How to transfer files to a server under pure DOS operating system? Urgent!!! - China DOS Union Forum

Dear great experts, I installed Microsoft Network Client 3.0 under DOS and connected two machines, and I can also ping the IP address, but I just don't know how to transfer files from one machine to another. Please experts give me some advice! (I entered FTP & TFTP, and it prompted that this command cannot be used in the pure DOS operating system) Urgent!!!!!

FTP should use the pure DOS version, which I have uploaded to the forum before. As for the use of MSCLIENT, please refer to the "DOS Usage" section of the website and the relevant teaching posts in the forum.

Thanks a lot for the administrator's proposal! But now I have the following problems: Installed MSCLIENT3 under a DOS operating system, connected it to a Windows2000 Server (or WindowsXP) with a network cable (crossover cable), everything was installed normally, and the error prompt was: Error6118 when using the Net View command; the error prompt was: The user has been Deleted in the WorkGroup when using the Net Use command. Please give experts pointers, urgent!

When this situation occurs, you need to edit the system.ini file in the installation directory of the ms client:
There is a parameter in this file used to set the user name, and the content is as follows:

sizworkbuf=1498
filesharing=no
printsharing=no
autologon=yes //Indicates automatic login to the server
computername=GUEST //Computer name of this machine
lanroot=C:\NET //This indicates the installation directory of the ms client
username=GUEST //Set the user name used to log in to the server here. It is best to clear the password of this Guest user on the server

workgroup=WORKGROUP
reconnect=yes
dospophotkey=N
lmlogon=0
logondomain=WORKGROUP
preferredredir=full
autostart=full
maxconnections=8

netcard=e100b.dos
transport=ndishlp.sys,*netbeui,tcpdrv.dos,nemm.dos
devdir=C:\NET
LoadRMDrivers=yes

TimerCriticalSection=5000
UniqueDosPSP=TRUE
PSPIncrement=2

*Shares=C:\NET\Shares.PWL
CAISHENGBO=C:\NET\CAISHENG.PWL
GUEST=C:\NET\GUEST.PWL

[ Last edited by wavedos on 2005-12-21 at 12:06 ]

Floor1　JustForYou	Posted 2005-10-24 17:29
新手上路　Posts 8　Credits 17
Dear great experts, I installed Microsoft Network Client 3.0 under DOS and connected two machines, and I can also ping the IP address, but I just don't know how to transfer files from one machine to another. Please experts give me some advice! (I entered FTP & TFTP, and it prompted that this command cannot be used in the pure DOS operating system) Urgent!!!!!

Floor2　Wengier	Posted 2005-10-25 13:07
系统支持　Posts 10,521　Credits 27,736
FTP should use the pure DOS version, which I have uploaded to the forum before. As for the use of MSCLIENT, please refer to the "DOS Usage" section of the website and the relevant teaching posts in the forum.

Floor3　JustForYou	Posted 2005-10-25 13:19
新手上路　Posts 8　Credits 17
Thanks a lot for the administrator's proposal! But now I have the following problems: Installed MSCLIENT3 under a DOS operating system, connected it to a Windows2000 Server (or WindowsXP) with a network cable (crossover cable), everything was installed normally, and the error prompt was: Error6118 when using the Net View command; the error prompt was: The user has been Deleted in the WorkGroup when using the Net Use command. Please give experts pointers, urgent!

Floor4　wavedos	Posted 2005-12-21 11:52
新手上路　Posts 4　Credits 12
When this situation occurs, you need to edit the system.ini file in the installation directory of the ms client: There is a parameter in this file used to set the user name, and the content is as follows: sizworkbuf=1498 filesharing=no printsharing=no autologon=yes //Indicates automatic login to the server computername=GUEST //Computer name of this machine lanroot=C:\NET //This indicates the installation directory of the ms client username=GUEST //Set the user name used to log in to the server here. It is best to clear the password of this Guest user on the server workgroup=WORKGROUP reconnect=yes dospophotkey=N lmlogon=0 logondomain=WORKGROUP preferredredir=full autostart=full maxconnections=8 netcard=e100b.dos transport=ndishlp.sys,netbeui,tcpdrv.dos,nemm.dos devdir=C:\NET LoadRMDrivers=yes TimerCriticalSection=5000 UniqueDosPSP=TRUE PSPIncrement=2 Shares=C:\NET\Shares.PWL CAISHENGBO=C:\NET\CAISHENG.PWL GUEST=C:\NET\GUEST.PWL [ Last edited by wavedos on 2005-12-21 at 12:06 ]