China DOS Union

It doesn't matter!
This is a bug of Tianhui.
I thought about it for a long time before figuring out the solution.
That is, load the program after Tianhui is loaded,
and then clear the screen.
In this way, this situation is basically not seen on my machine!
But there are still some problems on individual machines!
This is mainly a problem with the monitor!

Scandisk seems not to be localized?

This is really helpless!
After all, Microsoft has added multiple layers of protection!
Dead Microsoft
Microsoft's software is the most difficult to localize,
The moderator seems to have no way with it either!
Originally I didn't plan to put it in,
But after all, there are many people using it!

How long does it take to detect and repair a 60G hard drive? The thread starter hasn't replied yet. Is it really 30 - 40 hours?

It depends on the situation!
One is the speed of the hard disk,
Two is whether there is physical damage,
Don't worry, this displayed time is the same as the installation time of win98, which is misleading!
It's not that long,
My hard disk is 40G, just used for less than half an hour,
And it's done!
If there are bad sectors, it's hard to say!
The time will tend to N~~~
But don't worry, this is definitely the fastest disk repair tool except for the efficiency source disk repair,
Basically, no software can exceed it!

Then I can rest assured. At the beginning, I really didn't dare to repair... Just thinking about not being able to surf the Internet for two whole nights.... Too scary: (

Why do you have a bad hard drive!

I said what you provided:
Now upload the re - packed EBD.CAB and TOOL.CAB!
The following is EBD.CAB
Click to browse this file
The following is TOOL.CAB
Click to browse this file

Is this asking us to overwrite the original file or is the one you posted on the top floor already the modified one?

Overwrite the original file!

The following is a quote from jhhjwok on 2003-7-30 12:30:42:
After I downloaded ebd.cab and tool.cab, I copied them to the just - made original floppy disk, and it prompted "The floppy disk is full, please change to a blank floppy disk." After changing several times, the problem remained the same. I found that the size of ebd.cab is 371kb and the size of tool.cab is 141kb, which can't replace the original ebd.cab and tool.cab at all. Now after re - making, I found that the size of ebd.cab is 347kb and the size of tool.cab is 125kb, and the replacement of the original ebd.cab and tool.cab is successful!!!
ebd.cab:
Open the attachment
tool.cab:
Open the attachment

Can we use his?

The following is the speech of Shen Jie on 2003-8-1 3:24:34:

The following is the speech of Shen Jie on 2003-7-30 0:33:34:
O I know what the problem is!
? It's again the problem of too high compression ratio of CAB package!
? I have encountered it before,
? Some people said it was because of the extracted result of the compressed file,
? But I don't think so!
? As a result, after I GHOSTed the system once, everything was OK!
? I always suspected that there was a problem with the boot sector,
? I also asked the moderator about this but there was no recovery,
? You can try to extract EBD.CAB and TOOL.cab from the boot disk, repackage them,
? If there is not enough space, delete scandisk!?
? It's best to choose MSZIP when packaging,
? Although the volume will be a little larger,
? But it must work,
? Stable ah!

? Also, please let the moderator come out and say,
? Can you help analyze a real reason?

The following is the speech of Shen Jie on 2003-7-30 1:12:03:
Now upload the repackaged EBD.CAB and TOOL.CAB!
? Below is EBD.CABOpen attachment
? Below is TOOL.CABOpen attachment

?

Another unlucky guy,
Look at the above text!
I'm going to watch Gundam Seed!

Use the above one!

This is not bad.

Good things are certainly liked by everyone!

The following is the statement from Shen Jie on 2003-7-30 21:56:06:
The English prompt of the COPY command is in COMMAND.COM!
In fact, the best way is to localize COMMAND!
But I don't have the mind to localize this kind of thing!
Still rely on the automatic translation function of Tianhui!

Does Tianhui have an automatic translation function?

Tianhui has an automatic translation font!
It can be used for translation.
The advantage is that the translated word meanings are very correct,
and it occupies very little memory!
The disadvantage is that it can only localize specific programs!
And the file size is relatively large.

Most programs built-in under MS-DOS 7.10
can be localized.
However, DOS such as ROM-DOS, FREE-DOS, which are not produced by Microsoft, are mostly not supported!
Whether it supports localization or not mainly depends on whether the English prompts of these external programs are consistent with those of MS-DOS 7.10.
If they are consistent, they will be automatically localized.
This disadvantage is very obvious!
Originally, I wanted to use this function to just throw in some MS-DOS built-in programs.
But then I thought I should serve everyone more.
So I localized those non-MS-DOS programs myself!
Like Xcopy and so on are localized by me.
But the advantages are also very obvious!
That is, the translation is particularly accurate,
the memory is easily loaded into the UMB,
it can be loaded and used all the time,
and there will be no compatibility problems.
After all, it is not a resident program like the DOS version of Oriental Express.