A bootable disk made with Ghost 8.2 Enterprise Edition - China DOS Union Forum

The original file content:

autoexec.bat
@echo off
prompt $p$g
\net\netbind.com
MOUSE.COM
echo Loading...
\ghost\ghost.exe

config.sys
DEVICE=\net\protman.dos /I:\net
DEVICE=\net\dis_pkt.dos
DEVICE=\net\e100b.dos

If you want to add other network card drivers, in autoexec.bat, after \net\netbind.com, you can add commands to load other network card drivers in sequence. For example, if there is another network card driver file like xxxx.com, you can add \net\xxxx.com. In config.sys, after DEVICE=\net\dis_pkt.dos, you can add DEVICE=\net\other_nic_driver.dos (replace other_nic_driver.dos with the actual file name of the other network card driver). But you need to make sure that the network card drivers are compatible and properly configured.

Translation:

autoexec.bat
@echo off
prompt $p$g
\net\netbind.com
MOUSE.COM
echo Loading...
\ghost\ghost.exe

config.sys
DEVICE=\net\protman.dos /I:\net
DEVICE=\net\dis_pkt.dos
DEVICE=\net\e100b.dos

If you want to change it to a boot disk containing drivers for several network cards, in these two files, in autoexec.bat, after \net\netbind.com, you can add commands to load other network card drivers one by one. For example, if there is another network card driver file like xxxx.com, you can add \net\xxxx.com. In config.sys, after DEVICE=\net\dis_pkt.dos, you can add DEVICE=\net\other_nic_driver.dos (replace other_nic_driver.dos with the actual file name of the other network card driver). But you need to ensure that the network card drivers are compatible and properly configured.

Floor1　raoli	Posted 2005-11-08 11:38
新手上路　Posts 6　Credits 16
The original file content: autoexec.bat @echo off prompt $p$g \net\netbind.com MOUSE.COM echo Loading... \ghost\ghost.exe config.sys DEVICE=\net\protman.dos /I:\net DEVICE=\net\dis_pkt.dos DEVICE=\net\e100b.dos If you want to add other network card drivers, in autoexec.bat, after \net\netbind.com, you can add commands to load other network card drivers in sequence. For example, if there is another network card driver file like xxxx.com, you can add \net\xxxx.com. In config.sys, after DEVICE=\net\dis_pkt.dos, you can add DEVICE=\net\other_nic_driver.dos (replace other_nic_driver.dos with the actual file name of the other network card driver). But you need to make sure that the network card drivers are compatible and properly configured. Translation: autoexec.bat @echo off prompt $p$g \net\netbind.com MOUSE.COM echo Loading... \ghost\ghost.exe config.sys DEVICE=\net\protman.dos /I:\net DEVICE=\net\dis_pkt.dos DEVICE=\net\e100b.dos If you want to change it to a boot disk containing drivers for several network cards, in these two files, in autoexec.bat, after \net\netbind.com, you can add commands to load other network card drivers one by one. For example, if there is another network card driver file like xxxx.com, you can add \net\xxxx.com. In config.sys, after DEVICE=\net\dis_pkt.dos, you can add DEVICE=\net\other_nic_driver.dos (replace other_nic_driver.dos with the actual file name of the other network card driver). But you need to ensure that the network card drivers are compatible and properly configured.

Floor2　raoli	Posted 2005-11-08 14:19
新手上路　Posts 6　Credits 16
Is there anyone who can help? Thank you

Floor3　raoli	Posted 2005-11-09 15:21
新手上路　Posts 6　Credits 16
Please哪位 expert can explain it?

Floor6　raoli	Posted 2005-11-10 15:26
新手上路　Posts 6　Credits 16
No one is willing to say anything, or just give a hint is also okay呀

Floor7　不得不爱	Posted 2005-11-10 17:17
超级版主　Posts 2,044　Credits 5,310　From 四川南充
What's the use of being so old? You need drivers for several kinds of network cards!

Floor4　raoli	Posted 2005-11-10 11:03
新手上路　Posts 6　Credits 16

Floor5　raoli	Posted 2005-11-10 12:43
新手上路　Posts 6　Credits 16

Floor8　不得不爱	Posted 2005-11-10 17:19
超级版主　Posts 2,044　Credits 5,310　From 四川南充
Does the boot disk made with Ghost 8.2 Enterprise Edition not drive several types of network cards?