My network card, Intel onboard network card: Pro100/VE
The DOS driver on the CD cannot be loaded!
The ini file inside is: ; Protocol.Ini section for the Intel(R) PRO/100 Network Connection
DRIVERNAME = E100B$
;
; Some common parameters
;
; SPEED = [0 | 10 | 100]
; 0 = Auto (default)
;
; FORCEDUPLEX = [0 | 1 | 2]
; 0 = Auto (default); 1 = Half; 2 = Full
;
; SLOT = 0x38
;
; NODE = "00AA00123456"
;
; TRANSMITBUFFERS = 20 ; range 2 - 38
;
; RECEIVEBUFFERS = 20 ; range 2 - 38
;
; Note that TRANSMITBUFFERS + RECEIVEBUFFERS <= 40
;
; CACHEFLUSH = 0 ; set to 1 to allow the driver to hook the cache flush interrupt
; ; this is needed when doing unattended installations of NT 4
The CFG file is:
Link Driver E100BODI
; Remove the semi-colon in front of the frame type you will use.
; This frame type must match what the NetWare server is using.
; FRAME Ethernet_802.2
; FRAME Ethernet_802.3
; FRAME Ethernet_SNAP
; FRAME Ethernet_II
NetWare DOS Requester
FIRST NETWORK DRIVE = F
; If you know the name of your preferred server, remove the
; semi-colon below and enter the preferred server name after
; the equal sign.
;preferred server =
Who can tell me ah! Thanks a million!
The DOS driver on the CD cannot be loaded!
The ini file inside is: ; Protocol.Ini section for the Intel(R) PRO/100 Network Connection
DRIVERNAME = E100B$
;
; Some common parameters
;
; SPEED = [0 | 10 | 100]
; 0 = Auto (default)
;
; FORCEDUPLEX = [0 | 1 | 2]
; 0 = Auto (default); 1 = Half; 2 = Full
;
; SLOT = 0x38
;
; NODE = "00AA00123456"
;
; TRANSMITBUFFERS = 20 ; range 2 - 38
;
; RECEIVEBUFFERS = 20 ; range 2 - 38
;
; Note that TRANSMITBUFFERS + RECEIVEBUFFERS <= 40
;
; CACHEFLUSH = 0 ; set to 1 to allow the driver to hook the cache flush interrupt
; ; this is needed when doing unattended installations of NT 4
The CFG file is:
Link Driver E100BODI
; Remove the semi-colon in front of the frame type you will use.
; This frame type must match what the NetWare server is using.
; FRAME Ethernet_802.2
; FRAME Ethernet_802.3
; FRAME Ethernet_SNAP
; FRAME Ethernet_II
NetWare DOS Requester
FIRST NETWORK DRIVE = F
; If you know the name of your preferred server, remove the
; semi-colon below and enter the preferred server name after
; the equal sign.
;preferred server =
Who can tell me ah! Thanks a million!
