|
ABCDE12345
新手上路

积分 16
发帖 7
注册 2009-4-14 来自 江苏无锡
状态 离线
|
『楼 主』:
为何DOS启动盘只能检测到E盘
使用 LLM 解释/回答一下
向各位大侠请教,我的硬盘有四个分区C、D、E、F,但用了DOS起动盘后只能看到D盘菜单内容,,可我的格式是FAT类的,LASTDRIVE=Z。但再看E盘内容就是光盘信息了,不知何故,请各位指教。
Asking all the experts for help. My hard disk has four partitions: C, D, E, F, but after booting with a DOS boot disk, I can only see the menu content of drive D. However, my format is of the FAT type, and LASTDRIVE=Z is set. But then looking at the content of drive E is the information of the CD - ROM. I don't know why. Please give me some advice.
|
|
2009-4-16 21:24 |
|
|
jumbogun
初级用户
 
积分 36
发帖 16
注册 2009-2-27
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
同问:
在双系统(C盘:WinXP和D盘:DOS7.1)的DOS下以DOS4USB接U盘,结果也是显示为E:盘,进入E:盘也是光盘.
请大侠们指教.谢谢了!
Same question:
Under DOS of dual system (C drive: WinXP and D drive: DOS7.1), when using DOS4USB to connect to the USB flash drive, the result is also displayed as drive E:, and entering drive E: is also a CD.
Please experts give guidance. Thanks!
|
|
2009-4-19 18:03 |
|
|
ABCDE12345
新手上路

积分 16
发帖 7
注册 2009-4-14 来自 江苏无锡
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
我的这一问题不知是什么原因,实在不清楚在哪有错,我和二楼有同病哇
I don't know what the reason is for my this problem. I really don't know where there is a mistake. I have the same problem as the second floor.
|
|
2009-4-20 04:59 |
|
|
bc12060101
银牌会员
    
积分 1455
发帖 712
注册 2006-1-20
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
嘿嘿,楼上的两位,如果不能详细的描述你们自己的问题,未必会有人愿意来猜测你们的问题所在。
偶倒是想帮你们来着,但偶实在是猜不透你们所说的是什么,或许是偶的语文没学好吧
Hehe, the two upstairs, if you can't describe your own problem in detail, maybe no one will be willing to guess what your problem is. I really want to help you, but I really can't guess what you're talking about. Maybe I didn't study Chinese well.
|
|
2009-4-20 06:53 |
|
|
jumbogun
初级用户
 
积分 36
发帖 16
注册 2009-2-27
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
楼上这位先生,先谢谢您的好心。
我有二台现役老机器,DOS_6.22的系统;另有二台备用老机器(使用老机器就得这样,工作性质使然,不得已啊),其中一台换了DOS_7.1;还加了块硬盘装上了XP,算是双启动,运转正常。现在要从一台现役的机器中倒一个1.09G的文件到备用的机器上去。两机器之间只有3.5吋的软盘可用。这不要命吗?!幸好,几台机器上都有USB的插口。于是搞了个USB插口的外接硬盘盒。到这DOS大本营来找驱动来了。结果,上穷碧落下黄泉,能试的几乎全试了,连Wengier站长的超级启动盘也启动过了(那个贴的三十几页跟贴都看了一遍。)。只有本室中的一个包包:DOS4USB有那么点意思,我的一个Maxtor 71084A盘接入成功,能读能写。可惜的是这个盘只有1083MB,就比那该死的目标文件小那么一点点。 因为手上还有一块Maxtor 91366U4,13613MB,于是就接了上去,结果出错。我怀疑是授受二台机器太老太小,没见过这么"大"的硬盘,所以犯晕。便拿到那台双系统机器上去接,DOS4USB里面的loadusb.exe运转倒是顺利,结束时,告诉我USB的盘符是E:。对啊,咱不是双系统吗?C:上是XP;D:上的是DOS;这USB顺着叫个E:挺对啊,赶紧进去看看吧。一进去才发现不对,让喂个碟,怎么和在光盘驱动器里一个意思呢?倒腾了几个来回,试试F:,试试G:,还是一个毛病。没法子,只好再上网来求人了。这位大哥,千万别嫌罗嗦,帮帮忙吧!
谢谢!谢谢了!
Last edited by jumbogun on 2009-4-20 at 04:41 ]
Mr. upstairs, first of all, thank you for your kindness.
I have two active old machines with DOS_6.22 system; there are also two backup old machines (you have to be like this when using old machines, it's due to the nature of the work, there's no way around it), one of which has been changed to DOS_7.1; and a hard disk has been added to install XP, which is a dual boot, running normally. Now I need to transfer a 1.09G file from an active machine to a backup machine. There are only 3.5-inch floppy disks available between the two machines. Isn't this要命? Fortunately, there are USB ports on several machines. So I got a USB port external hard drive enclosure. Came to this DOS base camp to find drivers. As a result, I searched everywhere, almost tried everything, and even booted the super boot disk of站长 Wengier (I read all thirty-some pages of the posts). Only one package in this room: DOS4USB is a bit interesting, and my Maxtor 71084A disk was successfully connected, readable and writable. Unfortunately, this disk is only 1083MB, just a little smaller than that damn target file. Because I still have a Maxtor 91366U4, 13613MB, so I connected it, and then an error occurred. I suspect that the two machines are too old and too small, and have never seen such a "large" hard disk, so they are confused. Then I took it to that dual-system machine to connect. The loadusb.exe in DOS4USB ran smoothly, and at the end, it told me that the USB drive letter is E:. Yes, we have a dual system; C: is XP; D: is DOS; this USB is called E: in sequence, which is quite right, hurry in to have a look. As soon as I went in, I found something was wrong, it asked to insert a disc, how is it the same meaning as in the optical drive? Tinkered back and forth, tried F:, tried G:, still the same problem. There's no way, so I have to come online to ask for help again. Brother, don't dislike the wordiness, help me!
Thank you! Thank you!
Last edited by jumbogun on 2009-4-20 at 04:41 ]
|
|
2009-4-20 19:38 |
|
|
bc12060101
银牌会员
    
积分 1455
发帖 712
注册 2006-1-20
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
嘿嘿,楼上的仁兄,先谢谢你的详细介绍。说的很清楚了!
偶以为在dos下使用usb设备,出任何问题都不应该被认为失常的。因为dos原本就不是用来为usb设备服务的。
既然你的目的是转移文件,且手中也有能够被识别的Maxtor 71084A盘,我想:让dos来处理usb设备,实在是太难为他老人家了。何不使用pe呢?硬盘对考也不能说很麻烦吧。
当然,从试验探究的角度出发,倒好像有得玩了。君不见到目前为止,尚无在dos下“通杀”usb设备的报告。
Hehe, brother upstairs, first of all, thank you for the detailed introduction. It's very clear!
I think that when using USB devices under DOS, any problems should not be considered abnormal. Because DOS was originally not designed to serve USB devices.
Since your purpose is to transfer files and you also have a recognizable Maxtor 71084A disk, I think: it's really too difficult for DOS to handle USB devices. Why not use PE? Disk cloning is not too troublesome, right?
Of course, from the perspective of experimental exploration, it does seem like there's something to play with. Don't you see that so far, there are no reports of "universally compatible" USB devices under DOS.
|
|
2009-4-21 00:27 |
|
|
jumbogun
初级用户
 
积分 36
发帖 16
注册 2009-2-27
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
谢谢楼上的大哥:))
说出来不怕你笑话,我还真不知道什么是PE,当然更不知道怎么玩了.刚才查了一下摆渡,有这么一段好象接近一点:
******PE就是预安装环境.能用来做什么就看你怎么做了,想用来干什么!
直白说就是PE可以做到直接用光盘甚至U盘启动一个windows系统,一个windows的子系统,本人主要是用来做维护,可以做到DOS下做不到的维护,PE可以在没有硬盘的情况下启动一个MINI windows,你可以自己定制,能访问局域网,能拨号上网,能在系统损坏连安全模式都不能进入的情况下修改系统文件,和注册表,类似的工具还有ERD,和微软的嵌入式系统等.微软的预安装系统是需要授权的,可以用国外一个大侠做的BARt's PE生成,用的是NU2的菜单,红叶的就是这种.还可以用bart's PE+XPE插件做一个仿真XP的PE.
所有功能你都可以自己定制!************
看了以后还是"莫宰羊",不得其门而入.而且我的是真正的"纯"DOS,完全没有Window什么事.
这位大哥能否教教,在下对这PE确实是一片空白.到处查,一个个试,实在是太费时间了.不管怎样,再次感谢您的好意回复,虽未马上解决问题,已让我知道不必再浪费时间了.已托人帮忙找1.5G的Maxtor盘去了.这也许可以.真的谢谢你的回贴!
Thanks to the elder brother upstairs:))
To be honest, I don't even know what PE is, let alone how to play with it. Just now I checked Baidu, and there is such a passage that seems a bit close:
******PE is the pre-installation environment. What it can be used for depends on what you do, what you want to do with it!
To put it simply, PE can be used to directly boot a Windows system or a Windows subsystem using a CD or even a USB flash drive. I mainly use it for maintenance. It can perform maintenance that can't be done under DOS. PE can boot a MINI Windows without a hard drive. You can customize it. It can access the local area network, dial up to the Internet, and modify system files and the registry when the system is damaged and even safe mode cannot be entered. Similar tools also include ERD and Microsoft's embedded system, etc. Microsoft's pre-installation system requires authorization. It can be generated using a foreign expert's Bart's PE, which uses the NU2 menu. Red Leaf's is of this kind. You can also use Bart's PE + XPE plug-in to make a simulated XP PE.
All functions can be customized by yourself!************
After reading it, I'm still "at a loss", unable to get started. Moreover, mine is a real "pure" DOS, with completely no relation to Windows.
Can this elder brother teach me? I'm really blank about PE. I've been checking everywhere and trying one by one, which is really too time-consuming. Anyway, thank you again for your kind reply. Although the problem hasn't been solved immediately, it has made me know that I don't need to waste time anymore. I've asked someone to help find a 1.5G Maxtor disk. This might be okay. Really thank you for your reply!
|
|
2009-4-21 03:16 |
|
|
bc12060101
银牌会员
    
积分 1455
发帖 712
注册 2006-1-20
状态 离线
|
『第 8 楼』:
使用 LLM 解释/回答一下
嘿嘿,楼上的太客气了。
窃以为若仅仅就此一次需要拷贝文件过机子,将硬盘摘下来挂到源文件机子上拷贝岂非更加快捷便当些?若今后仍将时常需要此类操作,则在机子上安装一个pe会来得方便许多。
所谓pe,对于一般的使用者而言,也就相当于一个微型的xp系统,从该系统引导启动之后,可以完成在xp系统下的基本操作。的确,它与dos没什么关系,但可以方便的完成某些在dos下难以进行的操作。
pe的安装不算复杂,仅仅需要拷贝几个文件到你的硬盘上(某个文件必须在某个分区的根目录下),然后简单的运行一下安装程序,ok!重新启动后就能够进入引导菜单从而选择启动pe系统了。
若有兴趣,不妨看看: http://bbs.wuyou.com/viewthread.php?tid=121168&extra=page%3D3
以及
http://bbs.wuyou.com/viewthread.php?tid=121168&extra=page%3D3
Hehe, the person above is too polite.
Personally, if it's just this one time that you need to copy files to another computer, wouldn't it be more convenient to take the hard drive off and hang it on the source file computer to copy? If you still need such operations frequently in the future, installing a PE on the computer will be much more convenient.
The so-called PE, for general users, is just like a mini XP system. After booting from this system, you can complete basic operations under the XP system. Indeed, it has nothing to do with DOS, but it can conveniently complete some operations that are difficult to do under DOS.
The installation of PE is not complicated. You just need to copy a few files to your hard drive (a certain file must be in the root directory of a certain partition), then simply run the installation program, and it's done! After restarting, you can enter the boot menu and then choose to boot the PE system.
If you are interested, you might as well take a look: http://bbs.wuyou.com/viewthread.php?tid=121168&extra=page%3D3
And
http://bbs.wuyou.com/viewthread.php?tid=121168&extra=page%3D3
|
|
2009-4-21 04:51 |
|
|
Jneny
高级用户
    中國DOS聯盟常任參議员
积分 686
发帖 318
注册 2005-11-4
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
才1G的硬盘。这个配置。。。 内存也不会有太多吧。
运行PE要用常规启动才好。
Only a 1GB hard drive. This configuration... The memory won't be too much either. To run PE, it's better to use the normal boot.
|

. 繽紛色彩閃出的美麗是因為它沒有分開每種色彩...>/
我的百度空间: BEYOND超越 为什么用DOS |
|
2009-4-21 05:16 |
|
|
bc12060101
银牌会员
    
积分 1455
发帖 712
注册 2006-1-20
状态 离线
|
『第 10 楼』:
使用 LLM 解释/回答一下
嘿嘿,参议员先生,您老想必是日理万机过于辛劳,才导致视力下降误读信息....。楼主那个1G的盘可是usb接口的玩意哦。
Hehe, Senator, you must be so busy with your daily tasks that you're overworked, which has led to poor eyesight and misreading the information.... The 1G disk in the original poster's post is a USB interface device, you know.
|
|
2009-4-21 06:10 |
|
|
netbenton
银牌会员
     批处理编程迷
积分 1916
发帖 752
注册 2008-12-28 来自 广西
状态 离线
|
『第 11 楼』:
使用 LLM 解释/回答一下
硬盘对拷或局域网传送都可以呀,没必要去找第三张盘吧?!
Hard disk cloning or LAN transfer is okay, there's no need to look for a third disk, right?!
|

精简
=> 个人 网志  |
|
2009-4-21 08:10 |
|
|
DOSforever
金牌会员
     
积分 4639
发帖 2239
注册 2005-1-30
状态 离线
|
|
2009-4-21 15:34 |
|
|
DOSforever
金牌会员
     
积分 4639
发帖 2239
注册 2005-1-30
状态 离线
|
|
2009-4-21 15:45 |
|
|
ABCDE12345
新手上路

积分 16
发帖 7
注册 2009-4-14 来自 江苏无锡
状态 离线
|
『第 14 楼』:
使用 LLM 解释/回答一下
谢谢,我把我的问题说明一下,第一,我的硬盘是四个分区,一个是主分区,其余是扩展的,全部是FAT32设定,用的是光盘起动进入DOS,
我在批处理中已经设置了LASTDRIVE=z
并能正常起动进入DOS,但就是不能进入E盘,但在用WINDOS中是能正常进入的,
能正常进入E、F盘,在DOS下不能。谢谢指教
Thanks, I'll explain my problem. First, my hard disk has four partitions, one is the primary partition, and the rest are extended ones, all set to FAT32. I boot into DOS from a CD. I have set LASTDRIVE=z in the batch file and can boot into DOS normally, but just can't enter drive E. But in Windows, I can enter drives E and F normally. Can't do it in DOS. Thanks for the advice.
|
|
2009-5-4 04:57 |
|
|
ABCDE12345
新手上路

积分 16
发帖 7
注册 2009-4-14 来自 江苏无锡
状态 离线
|
『第 15 楼』:
使用 LLM 解释/回答一下
另外我的硬盘是比较大的160个G每个区有40G
In addition, my hard disk is relatively large, 160 GB, and each partition is 40 GB.
|
|
2009-5-4 04:58 |
|
|