|
sdbbsdbb
初级用户
积分 97
发帖 43
注册 2006-10-9
状态 离线
|
『第 16 楼』:
使用 LLM 解释/回答一下
Originally posted by freenumen at 2006-12-15 01:11:
实不相瞒，我在做试验的的时候，用MS_DOS做成的启动U盘不能启动我的电脑，
但我用FREEDOS做的启动U盘却能启动我的电脑，不知道大家遇见过这种情况 ...
正常现象啊,优盘启动与四个因素相关:
1/主板(包括BIOS与CHIP)的兼容性
2/优盘的兼容性
3/制作软件
4/启动文件
其中,最核心是第三/四条,好的制作软件可以用一种启动文件几乎所有的优盘,而差的......
我的评价:
1/ FLASHBOOT 85 (USB-ZIP格式制作出的SD卡与数位相机不兼容,大BUG)
2/HPUSBFW 80 (在我的试验机器中无一能用USB-ZIP方式启动,但大多能以USB-HDD格式启动)
3/USBOOT 70 (兼容性很成问题,看在国产软件的份上,打高一点点吧)
4/UFORMAT 60 (尚须努力)
Originally posted by freenumen at 2006-12-15 01:11:
To be honest, when I was doing the test, the bootable USB flash drive made with MS_DOS couldn't boot my computer,
but the bootable USB flash drive made with FREEDOS could boot my computer. I wonder if you guys have encountered this situation...
Normal phenomenon. USB flash drive booting is related to four factors:
1/ Compatibility of the motherboard (including BIOS and CHIP)
2/ Compatibility of the USB flash drive
3/ Making software
4/ Boot files
Among them, the most core are the third and fourth. A good making software can use one kind of boot file to be compatible with almost all USB flash drives, while the bad ones...
My evaluations:
1/ FLASHBOOT 85 (SD cards and digital cameras made with USB-ZIP format are incompatible, major bug)
2/ HPUSBFW 80 (None of the test machines can boot with USB-ZIP method, but most can boot with USB-HDD format)
3/ USBOOT 70 (Compatibility is quite problematic, give a bit higher score for domestic software)
4/ UFORMAT 60 (Still need to work hard)
|
|
 2006-12-15 04:45 |
|
|
lpclimber
初级用户
积分 168
发帖 85
注册 2005-8-26
状态 离线
|
『第 17 楼』:
使用 LLM 解释/回答一下
楼上的朋友看来很专业呀,要好好学习一下,我只用过USBOOT
The friend upstairs seems quite professional. I need to study hard. I've only used USBOOT.
|
|
|
2006-12-15 07:22 |
|
|
squallcn
新手上路
积分 4
发帖 2
注册 2006-11-23
状态 离线
|
『第 18 楼』:
使用 LLM 解释/回答一下
今天试了，所有的电脑都能启动．太爽了．
Today I tried it, and all the computers can boot up. So cool.
|
|
|
2006-12-15 08:08 |
|
|
ypf188
新手上路
积分 7
发帖 10
注册 2006-11-6
状态 离线
|
『第 19 楼』:
使用 LLM 解释/回答一下
我的移动硬盘制作失败
信息如下：
Loading boot sector...
Initializing destination media...
*** Error: Reformatting of target disk required, because it's impossible to match boot sector to filesystem: boot sector load code starts at 0x3e, but filesystem parameters forced the program to generate bootsector that expects load code start at 0x5a.
原因是什么
Last edited by ypf188 on 2006-12-15 at 01:06 PM ]
My external hard drive was failed to be made.
Information as follows:
Loading boot sector...
Initializing destination media...
*** Error: Reformatting of target disk required, because it's impossible to match boot sector to filesystem: boot sector load code starts at 0x3e, but filesystem parameters forced the program to generate bootsector that expects load code start at 0x5a.
What is the reason?
Last edited by ypf188 on 2006-12-15 at 01:06 PM ]
|
|
|
2006-12-16 01:05 |
|
|
szk0008
新手上路
积分 4
发帖 2
注册 2006-12-17
状态 离线
|
『第 20 楼』:
使用 LLM 解释/回答一下
Loading boot sector...
Initializing destination media...
*** Error: Creating VFAT filesystem: Attempting to create a too large file system
加载引导扇区...
初始化目标介质...
*** 错误：创建VFAT文件系统：尝试创建过大的文件系统
|
|
|
2006-12-17 22:31 |
|
|
szk0008
新手上路
积分 4
发帖 2
注册 2006-12-17
状态 离线
|
『第 21 楼』:
支持移动硬盘吗？
使用 LLM 解释/回答一下
支持移动硬盘吗？
Does it support mobile hard drives?
|
|
|
2006-12-18 01:49 |
|
|
sdbbsdbb
初级用户
积分 97
发帖 43
注册 2006-10-9
状态 离线
|
『第 22 楼』:
使用 LLM 解释/回答一下
19.20楼用的是都是FLASHBOOT吧，如果不行的话，那就换HPUSBFW（那可是USB－HDD专用）或USBOOT啊，另外，FLASHBOOT制作启动盘的时候，除了那三个启动文件外，还需要一个SYS文件，否则也无法完成制作。。。（不信的话，你可以准备只含三个启动文件的目录，然后试试）
19.20 floors are all using FLASHBOOT. If it doesn't work, then change to HPUSBFW (which is specifically for USB-HDD) or USBOOT. Also, when making a bootable disk with FLASHBOOT, in addition to those three boot files, a SYS file is also needed; otherwise, the production cannot be completed... (If you don't believe it, you can prepare a directory containing only three boot files and then try it)
|
|
|
2006-12-18 12:03 |
|
|
iCoLa
新手上路
积分 2
发帖 1
注册 2006-10-22
状态 离线
|
|
|
2006-12-19 00:32 |
|
|
wlidan
新手上路
网络幽灵
积分 15
发帖 7
注册 2006-8-29
状态 离线
|
『第 24 楼』:
使用 LLM 解释/回答一下
FLASHBOOT 我还没用过，正准备试用。
其它几个都用过，以前一直用USBOOT，但启动U盘的制作成功率也不高，最近新购的1G U盘Sandisk U3用USBOOT怎么也制作不成功，后换用HPUSBFW2.06,一次成功，现在已将GRUB，XPE，mini98在U盘里安家了。
FLASHBOOT I haven't used it yet, and I'm just about to try it out.
I've used the other several ones. I've been using USBOOT all the time before, but the success rate of making the USB drive bootable is not high. Recently, I bought a new 1G USB drive, Sandisk U3, and USBOOT couldn't make it work at all. Then I switched to HPUSBFW2.06 and it succeeded at once. Now I've installed GRUB, XPE, mini98 on the USB drive.
|
|
|
2006-12-28 11:09 |
|
|
wlidan
新手上路
网络幽灵
积分 15
发帖 7
注册 2006-8-29
状态 离线
|
『第 25 楼』:
使用 LLM 解释/回答一下
FLASHBOOT 我还没用过，正准备试用。
其它几个都用过，以前一直用USBOOT，但启动U盘的制作成功率也不高，最近新购的1G U盘Sandisk U3用USBOOT怎么也制作不成功，后换用HPUSBFW2.06,一次成功，现在已将GRUB，XPE，mini98在U盘里安家了。
FLASHBOOT I haven't used it yet, and I'm just about to try it out.
I've used the other several ones. I used USBOOT all the time before, but the success rate of making bootable USB drives was not high. The newly bought 1G SanDisk U3 USB drive couldn't be made successfully with USBOOT. Later, I switched to HPUSBFW 2.06 and it succeeded at once. Now I've installed GRUB, XPE, and mini98 on the USB drive.
|
|
|
2006-12-28 11:11 |
|
|
gardner
新手上路
积分 2
发帖 1
注册 2006-12-29
状态 离线
|
『第 26 楼』:
我也是这样的
使用 LLM 解释/回答一下
我也是这样的,不过我用USB-HDD模式做成功了.BISO设为USB-ZIP启动成功.另一台机BISO上有USB-HDD,就必须设为USB-HDD,设为USB-ZIP启不来.谢谢楼主~!
I am the same way, but I succeeded with the USB-HDD mode. The BIOS was set to USB-ZIP boot successfully. On another machine, if there is USB-HDD in the BIOS, it must be set to USB-HDD, and it won't boot if set to USB-ZIP. Thanks to the landlord~!
|
|
|
2006-12-29 11:53 |
|
|
psccj
新手上路
积分 2
发帖 1
注册 2005-12-15
状态 离线
|
『第 27 楼』:
使用 LLM 解释/回答一下
我刚买的联想710+(1G)的U盘用楼主的方法没有做成!
The USB flash drive of Lenovo 710+ (1G) I just bought didn't work out using the method of the landlord!
|
|
|
2007-1-9 09:36 |
|
|
xplinlong
初级用户
终极菜鸟
积分 111
发帖 6
注册 2004-7-28
状态 离线
|
『第 28 楼』:
使用 LLM 解释/回答一下
1G的U盘坏了，还在返修中，等回来试一下
The 1G USB flash drive is broken and is still in the repair process. Wait until it comes back and try it.
|
|
|
2007-1-10 12:19 |
|
|
qmd000
新手上路
积分 5
发帖 3
注册 2007-1-24
状态 离线
|
『第 29 楼』:
使用 LLM 解释/回答一下
我的U盘是SanDisk 512M的，用usbboot三种模式下都没能做成启动盘。我也花了很多时间，最终还是没有找到能做成的方法(软件)。尽管现在丢了，但我还是想知道，是不是我这个U盘压根就不支持做启动盘？
My USB flash drive is a SanDisk 512M. I couldn't make it into a bootable drive in the three modes of usbboot. I also spent a lot of time and finally didn't find a way (software) to make it. Although it's lost now, I still want to know if my USB flash drive simply doesn't support making a bootable drive?
|
|
|
2007-1-24 14:21 |
|
|
pacerpacer
新手上路
积分 13
发帖 7
注册 2007-1-26
状态 离线
|
『第 30 楼』:
使用 LLM 解释/回答一下
正在找启动u盘的制作方法
搂住真是雪中送炭啊
感谢！～！～！～！～！
Looking for the method to make a bootable USB drive
Laozhu is really a lifesaver
Thanks!～！～！～！～！
|
|
|
2007-1-26 04:56 |
|
