Experts, download it and give it a try.
China DOS Union
Union site: www.cn-dos.net Forum site: www.cn-dos.net/forum
DOS stands for freedom, openness and progress. Let us work hard, learn from the openness and GNU spirit of FreeDOS and Linux, and together build and grow a free GNU GPL world!
中国DOS联盟论坛 » DOS启动盘 & LOGO技术 （启动盘室） » I have invented a DOS boot disk to drive a USB 2.0 flash drive, leading in China!
View 172,177 Replies 718
Floor 241
Posted 2007-10-29 20:07 · 中国 重庆 广电网
Floor 242
Posted 2007-10-29 20:46 · 中国 北京 海淀区 联通
goooooooooooooooood
Floor 243
Posted 2007-10-30 01:43 · 中国 吉林 长春 教育网
I'm looking for a bootable disk right now. I'll download the following right away to see if it works.
Floor 244
Posted 2007-10-30 10:12 · 中国 河北 衡水 联通
Hope it can work. Come down and take a look
Floor 245
Posted 2007-10-31 19:42 · 中国 重庆 巴南区 电信
To download, give it a thumbs up
Floor 246
Posted 2007-11-01 00:22 · 中国 湖北 武汉 电信
Good stuff oh
Floor 247
Posted 2007-11-01 15:05 · 中国 江苏 无锡 电信
Let's see if it can be used?
Floor 248
Posted 2007-11-01 21:36 · 中国 天津 联通
It's a pity there's no new machine, otherwise I'd test it.
Floor 249
Posted 2007-11-05 18:12 · 中国 河南 郑州 联通
You're welcome!
Floor 250
Posted 2007-11-06 10:34 · 中国 浙江 温州 电信
trrrrrrrrrr
Floor 251
Posted 2007-11-07 08:58 · 中国 黑龙江 哈尔滨 联通
Give it a support
Floor 252
Posted 2007-11-07 10:56 · 中国 河南 平顶山 联通
Thanks, I'll download it and try it out.
Floor 253
Posted 2007-11-07 23:38 · 中国 宁夏 银川 电信
**Post #15**: My USB 2.0 fails to boot on the Soltek motherboard
My USB is 2.0, can transfer files on the Soltek motherboard, and I also made it into a bootable USB drive, which can boot on another 845 motherboard, but just can't boot on the Soltek motherboard. I made a bootable floppy disk according to the building - owner's method, but still can't be recognized after booting.
The screen display is as follows:
USB Drive support enabled
Drive I : <Not Installed>
ASPI D device : ID : 0 LUN : 0 = SZHX SKYMEDI 1.00
DI1000 ASPI DISK Driver Ver 2.00
Availeble ID = 0
ID 0 = HD .. SZHX SKYMEDI
#1 : ??? _ (cursor flashing)
It didn't continue.
Please give experts' guidance.
I also encountered a similar problem. The solution is not to insert the USB drive too early, but to insert it after the computer self - checks. I don't know the reason either!
My USB is 2.0, can transfer files on the Soltek motherboard, and I also made it into a bootable USB drive, which can boot on another 845 motherboard, but just can't boot on the Soltek motherboard. I made a bootable floppy disk according to the building - owner's method, but still can't be recognized after booting.
The screen display is as follows:
USB Drive support enabled
Drive I : <Not Installed>
ASPI D device : ID : 0 LUN : 0 = SZHX SKYMEDI 1.00
DI1000 ASPI DISK Driver Ver 2.00
Availeble ID = 0
ID 0 = HD .. SZHX SKYMEDI
#1 : ??? _ (cursor flashing)
It didn't continue.
Please give experts' guidance.
I also encountered a similar problem. The solution is not to insert the USB drive too early, but to insert it after the computer self - checks. I don't know the reason either!
Floor 254
Posted 2007-11-08 17:02 · 中国 广东 深圳 电信
Thank you very much, but it can't be downloaded. Does anyone can help?
Floor 255
Posted 2007-11-09 15:29 · 中国 上海 腾讯云
It doesn't work with 2.0, forget it
Forum Jump: