted 2006-08-28 03:20
中级用户　Posts 78　Credits 288
I don't know much about ARACHNE. I'm not sure whether it uses NDIS driver or PACKET driver, but I think there's something wrong with your loading of the network card driver. RTSND.DOS is an NDIS driver, and then it converts NDIS to PACKET through DIS_PKT.DOS, so that PACKET is supported. But RTL8139 is a PACKET driver, and you loaded it again. What's the situation here? If ARACHNE uses the PACKET driver, as long as you run RTL8139, you should delete all the commands in CONFIG.

Floor3　ycm0263	Posted 2006-08-28 12:19
初级用户　Posts 18　Credits 48
Originally posted by LanCat at 2006-8-28 03:20: Not very familiar with ARACHNE, not sure if it uses NDIS drivers or PACKET drivers, but I think there's a problem with how you loaded the network card driver. RTSND.DOS is an NDIS driver, and then DIS_PKT.DOS is used to convert NDIS to PACKET .. I also don't know how to configure it. Those 3 commands in config come from GHOST, and that command in autoexec comes from maxdos. I don't know what these commands specifically do. I tried removing those 3 commands in config and only running rtl8139, and the recognized network card MAC was all FF. As soon as I ran ARACHNE, it prompted that there was no driver.

Floor4　LanCat	Posted 2006-08-28 13:30
中级用户　Posts 78　Credits 288
If you confirm that the network card of your machine is 8139, then download the latest driver and try again. Address: ftp://210.51.181.211/cn/nic/rtl8169rtl8169sbrtl8110sbrtl8169sc/ndis2-8169(114).zip The driver is the RtsPkt.exe file in the EXE directory, and the loading command is Rtspkt 0x60

Floor5　ycm0263	Posted 2006-08-28 15:48
初级用户　Posts 18　Credits 48
Originally posted by LanCat at 2006-8-28 13:30: If you confirm that the network card of your machine is 8139, then download the latest driver and try again. Address: ftp://210.51.181.211/cn/nic/rtl8169rtl8169sbrtl8110sbrtl8169sc/ndis2-8169(114).zip It is confirmed to be 8139. The network card property shows "Realtek RTL8139 Family PCI Fast Ethernet NIC". There is no RtsPkt.exe found in that ZIP package.

Floor6　LanCat	Posted 2006-09-14 13:43
中级用户　Posts 78　Credits 288
I'm sorry, it should be the RTSPKT.COM file in the EXE directory of ftp://202.65.194.18/cn/nic/rtl8139abcd8130810xpciseries/rtspkt-8139(344).zip