|
wang6610
银牌会员
积分 1246
发帖 488
注册 2003-11-11
状态 离线
|
|
 2008-12-4 11:47 |
|
|
kanny
新手上路
积分 6
发帖 2
注册 2008-11-12
状态 离线
|
『第 17 楼』:
使用 LLM 解释/回答一下
13楼的,请教具体如何做,我试了好多种方法都不能"写".
Person on the 13th floor, please teach me the specific steps. I've tried many methods but can't "write".
|
|
|
2008-12-5 08:58 |
|
|
anue786
初级用户
积分 51
发帖 24
注册 2006-11-11
状态 离线
|
『第 18 楼』:
使用 LLM 解释/回答一下
在EasyBoot制做后。放在虚拟机里启动提示“disk i/o error如何处理啊
After making with EasyBoot. When booting in the virtual machine, it prompts "disk I/O error. How to handle it?
|
|
|
2008-12-6 19:40 |
|
|
xiaoyunwang
高级用户
积分 940
发帖 374
注册 2007-10-17
来自 湖南张家界
状态 离线
|
『第 19 楼』:
使用 LLM 解释/回答一下
Originally posted by kanny at 2008-12-5 08:58 AM:
13楼的,请教具体如何做,我试了好多种方法都不能"写".
你不妨下载现成的软盘镜像，软盘镜像直接进行引导其 A: 是不可写的，可用 Grub 的 map --mem 或 Grub->memdisk 等方式引导，可以参考 Grub4DOS 栏目置顶的 Grub4DOS 教程。
Originally posted by kanny at 2008-12-5 08:58 AM:
Floor 13, please teach me the specific method. I have tried many methods but can't "write".
You may consider downloading ready-made floppy disk images. Floppy disk images are not writable when booted directly from A:. You can use methods like Grub's map --mem or Grub->memdisk to boot, and you can refer to the top-sticked Grub4DOS tutorial in the Grub4DOS section.
|
生命源头 → www.shengmingyt.cn |
|
|
2008-12-7 10:05 |
|
|
xiaoyunwang
高级用户
积分 940
发帖 374
注册 2007-10-17
来自 湖南张家界
状态 离线
|
『第 20 楼』:
使用 LLM 解释/回答一下
Originally posted by anue786 at 2008-12-6 07:40 PM:
在EasyBoot制做后。放在虚拟机里启动提示“disk i/o error如何处理啊
请注意，U 盘版中，我没有放入 IO.SYS 和 Command.com 程序。请检查基本的启动文件是否齐全。
Originally posted by anue786 at 2008-12-6 07:40 PM:
After making with EasyBoot. When booting in the virtual machine, it prompts "disk i/o error. How to handle it?
Please note that in the USB version, I did not put in the IO.SYS and Command.com programs. Please check if the basic boot files are complete.
|
生命源头 → www.shengmingyt.cn |
|
|
2008-12-7 10:09 |
|
|
yellowcd
初级用户
积分 22
发帖 8
注册 2008-11-14
状态 离线
|
『第 21 楼』:
使用 LLM 解释/回答一下
文件解出来后，在DOS下运行PC3000，有启动画面，但是处于死机...一动不能动...
After extracting the file, run PC3000 under DOS. There is a boot screen, but it is in a deadlock... can't move at all...
|
|
|
2008-12-11 15:44 |
|
|
xiaoyunwang
高级用户
积分 940
发帖 374
注册 2007-10-17
来自 湖南张家界
状态 离线
|
『第 22 楼』:
使用 LLM 解释/回答一下
Originally posted by yellowcd at 2008-12-11 03:44 PM:
文件解出来后，在DOS下运行PC3000，有启动画面，但是处于死机...一动不能动...
请仔细检查一下，我打包的精简版镜像，就是从这个内面提取的中文驱动，虚拟机下未出现死机现象，要不然就不会有首页的中文截图了。请自行加入 MS-DOS 的 IO.SYS 和 COMMAND.COM 及修改相关的 MSDOS.SYS ，CONFIG.SYS 的默认设置值，且一定 不要加载任何汉字系统。另外，用 PC3000 进行修复 IDE 硬盘最好挂接在老主板上(最好是带 ISA 插槽的那种)，具体怎么用，附带的有 10 MB 之多的教程...
Last edited by xiaoyunwang on 2008-12-13 at 15:04 ]
Originally posted by yellowcd at 2008-12-11 03:44 PM:
After extracting the files, run PC3000 under DOS. There is a boot screen, but it is in a deadlock... cannot move at all...
Please carefully check the streamlined image I packaged, which is the Chinese driver extracted from this. There is no deadlock phenomenon in the virtual machine; otherwise, there would not be the Chinese screenshots on the homepage. Please add IO.SYS and COMMAND.COM of MS-DOS by yourself and modify the default settings of related MSDOS.SYS and CONFIG.SYS, and do not load any Chinese system. In addition, it is best to connect the IDE hard disk for repair with PC3000 to an old motherboard (preferably one with an ISA slot). Specifically how to use it, there are tutorials of up to 10 MB attached...
Last edited by xiaoyunwang on 2008-12-13 at 15:04 ]
|
生命源头 → www.shengmingyt.cn |
|
|
2008-12-13 14:56 |
|
|
zclzj
新手上路
积分 6
发帖 3
注册 2008-12-27
状态 离线
|
『第 23 楼』:
使用 LLM 解释/回答一下
出现disk I/O error怎么回事
What's the matter when disk I/O error occurs
|
|
|
2009-1-8 19:12 |
|
|
xiaoyunwang
高级用户
积分 940
发帖 374
注册 2007-10-17
来自 湖南张家界
状态 离线
|
『第 24 楼』:
使用 LLM 解释/回答一下
Originally posted by zclzj at 2009-1-8 07:12 PM:
出现disk I/O error怎么回事
如果实在不行,下载下面签名处的软体光盘,7:00之前下载快一点,用UltroISO提取隐藏的ezboot下的精简版pc3000.gz压缩包,再解压后用winimage提取所有的文件,结合上述完整的PC3000 U盘版对比着相互替换文件看问题出现在那里.
Originally posted by zclzj at 2009-1-8 07:12 PM:
What's the matter with disk I/O error
If it really doesn't work, download the software disc in the signature below. Download it faster before 7:00. Extract the hidden streamlined pc3000.gz compressed package under ezboot with UltroISO, then decompress it and use winimage to extract all files. Compare and replace files with the above complete PC3000 USB version to see where the problem is.
|
生命源头 → www.shengmingyt.cn |
|
|
2009-1-9 13:08 |
|
|
DJ131452DJ
初级用户
积分 50
发帖 44
注册 2008-12-7
状态 离线
|
|
|
2009-1-23 01:42 |
|
|
szhdqwc
新手上路
积分 11
发帖 4
注册 2008-3-23
状态 离线
|
『第 26 楼』:
使用 LLM 解释/回答一下
我准备试一试看看好用否，反正是好东西先收藏了再说。谢谢提供资料！！！
Last edited by szhdqwc on 2009-2-6 at 19:07 ]
I'm going to try it and see if it works. Anyway, it's a good thing, so I'll bookmark it first. Thanks for providing the materials!!!
Last edited by szhdqwc on 2009-2-6 at 19:07 ]
|
|
|
2009-2-6 19:06 |
|
|
szhdqwc
新手上路
积分 11
发帖 4
注册 2008-3-23
状态 离线
|
『第 27 楼』:
请问楼主：
使用 LLM 解释/回答一下
是不是只要把下再的PC3KV14(1)软件解压到硬盘就可以用了？还有没有其它步骤？
Is it just that you need to extract the downloaded PC3KV14(1) software to the hard drive to use it? Are there any other steps?
|
|
|
2009-2-19 11:42 |
|
|
liangqi
初级用户
积分 135
发帖 12
注册 2003-7-18
状态 离线
|
『第 28 楼』:
使用 LLM 解释/回答一下
我下载了，其实用不了那么多的文件，好多已经没有用处了，
针对目前硬盘常用的，不会多于20个文件。过几天我删除以后发表，
近来身体不好，请各位网友谅解。
I downloaded it. Actually, there are not so many files that are useful. Many are already useless. For the commonly used hard disks currently, there won't be more than 20 files. I'll delete them later and post them. Recently, I've been in poor health. Please forgive me, netizens.
|
|
|
2009-2-26 01:59 |
|
|
lyxxzrb
新手上路
积分 12
发帖 6
注册 2009-4-8
状态 离线
|
『第 29 楼』:
使用 LLM 解释/回答一下
谢谢楼主费心分享!
Thanks to the LZ for taking the trouble to share!
|
|
|
2009-4-9 04:05 |
|
|
renchmin
新手上路
积分 16
发帖 9
注册 2009-5-26
状态 离线
|
『第 30 楼』:
使用 LLM 解释/回答一下
大名鼎鼎的俄罗斯的硬盘修复软件，收藏起来吧。
The famous Russian hard drive repair software, collect it.
|
|
|
2009-5-28 03:26 |
|
