|
p1509101
中级用户
海浪人生
积分 206
发帖 103
注册 2007-7-4
状态 离线
|
『楼 主』:
[已解决]如何在已分区的空硬盘上安装DOS+ghost系统,谢谢
使用 LLM 解释/回答一下
如何在已分区的空硬盘上安装DOS+ghost系统,谢谢
补充 可以挂到别的机上当从盘 无光驱 无U盘~~ 因为主板不一样 所以无法对刻~~ 我想挂别的机上装矮人DOS什么的 但是都不能自定义安装到从盘~~
看论坛里面说的 直接复制DOS文件 又不行~~
知道的说一下吧,急~~ 谢谢了
不要说软驱DOS 光盘DOS 因为没有那东西 不然告诉我个 怎么把软驱DOS 光盘DOS 转换方法到硬盘的从盘也可以 谢谢 楼下所有回答的兄弟了 ~~~~~~~~~~
Last edited by p1509101 on 2007-10-31 at 05:51 AM ]
How to install DOS + ghost system on a partitioned empty hard drive, thank you
Supplement: Can be hung on another machine as a slave drive. No CD drive. No USB flash drive~~ Because the motherboards are different, so cannot copy. I want to hang on another machine to install矮人DOS and so on, but cannot customize the installation to the slave drive~~
I saw in the forum that directly copying DOS files doesn't work~~
Those who know, please tell me, urgent~~ Thank you
Don't say floppy disk DOS, CD-ROM DOS, because there is no such thing. Otherwise, tell me a method to convert floppy disk DOS, CD-ROM DOS to the slave drive of the hard drive. Thank you to all the brothers who answered below
Last edited by p1509101 on 2007-10-31 at 05:51 AM ]
|
|
 2007-10-28 23:52 |
|
|
bc12060101
银牌会员
积分 1455
发帖 712
注册 2006-1-20
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
嘿嘿，楼上的，听说过虚拟软驱、grub4dos、或者AVLGOMGR之类的可以将软盘镜像文件载入内存用以引导系统进入dos的东东吗？估计是没有听说过，不要紧，网上go一下就是了。
使用上述工具之一将挂有你的空硬盘的机子引导进入到dos系统中，然后键入 sys x: 回车（这里的x是你的空硬盘的第一个分区在dos下被分配的盘符），这样，你的“空”硬盘就已经装有一个基本的dos系统了。此后，重回windows系统下将ghost.exe以及系统安装用的ghost镜像文件拷贝到你那空硬盘的其他分区上。好了，准备工作算是做完了，现在你就可以将“空”硬盘摘下来装回原机，然后开机引导进入dos使用ghsot安装新系统了。
注意：以上操作中涉及的两个分区必须是fat32格式的，且第一个分区是主分区并已被激活。
Hehe, the person upstairs, have you heard of things like virtual floppy drives, grub4dos, or AVLGOMGR that can load floppy disk image files into memory to boot the system into DOS? Probably not heard of it. It's okay, just go online and search.
Use one of the above tools to boot the computer with your empty hard drive into the DOS system, then type sys x: and press Enter (here x is the drive letter assigned to the first partition of your empty hard drive under DOS), so your "empty" hard drive already has a basic DOS system installed. Then, return to the Windows system and copy ghost.exe and the system installation ghost image file to other partitions of that empty hard drive. Okay, the preparation work is done. Now you can remove the "empty" hard drive, install it back into the original computer, and then boot into DOS using ghost to install the new system.
Note: The two partitions involved in the above operations must be in FAT32 format, and the first partition is a primary partition and has been activated.
|
|
|
2007-10-30 20:41 |
|
|
p1509101
中级用户
海浪人生
积分 206
发帖 103
注册 2007-7-4
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
谢谢 楼上的兄弟 可以了~~~
Thank you, brother upstairs. It's okay~~~
|
|
|
2007-10-31 05:51 |
|
|
bc12060101
银牌会员
积分 1455
发帖 712
注册 2006-1-20
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
嘿嘿，其实更为简单的方法是将空硬盘挂在别的机子上进入dos后直接使用ghost程序将安装系统用的镜像文件恢复到空硬盘的第一个分区上，之后不要重启，退出ghost程序后直接关机，将“空”硬盘摘下来，放回原机重启后继续安装过程就行了。这样操作对于硬盘的分区格式就不再有fat32的要求了。
Heheh, actually a simpler method is to hang the empty hard drive on another machine, enter DOS, then directly use the Ghost program to restore the image file for installing the system to the first partition of the empty hard drive. After that, don't restart, exit the Ghost program, then directly power off, remove the "empty" hard drive, put it back in the original machine, restart, and continue the installation process. This operation no longer requires the partition format of the hard drive to be FAT32.
|
|
|
2007-10-31 07:34 |
|
|
citydream
初级用户
积分 37
发帖 17
注册 2007-11-1
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
Originally posted by bc12060101 at 2007-10-31 07:34 AM:
嘿嘿，其实更为简单的方法是将空硬盘挂在别的机子上进入dos后直接使用ghost程序将安装系统用的镜像文件恢复到空硬盘的第一个分区上，之后不要重 ...
此办法我常用，但是有时从盘不会自动激活，要到磁盘管理中将其激活才行。
This method I often use, but sometimes the slave drive will not activate automatically, and it needs to be activated in Disk Management.
|
|
|
2007-11-2 08:55 |
|
|
CZJang
初级用户
积分 32
发帖 13
注册 2007-4-14
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
Originally posted by p1509101 at 2007-10-31 05:51 AM:
谢谢 楼上的兄弟 可以了~~~
這個問題最筒單的辦法就是 format c: /s
要是裝好系統了，那想再裝個DOS and GHOST 那方法與工具就太多了我最起碼可以想到五種以上的方法。
回復你的這個問題是因為你回復我的問題，我再搜索了仁兄的問題，算是對仁兄的一點回饋吧！呵呵
Originally posted by p1509101 at 2007-10-31 05:51 AM:
Thanks, brother above, it's okay~~~
The simplest way for this problem is format c: /s
If the system is already installed, then if you want to install another DOS and GHOST, there are too many methods and tools. I can think of at least more than five methods. I am replying to your question because you replied to my question, and I searched for the brother's question again, which is a little feedback to the brother! Hehe
|
|
|
2008-5-29 07:17 |
|
