1: To obtain pure DOS, generally, you can install DOS 6.22 or DOS 7.0. Since Win 2000, Win XP, and Win Vesta do not fully support DOS, it is recommended to install a second operating system - Win 98 system to obtain DOS 7.0.
2: Because a large number of pure DOS installed additionally under Win XP basically automatically install the Chinese system after startup, which wastes a lot of conventional memory. It is recommended to install a second operating system - Win 98 system to obtain DOS 7.0.
3: If running under Windows 2000 or Win XP, configure the "XmsStyle" keyboard configuration in the "Boot" section of the Config.Sys file in the Sail30000 directory to "1" and use disk emulation to expand memory. If running under pure DOS or Win 9X, configure the "XmsStyle" keyboard configuration in the "Boot" section of the Config.Sys file in the Sail30000 directory to "0" and directly use expanded memory.
4: To check memory, type the "mem/c" command at the DOS command line.
The C:\Config.Sys should be configured as follows (if it is DOS 6.22, change Windows to DOS)
Device=C:\Windows\Himem.Sys/TestMem:Off
Device=C:\Windows\Emm386.Exe noems novcip
DOS=High,Umb
Stacks=9,256
Files=30
The C:\Autoexec.Bat should be configured as follows (if it is DOS 6.22, change Windows to DOS)
path C:\Windows;C:\Windows\Command;C:\Bc31\Bin
Lh SmartDrv.Exe
[ Last edited by firstsail on 2007-8-27 at 10:21 AM ]
2: Because a large number of pure DOS installed additionally under Win XP basically automatically install the Chinese system after startup, which wastes a lot of conventional memory. It is recommended to install a second operating system - Win 98 system to obtain DOS 7.0.
3: If running under Windows 2000 or Win XP, configure the "XmsStyle" keyboard configuration in the "Boot" section of the Config.Sys file in the Sail30000 directory to "1" and use disk emulation to expand memory. If running under pure DOS or Win 9X, configure the "XmsStyle" keyboard configuration in the "Boot" section of the Config.Sys file in the Sail30000 directory to "0" and directly use expanded memory.
4: To check memory, type the "mem/c" command at the DOS command line.
The C:\Config.Sys should be configured as follows (if it is DOS 6.22, change Windows to DOS)
Device=C:\Windows\Himem.Sys/TestMem:Off
Device=C:\Windows\Emm386.Exe noems novcip
DOS=High,Umb
Stacks=9,256
Files=30
The C:\Autoexec.Bat should be configured as follows (if it is DOS 6.22, change Windows to DOS)
path C:\Windows;C:\Windows\Command;C:\Bc31\Bin
Lh SmartDrv.Exe
[ Last edited by firstsail on 2007-8-27 at 10:21 AM ]
