Characteristics of the Super Universal MS-DOS 7.10 Boot Disk - China DOS Union Forum

I also think there is absolutely no need to use a LOGO. After all, it's DOS, and it's just a boot disk, which should focus on practicality. Also, when I see that LOGO screen, I have a somewhat uncomfortable feeling.

That's great, there's no way to not support it!

I always get a system crash when selecting 3 and 4.

Phenomenon:
driveE: <not installed>
driveF: <not installed>
Then it crashes.

When booting, you can choose the boot method, but why can't I? What should I do? Thanks!

I have made the bootable disk. But why can't I see my hard disk? There is no drive letter for the hard disk... But the USB flash drive has a drive letter under DOS... What's the matter with this??? And sometimes it dies during booting as mentioned above... I have used it on several machines already...

How did you make the bootable disk? Otherwise, how would others know the reason?

This is this bootable disk. I made it with winimage as per the instructions above... It says on startup that I can see the NTFS partition under DOS. Why can't I see it... Is there something else I need to load...

Happy New Year:

Using the super universal MS-DOS 7.10 boot disk you made yourself, it works normally on the 810 motherboard with a Seagate ATA hard drive of 4.3G (C:2G NTFS, D:2.3G FAT32). But on the Abit NF7-S with a Seagate Barracuda 7200.7/ST380013AS 80G/7200rpm/8M/S-ATA/ATA 150/3.5-inch hard drive (C:4G with Windows XP installed, D:5G, E:10G, F:30G, the remaining 20G is not partitioned and planned to install LINUX for fun).

The first and second items of the super universal MS-DOS 7.10 boot disk can be used, and then run DISKGEN to back up the hard disk partition table.

The third item freezes and the fourth item cannot find the hard disk.

When I installed Windows XP before, I needed to press F6 and then press S. Load http://www.abit.com.cn/drivers/SATA_DRV_DISK/disk133.exe. After decompressing, \disk133\SATA_DriverDisk_V1.33\silicon\3112 (needs to be copied to the root directory of the floppy disk) so that Windows XP can recognize the hard disk, otherwise it cannot find the hard disk.

How to recognize the NTFS partition in the S-ATA hard disk in the super universal MS-DOS 7.10 boot disk you made yourself. If there is a download, please give a download link.

Now after starting with item 1 or 2 (LOGO.SYS deleted), load NTFSDOS /U, which can recognize the hard disk and read the GHOST inside. I choose the 936 code when starting and load XZL, but it cannot support Chinese, (but this problem is not a problem)! In a word: a very great boot disk.

Wish:
Good health,
Make a fortune in the new year,
Technology gets to a higher level.

Give it a try first!

It's really good. I installed it, thank you.

Why can't I find the drive letter of the floppy disk after I burned it into a CD bootable disk? Neither A nor B is it. Tell me which drive letter the floppy disk is.

I downloaded it for use, and it's not normal. Selecting 1 and 2 is okay, but when selecting 3 and 4, it freezes at lh ctmouse.exe.

It's too advanced. I have to bookmark it first. Learn slowly. Salute to all the experts!

Hehe, not bad. Support the boss for releasing such an excellent software.

Help: After booting the machine with this bootable disk, the USB hard drive can be used, but the machine's own hard drive cannot be used?!

Floor361　dangzhou	Posted 2004-11-25 00:00
初级用户　Posts 9　Credits 128
I also think there is absolutely no need to use a LOGO. After all, it's DOS, and it's just a boot disk, which should focus on practicality. Also, when I see that LOGO screen, I have a somewhat uncomfortable feeling.

Floor362　jpll	Posted 2004-12-13 00:00
初级用户　Posts 7　Credits 118
That's great, there's no way to not support it!

Floor363　cedrus	Posted 2004-12-21 00:00
初级用户　Posts 4　Credits 111
I always get a system crash when selecting 3 and 4. Phenomenon: driveE: <not installed> driveF: <not installed> Then it crashes.

Floor364　zdq789	Posted 2004-12-31 00:00
初级用户　Posts 10　Credits 182
When booting, you can choose the boot method, but why can't I? What should I do? Thanks!

Floor365　tiger	Posted 2005-01-25 00:00
初级用户　Posts 3　Credits 110
I have made the bootable disk. But why can't I see my hard disk? There is no drive letter for the hard disk... But the USB flash drive has a drive letter under DOS... What's the matter with this??? And sometimes it dies during booting as mentioned above... I have used it on several machines already...

Floor366　GOTOmsdos	Posted 2005-01-25 00:00
铂金会员　Posts 1,827　Credits 5,154
How did you make the bootable disk? Otherwise, how would others know the reason?

Floor367　tiger	Posted 2005-01-26 00:00
初级用户　Posts 3　Credits 110
This is this bootable disk. I made it with winimage as per the instructions above... It says on startup that I can see the NTFS partition under DOS. Why can't I see it... Is there something else I need to load...

Floor368　quanyongji	Posted 2005-02-09 00:00
初级用户　Posts 35　Credits 161
Happy New Year: Using the super universal MS-DOS 7.10 boot disk you made yourself, it works normally on the 810 motherboard with a Seagate ATA hard drive of 4.3G (C:2G NTFS, D:2.3G FAT32). But on the Abit NF7-S with a Seagate Barracuda 7200.7/ST380013AS 80G/7200rpm/8M/S-ATA/ATA 150/3.5-inch hard drive (C:4G with Windows XP installed, D:5G, E:10G, F:30G, the remaining 20G is not partitioned and planned to install LINUX for fun). The first and second items of the super universal MS-DOS 7.10 boot disk can be used, and then run DISKGEN to back up the hard disk partition table. The third item freezes and the fourth item cannot find the hard disk. When I installed Windows XP before, I needed to press F6 and then press S. Load http://www.abit.com.cn/drivers/SATA_DRV_DISK/disk133.exe. After decompressing, \disk133\SATA_DriverDisk_V1.33\silicon\3112 (needs to be copied to the root directory of the floppy disk) so that Windows XP can recognize the hard disk, otherwise it cannot find the hard disk. How to recognize the NTFS partition in the S-ATA hard disk in the super universal MS-DOS 7.10 boot disk you made yourself. If there is a download, please give a download link. Now after starting with item 1 or 2 (LOGO.SYS deleted), load NTFSDOS /U, which can recognize the hard disk and read the GHOST inside. I choose the 936 code when starting and load XZL, but it cannot support Chinese, (but this problem is not a problem)! In a word: a very great boot disk. Wish: Good health, Make a fortune in the new year, Technology gets to a higher level.

Floor369　goast	Posted 2005-02-17 00:00
初级用户　Posts 2　Credits 108
Give it a try first!

Floor370　home	Posted 2005-02-28 00:00
初级用户　Posts 27　Credits 170
It's really good. I installed it, thank you.

Floor371　乔诗	Posted 2005-03-19 00:00
初级用户　Posts 1　Credits 104
Why can't I find the drive letter of the floppy disk after I burned it into a CD bootable disk? Neither A nor B is it. Tell me which drive letter the floppy disk is.

Floor372　ykran	Posted 2005-03-21 00:00
初级用户　Posts 1　Credits 105
I downloaded it for use, and it's not normal. Selecting 1 and 2 is okay, but when selecting 3 and 4, it freezes at lh ctmouse.exe.

Floor373　whcn	Posted 2005-04-19 00:00
初级用户　Posts 1　Credits 103
It's too advanced. I have to bookmark it first. Learn slowly. Salute to all the experts!

Floor374　sadan	Posted 2005-04-23 00:00
初级用户　Posts 3　Credits 110
Hehe, not bad. Support the boss for releasing such an excellent software.

Floor375　常州小新	Posted 2005-04-23 00:00
初级用户　Posts 1　Credits 101
Help: After booting the machine with this bootable disk, the USB hard drive can be used, but the machine's own hard drive cannot be used?!