|
firstsail
高级用户
   
积分 668
发帖 295
注册 2005-7-26 来自 广东深圳
状态 离线
|
『第 196 楼』:
使用 LLM 解释/回答一下
1:为了获得纯DOS,一般可以安装DOS6.22或DOS7.0.由于Win2000、WinXP、WinVesta不完全支持DOS,建议安装第二个操作系统----Win98系统来获得DOS7.0。
2:由于许许多多在WinXP下增加安装的纯DOS,基本上启动后,自动安装了中文系统,浪费了大量的常规内存,建议安装第二个操作系统----Win98系统来获得DOS7.0。
3:如果在Windows2000、WinXP下运行,请将Sail30000目录下的Config.Sys文件的“Boot”段的“XmsStyle”键盘配置为“1”,用磁盘仿真扩展内存。如果在纯DOS、Win9X下运行,可以将Sail30000目录下的Config.Sys文件的“Boot”段的“XmsStyle”键盘配置为“0”,直接使用扩展内存。
4:查看内存,请在DOS命令行下敲入“mem/c”命令查看。
C:\Config.Sys请如下配置(如果是DOS6.22,请将Windows改为DOS)
Device=C:\Windows\Himem.Sys/TestMem:Off
Device=C:\Windows\Emm386.Exe noems novcip
DOS=High,Umb
Stacks=9,256
Files=30
C:\Autoexec.Bat请如下配置(如果是DOS6.22,请将Windows改为DOS)
path C:\Windows;C:\Windows\Command;C:\Bc31\Bin
Lh SmartDrv.Exe
Last edited by firstsail on 2007-8-27 at 10:21 AM ]
1: To obtain pure DOS, generally, you can install DOS 6.22 or DOS 7.0. Since Win 2000, Win XP, and Win Vesta do not fully support DOS, it is recommended to install a second operating system - Win 98 system to obtain DOS 7.0.
2: Because a large number of pure DOS installed additionally under Win XP basically automatically install the Chinese system after startup, which wastes a lot of conventional memory. It is recommended to install a second operating system - Win 98 system to obtain DOS 7.0.
3: If running under Windows 2000 or Win XP, configure the "XmsStyle" keyboard configuration in the "Boot" section of the Config.Sys file in the Sail30000 directory to "1" and use disk emulation to expand memory. If running under pure DOS or Win 9X, configure the "XmsStyle" keyboard configuration in the "Boot" section of the Config.Sys file in the Sail30000 directory to "0" and directly use expanded memory.
4: To check memory, type the "mem/c" command at the DOS command line.
The C:\Config.Sys should be configured as follows (if it is DOS 6.22, change Windows to DOS)
Device=C:\Windows\Himem.Sys/TestMem:Off
Device=C:\Windows\Emm386.Exe noems novcip
DOS=High,Umb
Stacks=9,256
Files=30
The C:\Autoexec.Bat should be configured as follows (if it is DOS 6.22, change Windows to DOS)
path C:\Windows;C:\Windows\Command;C:\Bc31\Bin
Lh SmartDrv.Exe
Last edited by firstsail on 2007-8-27 at 10:21 AM ]
|
|
2007-8-27 10:17 |
|
|
langhuan1
新手上路

积分 18
发帖 10
注册 2007-1-29
状态 离线
|
『第 197 楼』:
使用 LLM 解释/回答一下
完整的
“库文件”、“头文件”“说明书”和“源代码”可在"www.FirstSail.B2B.Cn中下载得到
地址无效啊
Complete "library files", "header files", "instructions" and "source code" can be downloaded from "www.FirstSail.B2B.Cn". The address is invalid.
|
|
2007-8-27 15:48 |
|
|
firstsail
高级用户
   
积分 668
发帖 295
注册 2005-7-26 来自 广东深圳
状态 离线
|
|
2007-8-27 19:30 |
|
|
fcgboy
新手上路

积分 8
发帖 3
注册 2007-8-21
状态 离线
|
『第 199 楼』:
firstsail在不在???
使用 LLM 解释/回答一下
在的话留下联系方式呀
QQ或email什么的 好多东西需要请教
If you are here, leave contact information, such as QQ or email. There are many things to ask for advice.
|
|
2007-8-27 21:36 |
|
|
firstsail
高级用户
   
积分 668
发帖 295
注册 2005-7-26 来自 广东深圳
状态 离线
|
『第 200 楼』:
使用 LLM 解释/回答一下
(1)在某些386的PC104中,可能outtextxy函数无法显示8*8的字库,现WinSail修改了OutTextXY函数,让它能显示8*8字库。
(2)为配合(1)条,字库随着也增加了8*8的字模。
请到下面的地址下载:
http://www.firstsail.com.cn/software.html
(1) In some 386 PC104s, the outtextxy function may fail to display 8*8 font libraries. Now WinSail has modified the OutTextXY function to enable it to display 8*8 font libraries.
(2) To cooperate with item (1), the font library has also added 8*8 font patterns.
Please download at the following address:
http://www.firstsail.com.cn/software.html
|
|
2007-9-9 17:56 |
|
|
THREEKS
初级用户
 
积分 50
发帖 21
注册 2007-4-19
状态 离线
|
『第 201 楼』:
使用 LLM 解释/回答一下
已经不提供源码下载了吗?
Is the source code no longer provided for download?
|
|
2007-9-9 19:09 |
|
|
qunce
初级用户
 
积分 31
发帖 13
注册 2007-9-9
状态 离线
|
『第 202 楼』:
使用 LLM 解释/回答一下
很不错的东西,楼主是高手.DOS下运行的图形界面,连这种东西都自己开发!
不过你的网站设计的太差了,严重建议请我将你们的标志改一改.
It's a very good thing. The owner of the post is a master. A graphical interface running under DOS, and you even developed such a thing by yourself! But the design of your website is too bad. I strongly suggest that you ask me to change your logo.
|
|
2007-9-9 22:48 |
|
|
firstsail
高级用户
   
积分 668
发帖 295
注册 2005-7-26 来自 广东深圳
状态 离线
|
『第 203 楼』:
使用 LLM 解释/回答一下
to qunce:
多谢您的建议!
to qunce:
Thanks for your suggestion!
|
|
2007-9-20 12:21 |
|
|
zqlcch
初级用户
 
积分 178
发帖 85
注册 2006-7-6
状态 离线
|
『第 204 楼』:
使用 LLM 解释/回答一下
很早就用过了,确实是非常不错的GUI库,功能和方便性上比BBS中的另一个GUI库ECURB 2006强,
但发现一个BUG:按DELETE键是删除一整行的内容,而不是删除一个字符。
另外不算BUG吧:界面比较不好看,比QBWIN和ecurb差,所以一些小GUI程序还是选择了QBWIN。。。。。。不过这是仁者见仁,智者见智的事情了,每个人眼光不同。
I used it a long time ago, and it's really a very good GUI library. In terms of functionality and convenience, it is better than another GUI library ECURB 2006 in BBS.
But a BUG was found: pressing the DELETE key deletes the entire line of content instead of deleting a single character.
Also, it's not really a bug: the interface is not very good-looking, worse than QBWIN and ecurb, so some small GUI programs still choose QBWIN... Well, this is a matter of仁者见仁,智者见智, everyone has different tastes.
|
|
2007-9-20 16:01 |
|
|
firstsail
高级用户
   
积分 668
发帖 295
注册 2005-7-26 来自 广东深圳
状态 离线
|
『第 205 楼』:
使用 LLM 解释/回答一下
to Zqlcch
(1)WinSail设计之初,按“Del”就是删除编辑框的所有字符,编辑框的数据全部重新输入有利于减少工业现场的误操作!
并且Windows操作系统的“Backspace”按键和“Del”按键在编辑框中的分工不是很明显,有浪费按键的嫌疑。
(2)关于WinSail的GUI,图形主要是模访Win98,字库采用16X16的中文字库、8X8英文字库。在2006年9月份之前GUI界面
确实比较差强人意。但在那之后,WinSail做了比较大的界面控件的更新,用Windows附件中的“放大镜”程序将Windows控件
放大后,一点一线的模仿过来的,现在WinSail支持了中文输入法,这应该感谢“profree”会员发来的“芝加哥9”程序。
(3)dos下的GUI主要是用“点阵”字库,Windows是用“矢量”或“TrueType”字库,所以界面要超越Windows可以说很难做到,
更大胆一点说,超越的可能性几乎不可能! 我们能做的就是尽量接近“微软”,超越“微软”不是我们这一代人的责任!
(4)WinSail下载地址已经改为“ http://www.firstsail.com.cn/software.html”了
在这里,应该好好感谢“Zqlcch”,因为您提出了不少实用性的建议。
to Zqlcch
(1) When WinSail was initially designed, pressing "Del" would delete all characters in the edit box. Re - entering all data in the edit box is beneficial for reducing misoperations in industrial sites! Moreover, the division of labor between the "Backspace" key and the "Del" key in the edit box of the Windows operating system is not very clear, which seems to be a waste of keys.
(2) Regarding the GUI of WinSail, the graphics mainly imitate Windows 98, and the font library uses a 16X16 Chinese font library and an 8X8 English font library. Before September 2006, the GUI interface was indeed rather unimpressive. But after that, WinSail made relatively large updates to the interface controls. It imitated Windows controls point by point after magnifying them with the "Magnifier" program in Windows accessories. Now WinSail supports Chinese input methods, and this should be thanked to member "profree" for sending the "Chicago 9" program.
(3) The GUI under DOS mainly uses "dot - matrix" font libraries, while Windows uses "vector" or "TrueType" font libraries. So it is very difficult to say that the interface can surpass Windows, and to be more bold, the possibility of surpassing is almost impossible! What we can do is to try to be as close as possible to "Microsoft", and surpassing "Microsoft" is not the responsibility of our generation!
(4) The download address of WinSail has been changed to " http://www.firstsail.com.cn/software.html".
Here, we should properly thank "Zqlcch" because you put forward many practical suggestions.
|
|
2007-9-20 17:32 |
|
|
zh1234
新手上路

积分 5
发帖 3
注册 2007-9-23
状态 离线
|
|
2007-9-23 23:00 |
|
|
firstsail
高级用户
   
积分 668
发帖 295
注册 2005-7-26 来自 广东深圳
状态 离线
|
『第 207 楼』:
使用 LLM 解释/回答一下
to Zh1234
登录"http://www.firstsail.com.cn/software.html"网页可下载WinSail V2.0
to Zh1234
You can download WinSail V2.0 by logging in to the webpage "http://www.firstsail.com.cn/software.html"
|
|
2007-9-24 18:38 |
|
|
huangxiaohao
初级用户
 
积分 29
发帖 15
注册 2007-10-6
状态 离线
|
『第 208 楼』:
使用 LLM 解释/回答一下
看着到是还不错啦
It does look pretty good, actually.
|
|
2007-10-6 22:55 |
|
|
windowsvesta
初级用户
 
积分 138
发帖 67
注册 2007-7-4 来自 云南
状态 离线
|
『第 209 楼』:
发现一个严重的BUG!
使用 LLM 解释/回答一下
发现一个严重的BUG!
多行编辑框CMultiEdit类输入的内容在没有“回车换行”前,GetWindowText()函数返回的字符串恒为“空”,“回车换行”后,GetWindowText()函数才能返回正确的字符串!
Last edited by windowsvesta on 2007-10-17 at 04:27 PM ]
Found a serious BUG!
The content entered by the CMultiEdit class of the multi-line edit box is always an "empty" string returned by the GetWindowText() function before there is a "carriage return and line feed". Only after there is a "carriage return and line feed" can the GetWindowText() function return the correct string!
Last edited by windowsvesta on 2007-10-17 at 04:27 PM ]
|
|
2007-10-17 16:26 |
|
|
firstsail
高级用户
   
积分 668
发帖 295
注册 2005-7-26 来自 广东深圳
状态 离线
|
|
2007-11-15 13:51 |
|