『第 17 楼』:
★★★大容量U盘做启动盘已彻底解决方法★★★
使用 LLM 解释/回答一下
下面我给大家介绍一下要怎么做吧!
准备USBOOT 1.7， 用USBoot v1.7启动U盘制作工具，将你的U盘制作成 USB-HDD 的DOS启动型，注意选
择《工作模式》时，一定要选择HDD模式，按照工具的提示即可制作成功。下载USB-HDD-WinPE.rar压缩 (这个做了之后带有 winpe系统)
包，把里面的文件释放到U盘的根目录下，注意是根目录！
U盘启动盘的使用：
将U盘插入USB口（最好将其他的USB设备暂时拔掉），重启电脑，在系统自检的界面上按Del键进
入BIOS设置，
进入BIOS FEATURES SETUP中，将Boot Sequence（启动顺序）设定为USB-HDD第一。设定好后按ESC一下，
退回BIOS主界面，选择Save and Exit回车确认退出BIOS设置。电脑重启后就会出现主菜单。
如果你的主板只能采用ZIP模式启动，则按下面的方法操作。
用USBoot v1.68启动U盘制作工具，将你的U盘制作成 USB-ZIP 的DOS启动型。下载USB-HDD-WinPE.rar压
缩包，把里面的文件释放到U盘的根目录下，然后将ZIP模式文件夹内的AUTOEXEC.BAT和MENU.LST两个文
件替换根目录下的同名文件。
将U盘插入USB口，重启电脑，进入BIOS FEATURES SETUP中，将Boot Sequence（启动顺序）设定
为USB-ZIP第一。电脑重启后就会出现主菜单。
Now I'll introduce to you how to do it!
Prepare USBOOT 1.7. Use the USBoot v1.7 USB flash drive making tool to make your USB flash drive into a USB-HDD DOS bootable type. Note that when selecting the "Work Mode", you must choose the HDD mode, and it can be successfully made according to the tool's prompts. Download the USB-HDD-WinPE.rar compressed package (this will have a winpe system after doing this), and extract the files inside to the root directory of the USB flash drive. Note it's the root directory!
Use of the USB flash drive boot disk:
Insert the USB flash drive into the USB port (it's best to temporarily unplug other USB devices), restart the computer, and press the Del key to enter the BIOS setup at the system self-test interface.
Enter BIOS FEATURES SETUP, set Boot Sequence (boot order) to USB-HDD first. After setting, press ESC once, return to the BIOS main interface, select Save and Exit and press Enter to confirm and exit the BIOS setup. After the computer restarts, the main menu will appear.
If your motherboard can only boot in ZIP mode, operate as follows.
Use the USBoot v1.68 USB flash drive making tool to make your USB flash drive into a USB-ZIP DOS bootable type. Download the USB-HDD-WinPE.rar compressed package, extract the files inside to the root directory of the USB flash drive, and then replace the AUTOEXEC.BAT and MENU.LST two files in the ZIP mode folder with the same-named files in the root directory.
Insert the USB flash drive into the USB port, restart the computer, enter BIOS FEATURES SETUP, set Boot Sequence (boot order) to USB-ZIP first. After the computer restarts, the main menu will appear.
|
