先说明：
1：我原文件是按照安装电脑的硬盘是四分区，既有：C： D： E： F：。而IBM盘即隐藏盘是G：的，所以相应的批处理也是这么设的，如果你的硬盘不是四分区，你把下来的‘ibm安装BAT文件“文件里相应盘符里的批处理文件替换一下就行，如：”ibm(e)“文件夹里放的就是硬盘有两个分区，即：C： D： 而IBM盘是E：的批处理文件。
2：凡是要安装的文件如：ISO、GHO或I386文件夹都必须放在D盘根目录下，系统会自动安装
3：本系统第三个选项是为了不会系统安装的人预备的，在给别人安装完本系统后，你只要把I386目录放在IBM盘下，到时他启动系统选第三项时，系统会自动在IBM盘下寻找的。（当然，你可以自己用Winntsif软件为他连安装应答文件也做好）其中drive、s、vm批处理就是为了应答文件设的（哈哈，我自己是这样，你当然可以改）
4：讲讲安装，你只要在C盘下划出一个分区用GHOST把”IBM(释放的盘符默认G盘F10键).GHO“还原到那个分区（千万记得IBM分区可是主分区性质，不是逻辑的呦！！），然后双击”pq“这个批处理，你就可以享受这个系统了。
5：本系统在每次重新安装系统后IBM的F10键会失效，但是在D盘下会生成一个”请双击我“的批处理文件，只要点它IBM系统就会恢复！！
不好意思因为我也是初次做，借鉴不少前辈东西，而自己功底浅，所以做的麻烦。在此抛砖引玉希望高手完善，另精力有限没加上自动安装光盘系统的选项不能不说是一个遗憾，望有人完善。
提取地址：
http://cosmos.mofile.com/pogo/index2.html
提取码：
IBM(释放的盘符默认G盘F10键).rar 9519495982027238
ibm安装BAT文件.rar 2102084087024484
First, note:
1: My original file is based on the hard disk of the installed computer having four partitions, namely: C: D: E: F:. And the IBM disk, which is the hidden disk, is G:. So the corresponding batch processing is also set this way. If your hard disk does not have four partitions, you can replace the batch processing files in the corresponding drive letters in the downloaded "IBM installation BAT file" file. For example, the "ibm(e)" folder contains batch processing files for a hard disk with two partitions, namely: C: D: and the IBM disk is E:.
2: All files to be installed, such as ISO, GHO, or I386 folders, must be placed in the root directory of drive D, and the system will install automatically.
3: The third option of this system is for those who don't know how to install the system. After installing this system for others, you just need to place the I386 directory under the IBM disk. When they start the system and select the third item, the system will automatically search under the IBM disk. (Of course, you can use the Winntsif software to make the installation answer file for them yourself) Among them, the drive, s, vm batch processing are set for the answer file (haha, I do it myself, of course, you can change it).
4: Talk about installation. You just need to partition a partition on drive C, use GHOST to restore "IBM (the default drive letter for release is G, F10 key).GHO" to that partition (remember that the IBM partition is of primary partition nature, not logical!!), then double-click the "pq" batch processing, and you can enjoy this system.
5: In this system, the F10 key of IBM will become invalid after each reinstallation of the system, but a batch processing file named "Please double-click me" will be generated under drive D. Just click it and the IBM system will be restored!!
I'm sorry because I'm also doing it for the first time, I have referred to a lot of predecessors' things, but my own foundation is shallow, so it's troublesome to make. Here I throw out a brick to attract jade, hoping that experts will improve it. Also, due to limited energy, the option for automatically installing the CD-ROM system is not added, which is indeed a pity. I hope someone will improve it.
Extraction address:
http://cosmos.mofile.com/pogo/index2.html
Extraction code:
IBM (the default drive letter for release is G, F10 key).rar 9519495982027238
ibm installation BAT file.rar 2102084087024484
