One-key Recovery: Application - China DOS Union Forum - China DOS Union

Apply "One-key Restore" to any ordinary PC:
To install this program on an ordinary PC, there are four essential tools:
1. BMGR, that is, the core program of IBM's recovery system. You can download it from the following address:
(http://www-900.ibm.com/cn/support/download/attachment/JWUU-4ZNC86/d2dfdzip.exe)
Use WinRAR to extract BMGR.EXE, BOOT.BIN, and BMGURS.BK1 into the same folder, and rename BMGURS.BK1 to BMGURS.SCR.
2. Win98 boot disk (except system files, it only needs to contain sys.com, smartdrv.exe, himem.sys three files)
3. PartitionMagic 8.0 for Windows
4. Ghost 7.75 and above DOS versions

The operation process is as follows:
Use PartitionMagic to create a new partition in the last partition of the hard disk, volume label: IBM_SERVICE, file system: FAT32 (other partitions are all NTFS), capacity: 2GB, type: primary partition.
Create a BMGR folder under this partition, copy the three files BMGR.EXE, BOOT.BIN, and BMGURS.SCR to it. And copy GHOST.EXE to the root directory of this partition.
Open Notepad and write the following four files:
Autoexec.bat
@Echo Off
Cls
Echo.
Echo Press any key to restore your system.
Echo Press “Ctrl+C”to give up.
Echo And press “Ctrl+Alt+Delete”to restart your computer.
Echo.
Pause
Smartdrv.exe
Ghost.exe @Restore.txt

Config.sys
Device=C:\himem.sys

Backup.txt
–Clone,Mode=Pcreate,Src=1:1,Dst=C:\Backup.gho –Z9 –Fx -Sure

Restore.txt
–Clone,Mode=Prestore,Src=C:\Backup.gho,Dst=1:1 –Rb –Sure

Save the above three files and place them in the root directory of this partition.
Boot the computer with the Win98 boot disk, copy Smartdrv.exe and himem.sys to the root directory of this partition, execute the SYS command to transfer the system files to this partition (sys a: c

, so that it can be booted.
Execute
BMGR\bmgr.exe /Fboot.bin /Mbmgr.scr /s
Don't rush to start the computer, execute
GHOST @Backup.txt
Back up the current system to this partition for future restoration.
At this point, a complete "one-key restore" system is completed. Restart the computer, and this system will officially start running. When your system crashes, restart the computer, and when you see the prompt:
To Start the IBM Product Recovery Program, press F11
Press F11, and you can automatically restore your system.
Of course, to prevent misoperation, you will see the confirmation prompt at this time:
Press any key to restore your system.
Press “Ctrl+C”to give up.
And press “Ctrl+Alt+Delete”to restart your computer.
That is,
Press any key, and the system will be restored.
Press "Ctrl+C" to abort the current operation.
And press "Ctrl+Alt+Delete" to restart your computer.

Floor1　SNOWOLF	Posted 2004-06-22 00:00
中级用户　Posts 88　Credits 483
Apply "One-key Restore" to any ordinary PC: To install this program on an ordinary PC, there are four essential tools: 1. BMGR, that is, the core program of IBM's recovery system. You can download it from the following address: (http://www-900.ibm.com/cn/support/download/attachment/JWUU-4ZNC86/d2dfdzip.exe) Use WinRAR to extract BMGR.EXE, BOOT.BIN, and BMGURS.BK1 into the same folder, and rename BMGURS.BK1 to BMGURS.SCR. 2. Win98 boot disk (except system files, it only needs to contain sys.com, smartdrv.exe, himem.sys three files) 3. PartitionMagic 8.0 for Windows 4. Ghost 7.75 and above DOS versions The operation process is as follows: Use PartitionMagic to create a new partition in the last partition of the hard disk, volume label: IBM_SERVICE, file system: FAT32 (other partitions are all NTFS), capacity: 2GB, type: primary partition. Create a BMGR folder under this partition, copy the three files BMGR.EXE, BOOT.BIN, and BMGURS.SCR to it. And copy GHOST.EXE to the root directory of this partition. Open Notepad and write the following four files: Autoexec.bat @Echo Off Cls Echo. Echo Press any key to restore your system. Echo Press “Ctrl+C”to give up. Echo And press “Ctrl+Alt+Delete”to restart your computer. Echo. Pause Smartdrv.exe Ghost.exe @Restore.txt Config.sys Device=C:\himem.sys Backup.txt –Clone,Mode=Pcreate,Src=1:1,Dst=C:\Backup.gho –Z9 –Fx -Sure Restore.txt –Clone,Mode=Prestore,Src=C:\Backup.gho,Dst=1:1 –Rb –Sure Save the above three files and place them in the root directory of this partition. Boot the computer with the Win98 boot disk, copy Smartdrv.exe and himem.sys to the root directory of this partition, execute the SYS command to transfer the system files to this partition (sys a: c, so that it can be booted. Execute BMGR\bmgr.exe /Fboot.bin /Mbmgr.scr /s Don't rush to start the computer, execute GHOST @Backup.txt Back up the current system to this partition for future restoration. At this point, a complete "one-key restore" system is completed. Restart the computer, and this system will officially start running. When your system crashes, restart the computer, and when you see the prompt: To Start the IBM Product Recovery Program, press F11 Press F11, and you can automatically restore your system. Of course, to prevent misoperation, you will see the confirmation prompt at this time: Press any key to restore your system. Press “Ctrl+C”to give up. And press “Ctrl+Alt+Delete”to restart your computer. That is, Press any key, and the system will be restored. Press "Ctrl+C" to abort the current operation. And press "Ctrl+Alt+Delete" to restart your computer.