Where can I find a Chinese GRUB that can be installed on the hard drive? - China DOS Union Forum

I downloaded several times online but couldn't get GRUB that can be installed in the hard disk MBR. It's said that there need to be stage1 and stage2 files, and what other files are there! I just can't get them! Who can help me?

Stop using stage 1 and stage 2. Use bootlace.com + grldr instead.

But I need to install it to the MBR. What should I do?
Can I use bootlace.com + grldr to install the Chinese version of GRUB to the MBR?

This system is indeed quite good. The speed is very fast. But I don't know how to make flexible use of it. I want to use it as a platform for one-click recovery supporting the hidden primary partition. I don't know where to start.

I would like to ask, when is bootlace.com used and how to install the Chinese version of GRUB to the MBR? Thanks in advance!

Bootlace modifies the MBR of the hard disk, adds a segment of code to search for grldr, and then placing grldr in the root directory of any partition allows booting.

How to modify? I don't know. Can you teach me?

Originally posted by qwe1234567 at 2006-5-13 06:55 PM:
How to modify, I don't know, can you teach me?

It will modify automatically, execute the command under DOS,
bootlace 0x80
Then it can be installed to the MBR of the first hard disk.

[ Last edited by fujianabc on 2006-5-13 at 21:00 ]

Thanks. Is it that simple? If I put the GRUB file on drive D, will it be able to find it? What files are needed in the Chinese version and where should they be placed? The files in grub_for_dos-0[1].4.2pre4 are so messy, I don't know where to put those files. Do I need all those files or just some? Please tell me again!

Generally, grldr can be placed in any partition. If there is a problem, put grldr in the root directory of the primary partition. It can be any partition format. For the Chinese version, you need the grldr in the chinese folder and also load the font file.

I put grldr in D:\ and MENU.LST in BOOT\GRUB\ After installing with bootlace 0x80 to the hard disk, after booting, there is only a grub:> What's the matter?

It is suggested that you find some materials about GRUB on the Internet to get to know it first, and then practice.

Your boot directly enters the GRUB command line. This may be because GRUB fails to find the menu.lst file.

This may also be caused by the different case of the menu.lst file name (try changing it to lowercase), or it may be caused by some unknown BUG in GRUB4DOS.

If it doesn't work on drive D, you can also try putting it in the root directory of drive C or other drives. If it doesn't work in the root directory, you can also try putting it in the position of /boot/grub/menu.lst.

If the partition type where GRLDR or menu.lst is placed is NTFS, there may be an error of not finding the file (such a BUG will no longer be regarded as a BUG, because the support for NTFS is not guaranteed, maybe it can be solved in the future, but no one is working on solving this problem at present). You can try to create a FAT32 or FAT16 format partition on the hard drive, put menu.lst in the root directory of it, and it will definitely succeed.

You can now find out whether there is a menu.lst file on your hard drive under the GRUB command line. Look at relevant materials to make use of the powerful GRUB command line function.

But when I install in the MBR with stage1 and stage2 files, there is no problem, but it's in English, and Chinese display is garbled!

The success rate of GRUB automatically finding menu.lst is only half! It's not that GRUB has bugs, it is estimated that during the scanning process, it is related to the hard disk's seek mode! I set my hard disk to LBA and it will be 100% successful!

Originally posted by hnlyzhd at 2006-5-15 13:27:
The success rate of GRUB automatically finding menu.lst is only half!

It's not that GRUB has a bug. It is estimated that it is related to the hard disk's seek mode during scanning!

If I set my hard disk to LBA, it will be 100% successful...

How did you install GRUB?

Floor1　不得不爱	Posted 2006-05-13 09:53
超级版主　Posts 2,044　Credits 5,310　From 四川南充
I downloaded several times online but couldn't get GRUB that can be installed in the hard disk MBR. It's said that there need to be stage1 and stage2 files, and what other files are there! I just can't get them! Who can help me?

Floor2　fujianabc	Posted 2006-05-13 11:34
金牌会员　Posts 1,616　Credits 3,467
Stop using stage 1 and stage 2. Use bootlace.com + grldr instead.

Floor3　不得不爱	Posted 2006-05-13 13:38
超级版主　Posts 2,044　Credits 5,310　From 四川南充
But I need to install it to the MBR. What should I do? Can I use bootlace.com + grldr to install the Chinese version of GRUB to the MBR?

Floor4　zlgs	Posted 2006-05-13 13:42
初级用户　Posts 45　Credits 88
This system is indeed quite good. The speed is very fast. But I don't know how to make flexible use of it. I want to use it as a platform for one-click recovery supporting the hidden primary partition. I don't know where to start.

Floor5　不得不爱	Posted 2006-05-13 14:38
超级版主　Posts 2,044　Credits 5,310　From 四川南充
I would like to ask, when is bootlace.com used and how to install the Chinese version of GRUB to the MBR? Thanks in advance!

Floor6　fujianabc	Posted 2006-05-13 18:26
金牌会员　Posts 1,616　Credits 3,467
Bootlace modifies the MBR of the hard disk, adds a segment of code to search for grldr, and then placing grldr in the root directory of any partition allows booting.

Floor7　不得不爱	Posted 2006-05-13 18:55
超级版主　Posts 2,044　Credits 5,310　From 四川南充
How to modify? I don't know. Can you teach me?

Floor8　fujianabc	Posted 2006-05-13 20:59
金牌会员　Posts 1,616　Credits 3,467
Originally posted by qwe1234567 at 2006-5-13 06:55 PM: How to modify, I don't know, can you teach me? It will modify automatically, execute the command under DOS, bootlace 0x80 Then it can be installed to the MBR of the first hard disk. [ Last edited by fujianabc on 2006-5-13 at 21:00 ]

Floor9　不得不爱	Posted 2006-05-14 10:58
超级版主　Posts 2,044　Credits 5,310　From 四川南充
Thanks. Is it that simple? If I put the GRUB file on drive D, will it be able to find it? What files are needed in the Chinese version and where should they be placed? The files in grub_for_dos-0[1].4.2pre4 are so messy, I don't know where to put those files. Do I need all those files or just some? Please tell me again!

Floor10　fujianabc	Posted 2006-05-14 11:11
金牌会员　Posts 1,616　Credits 3,467
Generally, grldr can be placed in any partition. If there is a problem, put grldr in the root directory of the primary partition. It can be any partition format. For the Chinese version, you need the grldr in the chinese folder and also load the font file.

Floor11　不得不爱	Posted 2006-05-14 16:41
超级版主　Posts 2,044　Credits 5,310　From 四川南充
I put grldr in D:\ and MENU.LST in BOOT\GRUB\ After installing with bootlace 0x80 to the hard disk, after booting, there is only a grub:> What's the matter?

Floor12　tinybit	Posted 2006-05-15 09:22
初级用户　Posts 57　Credits 137
It is suggested that you find some materials about GRUB on the Internet to get to know it first, and then practice. Your boot directly enters the GRUB command line. This may be because GRUB fails to find the menu.lst file. This may also be caused by the different case of the menu.lst file name (try changing it to lowercase), or it may be caused by some unknown BUG in GRUB4DOS. If it doesn't work on drive D, you can also try putting it in the root directory of drive C or other drives. If it doesn't work in the root directory, you can also try putting it in the position of /boot/grub/menu.lst. If the partition type where GRLDR or menu.lst is placed is NTFS, there may be an error of not finding the file (such a BUG will no longer be regarded as a BUG, because the support for NTFS is not guaranteed, maybe it can be solved in the future, but no one is working on solving this problem at present). You can try to create a FAT32 or FAT16 format partition on the hard drive, put menu.lst in the root directory of it, and it will definitely succeed. You can now find out whether there is a menu.lst file on your hard drive under the GRUB command line. Look at relevant materials to make use of the powerful GRUB command line function.

Floor13　不得不爱	Posted 2006-05-15 11:33
超级版主　Posts 2,044　Credits 5,310　From 四川南充
But when I install in the MBR with stage1 and stage2 files, there is no problem, but it's in English, and Chinese display is garbled!

Floor14　hnlyzhd	Posted 2006-05-15 13:27
高级用户　Posts 164　Credits 544
The success rate of GRUB automatically finding menu.lst is only half! It's not that GRUB has bugs, it is estimated that during the scanning process, it is related to the hard disk's seek mode! I set my hard disk to LBA and it will be 100% successful!

Floor15　不得不爱	Posted 2006-05-15 15:07
超级版主　Posts 2,044　Credits 5,310　From 四川南充
Originally posted by hnlyzhd at 2006-5-15 13:27: The success rate of GRUB automatically finding menu.lst is only half! It's not that GRUB has a bug. It is estimated that it is related to the hard disk's seek mode during scanning! If I set my hard disk to LBA, it will be 100% successful... How did you install GRUB?