VTGBK v2.00--GBK Code & 110 Characters (+FNT.COM=220 Characters)
VTGBK.com V2.00 is a new member of the VTmagic.com series. It ① supports GBK code simplified and traditional character shapes, facilitating source text editing under the window; ② allows a maximum of 110 non - repeating Chinese characters to be displayed on the same screen, with a larger capacity; ③ the error cause of some CRT/LCD monitors should be insufficient bandwidth (such as the resolution of only 640x400 causing the non - existence of the 9th column), and it cannot support the 8-column/9-column setting of Western characters. So, considering the hardware compatibility of the universal boot disk, VTGBK generates the.EXE version without setting the column width by default (if you want the Chinese character shape display to be perfect, use VTGBK/xxx to generate the seamless version (with; set to be with seams)); ④ this version no longer has many parameters like the VTmagic.com 5.10 version, and it is simple and easy to use. ⑤ Thoughtful design: if the source text is too large (exceeding 110 non - repeating Chinese characters), although VTGBK reports an error showing the 111th Chinese character shape, it still generates the.NEW (truncated)/.EXE file to facilitate checking the specific location. ⑥ Adds seam type and character set number setting. ⑦ Adds the VT font file toolbox, allowing up to 220 Chinese characters to be displayed on the same screen for dual character sets! ! !
Note:
Since more than 64 Chinese characters may be displayed, the usual basic Western characters may be displayed in a messy way. At this time, as long as you type the specific xxx.EXE f at the DOS command line, the normal Western display can be restored.
It is suggested that no more than 64 Chinese characters be set in CONFIG.SYS!
VTmagicGBK.com helps non-Chinese character systems display 110 Chinese characters!
VGA_Text magic only she can do it (GBK version) generates "font.EXE & text.NEW" V2.00 (C)2007.4.19
Design: Luo MingAn Luo Mingan (also known as: Born2be Ben Shi)
===Brief Tutorial===
VTGBK textfile.TXT<Enter> -- Generate.NEW/.EXE
textfile.EXE<Enter> -- Load new font
TYPE textfile.NEW<Enter> -- Browse.NEW new code text
EDIT textfile.NEW<Enter> -- Edit.NEW new code text
textfile.EXE any parameter<Enter> -- Restore original system font
===More Information=== Use FNT.COM to unleash the potential of VT font!
VTGBK textfile
^^0--7=character set 0--7(default 0) 8,9=seamless, with seams(default no setting 8/9)
Generate textfile.NEW & textfile.EXE (need C:\ or.\GBK16 or HZK16).
(To generate Chinese font library GBK16x/HZK16x, use software such as VTEDIT.EXE or TS?.EXE.)
(The new internal code order of NEW is like DF,FF;...;D0,F0;CF,EF;...;C0,E0;BF,BE,...,25,24.)
Run.EXE in DOS or load it in CONFIG.SYS in the form of DEVICE=textfile.EXE,.NEW can make the DOS system boot menu, DOS editor display Chinese characters.
(To make a Chinese character DOS system boot menu, need CONFIGP.MNU/CONMENU.SYS/BOOT.SYS.)
The dot matrix character set of EGA/VGA is stored in bit plane 2 (i.e., display RAM) of the display card. Users can modify the dot matrix character set information through the interface provided by EGA/VGA to load and use the character shapes they like. If a Chinese character is split into two characters and replaced respectively, Chinese characters can be displayed without a Chinese character system.
2007.4.19 V2.00 Modify the new internal code format, command line seam type and character set # setting, add FNT.COM toolbox, and fully unleash the potential of dual character sets to display 220 Chinese characters on the same screen
2007.4.14 V1.10 Correct the chaotic error reporting BUG of Chinese font library processing
2007.4.12 V1.00 Support GBK code Chinese font library, up to 110 non - repeating Chinese characters
[ Last edited by Ben Shi on 2007-4-20 at 06:32 AM ]
VTGBK.com V2.00 is a new member of the VTmagic.com series. It ① supports GBK code simplified and traditional character shapes, facilitating source text editing under the window; ② allows a maximum of 110 non - repeating Chinese characters to be displayed on the same screen, with a larger capacity; ③ the error cause of some CRT/LCD monitors should be insufficient bandwidth (such as the resolution of only 640x400 causing the non - existence of the 9th column), and it cannot support the 8-column/9-column setting of Western characters. So, considering the hardware compatibility of the universal boot disk, VTGBK generates the.EXE version without setting the column width by default (if you want the Chinese character shape display to be perfect, use VTGBK/xxx to generate the seamless version (with; set to be with seams)); ④ this version no longer has many parameters like the VTmagic.com 5.10 version, and it is simple and easy to use. ⑤ Thoughtful design: if the source text is too large (exceeding 110 non - repeating Chinese characters), although VTGBK reports an error showing the 111th Chinese character shape, it still generates the.NEW (truncated)/.EXE file to facilitate checking the specific location. ⑥ Adds seam type and character set number setting. ⑦ Adds the VT font file toolbox, allowing up to 220 Chinese characters to be displayed on the same screen for dual character sets! ! !
Note:
Since more than 64 Chinese characters may be displayed, the usual basic Western characters may be displayed in a messy way. At this time, as long as you type the specific xxx.EXE f at the DOS command line, the normal Western display can be restored.
It is suggested that no more than 64 Chinese characters be set in CONFIG.SYS!
VTmagicGBK.com helps non-Chinese character systems display 110 Chinese characters!
VGA_Text magic only she can do it (GBK version) generates "font.EXE & text.NEW" V2.00 (C)2007.4.19
Design: Luo MingAn Luo Mingan (also known as: Born2be Ben Shi)
===Brief Tutorial===
VTGBK textfile.TXT<Enter> -- Generate.NEW/.EXE
textfile.EXE<Enter> -- Load new font
TYPE textfile.NEW<Enter> -- Browse.NEW new code text
EDIT textfile.NEW<Enter> -- Edit.NEW new code text
textfile.EXE any parameter<Enter> -- Restore original system font
===More Information=== Use FNT.COM to unleash the potential of VT font!
VTGBK textfile
^^0--7=character set 0--7(default 0) 8,9=seamless, with seams(default no setting 8/9)
Generate textfile.NEW & textfile.EXE (need C:\ or.\GBK16 or HZK16).
(To generate Chinese font library GBK16x/HZK16x, use software such as VTEDIT.EXE or TS?.EXE.)
(The new internal code order of NEW is like DF,FF;...;D0,F0;CF,EF;...;C0,E0;BF,BE,...,25,24.)
Run.EXE in DOS or load it in CONFIG.SYS in the form of DEVICE=textfile.EXE,.NEW can make the DOS system boot menu, DOS editor display Chinese characters.
(To make a Chinese character DOS system boot menu, need CONFIGP.MNU/CONMENU.SYS/BOOT.SYS.)
The dot matrix character set of EGA/VGA is stored in bit plane 2 (i.e., display RAM) of the display card. Users can modify the dot matrix character set information through the interface provided by EGA/VGA to load and use the character shapes they like. If a Chinese character is split into two characters and replaced respectively, Chinese characters can be displayed without a Chinese character system.
2007.4.19 V2.00 Modify the new internal code format, command line seam type and character set # setting, add FNT.COM toolbox, and fully unleash the potential of dual character sets to display 220 Chinese characters on the same screen
2007.4.14 V1.10 Correct the chaotic error reporting BUG of Chinese font library processing
2007.4.12 V1.00 Support GBK code Chinese font library, up to 110 non - repeating Chinese characters
[ Last edited by Ben Shi on 2007-4-20 at 06:32 AM ]
Attachments
Demo.rar (7.58 KiB, Downloads: 334) Vtgbk.rar (3.56 KiB, Downloads: 353) Vtfnt.rar (3.48 KiB, Downloads: 293)my major is english----my love is dos----my teacher is the buddha----my friends--how about U
