China DOS Union

I modified the config and autoexec files of Wengier's new version of DOS710, and can drive all the USB mobile devices I have at hand (actually not many).

If you add DUSE.EXE, you must not add EMM386, no matter before or after!

My modified CONFIG.SYS:

MENUITEM=M1,USB1 USB-CDRW
MENUITEM=M2,USB2 IBM USB-HDD, USB-CDRW
MENUITEM=M3,USB3 D-Bridg USB-HDD, MiniKing FLASH-DISK
MENUITEM=M4,USB4 DENGKO FLASH-DISK
MENUITEM=M5,USB5
MENUITEM=M6,USB 2.0
MENUITEM=M7,IEEE1394
MENUITEM=M8,EMM386(NOEMS)
MENUDEFAULT=M1,15


DEVICE=HIMEM.SYS
DEVICE=DUSE.EXE INT EMU CDW=3 DDW=3 XFER=32 DRIVES=2 CDD=USB-CD
DEVICEHIGH=VIDE-CDD.SYS /D:IDE-CD


DEVICE=HIMEM.SYS
DEVICE=EMM386.EXE NOEMS
DEVICEHIGH=VIDE-CDD.SYS /D:IDE-CD
DEVICEHIGH=USBASPI.SYS
DEVICEHIGH=DI1000DD.SYS
DEVICEHIGH=USBCD.SYS /D:USB-CD


DEVICE=HIMEM.SYS
DEVICE=VIDE-CDD.SYS /D:IDE-CD
DEVICE=ASPIOHCI.SYS /INT /ALL
DEVICE=ASPIOHCI.SYS /INT /ALL /D1
DEVICE=ASPIOHCI.SYS /INT /ALL /D2
DEVICE=ASPIOHCI.SYS /INT /ALL /D3
DEVICE=ASPIUHCI.SYS /INT /ALL
DEVICE=ASPIUHCI.SYS /INT /ALL /D1
DEVICE=ASPIUHCI.SYS /INT /ALL /D2
DEVICE=ASPIUHCI.SYS /INT /ALL /D3
DEVICE=DI1000DD.SYS
DEVICE=USBCD.SYS /D:USB-CD


DEVICE=HIMEM.SYS
DEVICE=VIDE-CDD.SYS /D:IDE-CD
DEVICE=ASPIOHCI.SYS /INT /ALL
DEVICE=ASPIOHCI.SYS /INT /ALL /D1
DEVICE=ASPIOHCI.SYS /INT /ALL /D2
DEVICE=ASPIOHCI.SYS /INT /ALL /D3
DEVICE=ASPIUHCI.SYS /INT /ALL
DEVICE=ASPIUHCI.SYS /INT /ALL /D1
DEVICE=ASPIUHCI.SYS /INT /ALL /D2
DEVICE=ASPIUHCI.SYS /INT /ALL /D3
DEVICE=USBCD.SYS /D:USB-CD


DEVICE=HIMEM.SYS
DEVICE=EMM386.EXE NOEMS
DEVICEHIGH=VIDE-CDD.SYS /D:IDE-CD
DEVICEHIGH=USBASPI2.SYS
DEVICEHIGH=DI1000DD.SYS
DEVICEHIGH=USBCD.SYS /D:USB-CD


DEVICE=HIMEM.SYS
DEVICE=VIDE-CDD.SYS /D:IDE-CD
DEVICE=ASPIEHCI.SYS /INT /ALL
DEVICE=ASPIEHCI.SYS /INT /ALL /D1
DEVICE=ASPIEHCI.SYS /INT /ALL /D2
DEVICE=ASPIEHCI.SYS /INT /ALL /D3
DEVICE=USBCD.SYS /D:USB-CD


DEVICE=HIMEM.SYS
DEVICE=VIDE-CDD.SYS /D:IDE-CD
DEVICE=ASPI1394.SYS /INT /ALL
DEVICE=ASPI1394.SYS /INT /ALL /D1
DEVICE=ASPI1394.SYS /INT /ALL /D2
DEVICE=ASPI1394.SYS /INT /ALL /D3


DEVICE=HIMEM.SYS
DEVICE=EMM386.EXE NOEMS
DEVICEHIGH=VIDE-CDD.SYS /D:IDE-CD


SHELL=COMMAND.COM /P /E:640
SET TMP=C:\
SET TEMP=C:\
DOS=HIGH,UMB,AUTO
NUMLOCK=OFF
FCBSHIGH=4,0
FILESHIGH=30
BUFFERSHIGH=30,0
LASTDRIVEHIGH=32
STACKSHIGH=9,256

*Please first obtain the GUEST.EXE file.

My modified AUTOEXEC.BAT:

@ECHO OFF
KPUSH 27 27
KPUSH>NUL
TM /F
LH KILLER
LH DOSKEY
LH CTMOUSE
::Note: The following line is for the compatibility on some systems:
LH CTMOUSE>NUL
IF NOT %CONFIG%#==M4# IF NOT %CONFIG%#==M6# IF NOT %CONFIG%#==M7# GOTO BOOT
GUEST
:BOOT
DREADY C:
IF ERRORLEVEL 1 GOTO NOHD
ECHO Y|LOCK C:>NUL
:NOHD
LH SHSUCDX /D:?IDE-CD /D:?USB-CD
XMSDSK 4096 /Y
FINDRAMD>NUL
IF %RAMDRIVE%#==# GOTO NORAM
IF NOT EXIST %RAMDRIVE%\TEMP\NUL MD %RAMDRIVE%\TEMP
SET TMP=%RAMDRIVE%\TEMP
SET TEMP=%RAMDRIVE%\TEMP
IF NOT EXIST %RAMDRIVE%\SYSTEM\NUL MD %RAMDRIVE%\SYSTEM
COPY COMMAND.COM %RAMDRIVE%\SYSTEM>NUL
IF NOT EXIST %RAMDRIVE%\SYSTEM\COMMAND.COM GOTO COPYERR
SET COMSPEC=%RAMDRIVE%\SYSTEM\COMMAND.COM
EXTRACT /E /Y /L %RAMDRIVE%\SYSTEM DOSET.CAB>NUL
:COPYERR
PATH=%RAMDRIVE%.;%RAMDRIVE%\SYSTEM
IF %CONFIG%#==M1# GOTO NEXT
LH SMARTDRV 4096 2048 /X
GOTO NEXT
:NORAM
ECHO Warning: Can't create RAM disk!
:NEXT
SET DIRCMD=/OGN /4
SET PROMPT=$P$G
PATH=%PATH%;C:.;A:.;..
LH ZENO /Q
LH MOUSCLIP /M
LH DOSLFN /C- /Z:CP936UNI.TBL
LH ESCAPE
FINDCD /Q
CLS
WRITEXT 1 1 -f15 Note:
ECHO.
IF NOT %CDROM%#==# ECHO For accessing CD/DVD drive, use the drive letter %CDROM%(1st).
IF NOT %RAMDRIVE%#==# ECHO For accessing RAM drive, use the drive letter %RAMDRIVE%.
ECHO ------Wengier MS-DOS 7.10-------
ECHO For accessing NTFS, type NTFSDOS(/U for Unicode support) at the command line.
ECHO For CHINESE SYSTEM, type ZW (bigbadbird add)at the command line.
ECHO At any time, you can press F12 key to return to DOS, or use the mouse.
BREAK ON
LFNFOR ON
:END
ECHO.

If you have successfully driven, please reply, what device, which item to use, let everyone know which can be driven and which cannot be driven, thank you!
The devices I successfully drove are: Mobile Star external optical drive box USB2.0 Item 1, 2
IBM mobile hard disk USB2.0 Item 2
D-Bridg mobile hard disk (HD2401) USB1.1 Item 3
Patriot MINIKING 32M USB1.1 Item 3, 4
Denke flash drive 32M USB1.1 Item 4

Moderator, after I used your super bootable disk, my Saisi 64MB F4 type flash memory can be recognized, but after entering the drive letter, the system prompts that the drive letter is not found, please enter the correct drive letter. How should I handle this? Thank you

I successfully drove the Youshi Chulingtong Century Classic USB flash drive with Motto Hairu, but it conflicts with ntfsdos. Whether it's the read-only version in wengier's boot disk or the 4.03 version, it freezes as soon as it runs.

Masters:
There is something wrong with my computer, and there is something wrong with the printer program.

Asking moderator Wengier: My computer can only use a USB keyboard. It was normal at first. After loading the USB driver in CONFIG.SYS, the keyboard fails (without crashing). In order to find the problem, I only kept the basic parts and the USB driver part in CONFIG.SYS, shielded AUTOEXEC.BAT, and tested one by one, but the result is still the same. I hope the moderator can help solve it.
Thank you!

I use a BenQ USB external burner. When using the MSDOS710 driver, the third item is loaded successfully. When using the fourth item, after finding the USB device, there is no response for a long time!

What is the function of the /D1 parameter?

I successfully used the system disk made by bigbadbird to drive the Longshine 16M flash drive.

The boot disk of IBM's PC DOS 7.1 seems to be unable to boot the Mobile Star external hard drive enclosure (USB 2.0 version)!

I want to make a bootable CD (function is to be able to boot through USB CDROM and be able to drive the USB CD-ROM under DOS.) I used the DOS 7.10 super boot disk here to burn into the CD. Boot through USB CDROM. But as soon as I get to the part of driving the USB CD-ROM, it prompts me to enter the execution path of the command.com file. Can you guys help out?

USB CD-ROM support enabled
CD-ROM: 'Sony CD-RW CRX140E'

USB drive support enabled
Drive E :

Not ready reading drive A
Abort, Retry, Fail?
(End)
The result is that the USB CD-ROM was not successfully loaded. The problem should be with "not installed", but exactly what is not installed? Please, experts, give advice! In the end, even the A drive for executing the duse command couldn't be found.

My Lenovo notebook's optical drive is also broken. It costs 1000 yuan to replace it. I have a Toshiba mobile hard disk with USB 1.0. Can everyone help? Can I use the mobile hard disk under DOS? Thanks in advance.