Experts, I need the driver for Pro100/VE network card under DOS. Help me, please! - China DOS Union Forum

My network card, Intel onboard network card: Pro100/VE

The DOS driver on the CD cannot be loaded!

The ini file inside is: ; Protocol.Ini section for the Intel(R) PRO/100 Network Connection

DRIVERNAME = E100B$
;
; Some common parameters
;
; SPEED = [0 | 10 | 100]
; 0 = Auto (default)
;
; FORCEDUPLEX = [0 | 1 | 2]
; 0 = Auto (default); 1 = Half; 2 = Full
;
; SLOT = 0x38
;
; NODE = "00AA00123456"
;
; TRANSMITBUFFERS = 20 ; range 2 - 38
;
; RECEIVEBUFFERS = 20 ; range 2 - 38
;
; Note that TRANSMITBUFFERS + RECEIVEBUFFERS <= 40
;
; CACHEFLUSH = 0 ; set to 1 to allow the driver to hook the cache flush interrupt
; ; this is needed when doing unattended installations of NT 4
The CFG file is:
Link Driver E100BODI
; Remove the semi-colon in front of the frame type you will use.
; This frame type must match what the NetWare server is using.
; FRAME Ethernet_802.2
; FRAME Ethernet_802.3
; FRAME Ethernet_SNAP
; FRAME Ethernet_II
NetWare DOS Requester
FIRST NETWORK DRIVE = F
; If you know the name of your preferred server, remove the
; semi-colon below and enter the preferred server name after
; the equal sign.
;preferred server =
Who can tell me ah! Thanks a million!

Floor1　星期三	Posted 2004-08-02 00:00
初级用户　Posts 1　Credits 106
My network card, Intel onboard network card: Pro100/VE The DOS driver on the CD cannot be loaded! The ini file inside is: ; Protocol.Ini section for the Intel(R) PRO/100 Network Connection DRIVERNAME = E100B$ ; ; Some common parameters ; ; SPEED = [0 \| 10 \| 100] ; 0 = Auto (default) ; ; FORCEDUPLEX = [0 \| 1 \| 2] ; 0 = Auto (default); 1 = Half; 2 = Full ; ; SLOT = 0x38 ; ; NODE = "00AA00123456" ; ; TRANSMITBUFFERS = 20 ; range 2 - 38 ; ; RECEIVEBUFFERS = 20 ; range 2 - 38 ; ; Note that TRANSMITBUFFERS + RECEIVEBUFFERS <= 40 ; ; CACHEFLUSH = 0 ; set to 1 to allow the driver to hook the cache flush interrupt ; ; this is needed when doing unattended installations of NT 4 The CFG file is: Link Driver E100BODI ; Remove the semi-colon in front of the frame type you will use. ; This frame type must match what the NetWare server is using. ; FRAME Ethernet_802.2 ; FRAME Ethernet_802.3 ; FRAME Ethernet_SNAP ; FRAME Ethernet_II NetWare DOS Requester FIRST NETWORK DRIVE = F ; If you know the name of your preferred server, remove the ; semi-colon below and enter the preferred server name after ; the equal sign. ;preferred server = Who can tell me ah! Thanks a million!

Floor3　pdl	Posted 2010-04-25 13:33
初级用户　Posts 19　Credits 44
Hope it's useful! http://www.cn-dos.net/forum/viewthread.php?tid=51040&fpage=1

Floor2　msc	Posted 2010-04-12 19:10
新手上路　Posts 2　Credits 4