中国DOS联盟

You can download the qcdrom.sys file here:
http://www.newdisk.cn/?nayn
Thanks to lianjian2004 for the recommendation!
In the future, more and more people will need to find new DOS drivers

It's in the "Tools Network Disk" in the top-left corner of the network disk in my signature, under the "Small Tools" directory. It's really inconvenient that I can't upload attachments here.

Or just find a bootable disk from this forum. As long as it's not too old, it's estimated that most of them have it.

Thanks to the third floor, I found and downloaded gcdrom, but I've been failing all the time, heh heh, I'm still fighting

In the disk image file supporting SATA drives under DOS:

AUTOEXEC.EXE

MSCDEX.EXE /D:MSCD000 /D:MSCD001 /D:MSCD002


CONFIG.SYS

device=himem.sys /testmem:off
DEVICE=GCDROM.SYS /D:MSCD000 /C0
DEVICE=GCDROM.SYS /D:MSCD001 /C1
DEVICE=GCDROM.SYS /D:MSCD002 /C2
files=10
buffers=10
dos=high，umb
stacks=9，256
devicehigh=ramdrive.sys /E 4096
lastdrive=z

It didn't pass, don't know what the problem is, please friends help!

Hehe, the person upstairs, there's an error in the autoexec file!
You don't specify the CD-ROM drive letter and don't perform CD-ROM detection, and you still want to use the CD-ROM?
Try:
MSCDEX.EXE /D:MSCD000 /D:MSCD001 /D:MSCD002 /L:x
Provided that you indeed use mscdex

Originally posted by bc12060101 at 2007-10-3 10:49:
Hey, upstairs, there's an error in the autoexec file!
You don't specify the CD-ROM drive letter and don't perform CD-ROM detection, and you still want to use the CD-ROM?
Try:
MSCDEX.EXE /D:MSCD000 /D:MSCD001 /D:MSCD002 /L:x
The premise is that you did use mscdex

The 5th floor's autoexec already has it? Hehe.

Originally posted by lianjiang2004 at 2007-10-3 12:04:

The autoexec in floor 5 already has it? Hehe.

Hehe, I don't know what the "has it" you mentioned refers to?
Not specifying the CD-ROM drive letter is not too big of a problem, because the system can still assign it by itself. But if there is no mscdex file at all (using shsucdx or others), then the problem is unsolvable.
In addition, in what environment did the landlord test? If it was tested in a virtual machine (VPC), it is natural that it won't pass.

Last edited by bc12060101 on 2007-10-3 at 12:52 PM ]

Not specifying the CD-ROM drive letter is originally okay. Whether to specify the drive letter is purely a personal habit. Of course, not only MSCDEX.EXE, but also if there are references in autoexec.bat and config.sys but you haven't prepared them, it's not okay if any file is missing. Hehe.

My comment is aimed at "Hehe, the person above, there's an error in the autoexec file! You neither specify the CD-ROM drive letter nor perform CD-ROM detection, and you still want to use the CD-ROM? Try: MSCDEX.EXE /D:MSCD000 /D:MSCD001 /D:MSCD002 /L:x". As for "The premise is that you indeed used mscdex", this is not within the scope of "autoexec file error!".

Thanks to friends' attention, unfortunately to tell you, I failed again, I won't burn for now, take a rest, thanks
The above files have all been tried

Last edited by nayn on 2007-10-3 at 04:27 PM ]

Finally solved, using the download package provided by darkradx. Friends in need can download from my network disk:
http://www.newdisk.cn/?nayn
File name: MSDOS

So it turns out that UDVD.SYS replaces gcdrom.sys, and gcdrom.sys has fulfilled its mission, heh. It seems that the drivers in gghost also need to be upgraded.

Yes, I was focusing on gcdrom before the mistake, thanks to lianjian2004 for the help and reminder