中国DOS联盟

MS-DOS 7.10 is the most practical and most widely used DOS currently because it is powerful, such as supporting various FAT12, FAT16, FAT32 partitions, large hard drives, large memory, long filenames, etc., and it is very practical with very good compatibility. And on it, you can use the WIN command to start the famous GUI programs under DOS - Windows 3.x and Windows 9x.

If Win9x has been installed in the system and then MS-DOS 7.10 is installed, the installation program usually prompts whether to automatically set the path of Win9x during installation so that you can directly enter the WIN command to enter Win9x. At this time, please choose "Yes". In this way, after MS-DOS 7.10 is successfully installed and started, if you want to enter Win9x, you only need to enter the WIN command under the DOS command line. If WinNT/2K/XP has been installed in the system and then MS-DOS 7.10 is installed, the installation program usually automatically makes a dual boot of DOS and WinNT/2K/XP. After MS-DOS 7.10 is successfully installed, the dual boot menu will automatically appear when the system starts. Select "MS-DOS 7.10" in the menu to enter the installed MS-DOS 7.10.

The download address of the complete installation version of MS-DOS 7.10 is now provided, and everyone is welcome to download and use it.

Floppy disk installation version (two disks):

Installation disk 1: http://www.cn-dos.net/msdos71/dos71_1.zip (required)
Installation disk 2: http://www.cn-dos.net/msdos71/dos71_2.zip (optional)

CD-ROM installation version:

Installation CD ISO image: http://help.cn-dos.net/soft/dos71cd.zip

Description: It includes not only various command-line external commands of MS-DOS 7.10, but also many graphical commands such as DOSSHELL, MSD, MSBACKUP, etc. Very practical! Recommended!

For more detailed information about the MS-DOS 7.10 boot disk or the complete installation version of MS-DOS 7.10, you can see it in the "DOS Boot Disk/LOGO Technology" section.

For more detailed information and more downloads about MS-DOS 7.10, please see here:
http://www.cn-dos.net/newdos/dosart32.htm

Thanks to the moderator for thinking so comprehensively, which has made it convenient for a newbie like me.

Missing MemMaker.....
Let me upload it~~
Open attachment Link has expired (Administrator's note)

Thanks to Wengier and ROY!

Hello,站长 Wengier. I downloaded the full-run version of MS-DOS 7.10 and extracted it to drive E. How do I run it? There's no instruction text found either. (My C drive is WINME, and D drive is XP) Please tell me. Thank you.
Also, I want to try it on another computer (also with C drive as WINME and D drive as XP). Copy the content of the 98 boot disk to drive E, and add a line in the BOOT.INI file to make the added line point to drive E. Please teach me, expert! Thanks a lot!

Use the SYS command to put the system files onto the C drive, and then copy and configure the relevant files.

If there are multiple systems, you also need to set the BOOT.INI file. For details, please refer to the article I wrote about the dual boot of DOS and WinNT/2K/XP.

Hello,站长 Wengier. I'm also a computer enthusiast. I have 5 operating systems installed on my computer and use sc to boot. Since the hard drive capacity is larger than 64G, installing the Windows 98 system always has errors, so I chose Windows Me. But there is a shortcoming: there is no pure DOS environment. I tried DOS 6.22 but it is not compatible with FAT32. For this reason, when I got the "MS-DOS 7.10 Complete Directly Run Version" sorted out by you, I was overjoyed. Thank you very much. Here I want to ask, can a "MS-DOS 8.0 Directly Run Version" be made in the same way? After all, this is the highest version of MS-DOS! Thank you again!

"MS-DOS 7.10 full installation version" is ready. Everyone is welcome to download and use it. For details, please see:
http://www2.zzu.edu.cn/ie/newdos/dispbbs.asp?boardID=11&ID=5363

It's a pity that MS-DOS 8.0 is not as easy to use as MS-DOS 7.10.

Stationmaster comrade:
After the full version of the 7.10 image, it cannot be installed under DOS. My C drive is NTFS, and the D drive is FAT32, but it still cannot be installed. I need your help again.

The following is a quote from ct on 2003-8-2 14:13:04:
Dear webmaster:
      After the full version of the 7.10 image, it cannot be installed under DOS. My C drive is NTFS and the D drive is FAT32, but it still cannot be installed. Please help me again.

Because the C drive is an NTFS partition, of course, DOS cannot be installed. If you really want to install it, please first convert the C drive to FAT32 format.

Dear webmasters:

Hello. I need it for work, but I don't have too much money. I want to buy a batch of low-priced computers from the second-hand computer market. But there are too many shrewd businessmen in the second-hand market. I want to find some convenient tool software to detect whether the hardware is in good condition under the DOS environment. What should I do? Please help to reply. Thanks a lot.
jzwty
jzhedywty@yahoo.com.cn

hwinfo489 detects hardware configuration information.

dm checks the hard disk.

I think the most important thing is to see if there are bad sectors on the hard disk.

It seems that the direct-run version is not as easy to use as the installed version.

Hope to make a complete installation program with the plug-in package

The following is the speech of yjflq2002 on 2003-8-18 7:51:35:
Hope to make a complete installer with the plug-in package.

That's available in the CD version.