|
ilbgh11
初级用户
 
积分 60
发帖 21
注册 2008-7-17
状态 离线
|
『楼 主』:
USB 2.0设备插入了USB 1.1接口,DOS能正常识别设备吗?
使用 LLM 解释/回答一下
我的那台老机上的USB是1.1的,但我手头上的USB设备都是2.0的。
我曾用USBASPI.SYS和DI1000DD(mhairrudos)驱动USB,插着U盘开机,提示没找到USB设备。
如题,出现该问题时,WINDOWS会弹出一个气球,说高速USB设备的性能会受到影响,但还能正常使用,只是速度慢而已。
那台老机不能上网,所以我需要用U盘运输一些文件,尤其是大文件,我不可能用软盘装。我要在DOS下解决这个问题,请问该怎么办?
The USB on my old machine is 1.1, but the USB devices I have at hand are all 2.0.
I once used USBASPI.SYS and DI1000DD (mhairrudos) to drive USB. When I plugged in the USB flash drive and powered on, it prompted that no USB device was found.
As the title says, when this problem occurs, WINDOWS will pop up a balloon saying that the performance of the high-speed USB device will be affected, but it can still be used normally, just at a slow speed.
That old machine can't access the Internet, so I need to transport some files, especially large files, with a USB flash drive. I can't use floppy disks. I need to solve this problem under DOS. How should I do it?
|
|
2009-4-26 06:22 |
|
|
Climbing
铂金会员
       网络独行侠
积分 6962
发帖 2753
注册 2003-4-16 来自 河北保定
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
在DOS下能否识别U盘,很多时候都是一个运气问题,你所能做的就是试遍所有工具,看哪个能够在DOS下驱动起你的U盘,如果一个也不能,只能怪你自己运气差。
既然这个老机可以使用Windows,你为什么不在windows下运送文件?虽然在Windows下速度仍然很慢,但至少可以识别和访问。
Whether a USB flash drive can be recognized under DOS is often a matter of luck. All you can do is try all kinds of tools to see which one can drive your USB flash drive under DOS. If none can, you can only blame your bad luck.
Since this old computer can use Windows, why don't you transfer files under Windows? Although the speed is still slow under Windows, at least it can be recognized and accessed.
|

偶只喜欢回答那些标题和描述都很清晰的帖子!
如想解决问题,请认真学习“这个帖子”和“这个帖子”并努力遵守,如果可能,请告诉更多的人!
|
|
2009-4-27 19:34 |
|
|
ilbgh11
初级用户
 
积分 60
发帖 21
注册 2008-7-17
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
我想用WINDOWS/DOS双系统的啊,可是装了WINDOWS后我老爸老妈就不会让我再装DOS了,说都有先进的了还用那些落后的干吗。要学编程直接学先进的!他们根本不知道学习过程中的那些细节!我要使用DJGPP,而DJGPP那些文件一共有30多M(没有其他的附加工具),这可不是几个软盘就能解决的!
WINDOWS下的编程我又不是不会,用VISUAL C再点点鼠标不就写出了一个程序的吗?可是那根本不能练出真本事,而且会阻碍我转向LINUX的步伐。
I want to use a Windows/DOS dual system. But after installing Windows, my parents won't let me install DOS again, saying why use those outdated ones when there are advanced ones. If you want to learn programming, just learn the advanced ones directly! They根本 don't know the details in the learning process! I want to use DJGPP, and those DJGPP files are more than 30M in total (without other additional tools), which can't be solved with a few floppy disks!
I'm not incapable of programming under Windows. Writing a program with Visual C by just clicking the mouse is okay. But that can't really train real skills, and it will hinder my pace to switch to Linux.
|
|
2009-4-30 08:28 |
|
|
Jneny
高级用户
    中國DOS聯盟常任參議员
积分 686
发帖 318
注册 2005-11-4
状态 离线
|
|
2009-4-30 09:03 |
|
|
netwinxp
高级用户
   
积分 741
发帖 366
注册 2007-7-25
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
Originally posted by ilbgh11 at 2009-4-30 08:28:
我想用WINDOWS/DOS双系统的啊,可是装了WINDOWS后我老爸老妈就不会让我再装DOS了,说都有先进的了还用那些落后的干吗。要学编程直接学先进的!他们根 ...
如果你仅仅是为了学习,你可以把DOS装到虚拟机里面。
Originally posted by ilbgh11 at 2009-4-30 08:28:
I want to use a Windows/DOS dual system, but after installing Windows, my parents won't let me install DOS again, saying that since there are advanced ones, why use those outdated ones. If you want to learn programming, just learn the advanced ones directly! They are ...
If you are only for learning, you can install DOS in a virtual machine.
|
|
2009-5-2 11:15 |
|
|
ilbgh11
初级用户
 
积分 60
发帖 21
注册 2008-7-17
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
Originally posted by netwinxp at 2009-5-2 11:15:
如果你仅仅是为了学习,你可以把DOS装到虚拟机里面。
我试过用虚拟机,但是安装不了汉字系统,说不支持当前显卡型号。
Originally posted by netwinxp at 2009-5-2 11:15:
If you are just for learning, you can install DOS in a virtual machine.
I tried using a virtual machine, but I couldn't install the Chinese character system. It said it didn't support the current graphics card model.
|
|
2009-5-8 08:35 |
|
|
netwinxp
高级用户
   
积分 741
发帖 366
注册 2007-7-25
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
你的汉字系统是什么?
VPC虚拟机虚拟的显卡好像是S3 325
实在不行就在汉字系统把显卡设置成VGA。
What is your Chinese character system? The video card virtualized by the VPC virtual machine seems to be S3 325. If it doesn't work, just set the video card to VGA in the Chinese character system.
|
|
2009-5-8 23:42 |
|
|
gmy
版主
        操作系统爱好者
积分 1113
发帖 392
注册 2002-11-11
状态 离线
|
『第 8 楼』:
使用 LLM 解释/回答一下
一键GHOST 09版,可以细分USB1.1和2.0 (MS-DOS二级菜单)
One-key GHOST version 09 can distinguish between USB 1.1 and 2.0 (MS-DOS secondary menu)
|

DOS之家 http://doshome.com 站长 葛明阳 |
|
2009-5-12 23:21 |
|