|
loveoldpc
初级用户
积分 49
发帖 23
注册 2010-7-8
状态 离线
|
『楼 主』:
真实机安装Windows NT 3.51须知
使用 LLM 解释/回答一下
好办！我也不多说了，有几点要注意，硬盘最好为IDE，支持的最好，SATA的没试过，听说不支持。（想用Windows NT 5.0级以上操作系统安装双系统的，说句遗憾话：那是不可能的，因为Windows NT 5.0级以上操作系统不支持NT3.51）还有NT 3.51只支持FAT16/NTFS/HPFS。
我用WinPE将硬盘分成这样：
/主分区C：300M【FAT16】
HDD：主分区D：2GB【FAT16】 /逻辑分区E：20GB【NTFS 4.0】
\ 扩展分区：\逻辑分区F：20GB【NTFS 4.0】
我的硬盘差不多了，第2主分区是留给Windows NT 3.51的安装文件和唯一可与其共存的Windows NT 4.0的。
为防止错误我换上256MB DDR内存条。
用MS-DOS 6.22启动光盘、启动软盘、启动U盘启动电脑，
d:
cd i386
winnt.exe /b
启动安装程序，开始英文但有一点水平的人就能搞懂，买本字典也行
重启一次就是中文了。
突发急事
下回详解
sorry
Easy! I won't say too much. There are a few points to note. The hard drive is best IDE, which is the most supported. I haven't tried SATA, and I've heard it's not supported. (For those who want to install a dual system with Windows NT 5.0 or higher operating systems, I'm sorry to say: it's impossible because Windows NT 5.0 or higher operating systems don't support NT 3.51) Also, NT 3.51 only supports FAT16/NTFS/HPFS.
I divided the hard drive using WinPE like this:
/Primary partition C: 300M
HDD: Primary partition D: 2GB /Logical partition E: 20GB
\ Extended partition: \Logical partition F: 20GB
My hard drive is almost ready. The second primary partition is for the installation files of Windows NT 3.51 and the only Windows NT 4.0 that can coexist with it.
To prevent mistakes, I replaced it with a 256MB DDR memory stick.
Boot the computer with MS-DOS 6.22 boot CD, boot floppy, boot USB flash drive,
d:
cd i386
winnt.exe /b
Start the installation program. It starts in English, but anyone with a little proficiency can understand it. Buying a dictionary is also okay.
Reboot once and it will be in Chinese.
Sudden urgent matter
Detailed explanation next time
sorry
|
|
 2010-8-27 16:56 |
|
|
Vista2008
版主
积分 707
发帖 287
注册 2010-1-13
来自 尖竹汶府
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
Windowsnt3.51的api太老，很多 软件都不支持了！
The APIs of Windows NT 3.51 are too old, and many software don't support it anymore!
|
弟控才是王道阿 |
|
|
2010-8-27 20:47 |
|
|
doslike
版主
系统收藏家
积分 326
发帖 285
注册 2010-2-22
来自 黑龙江省
状态 离线
|
|
|
2010-8-28 13:26 |
|
|
xkai2010
初级用户
积分 121
发帖 57
注册 2010-8-9
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
2000/xp/2003是可以和nt3.51双启的，帮助里已经明确写了的。只是不能用ntfs格式。因为在安装新系统的时候，安装程序会把ntfs升级成最新的3.1版本，只有nt4sp4以上版本才能读取ntfs3.1。所以，如果要装nt4和2000/xp/2003双系统，而且只用ntfs分区的话（fat16空间浪费太严重），务必先给nt4打sp6a，不然，等你装好双系统后，你的nt4就再也启动不了了
Last edited by xkai2010 on 2010-8-30 at 15:16 ]
200/xp/2003 can dual-boot with NT 3.51, as clearly stated in the help. The only thing is that NTFS format cannot be used. Because when installing a new system, the installation program will upgrade NTFS to the latest version 3.1, and only NT 4 SP4 or later versions can read NTFS 3.1. So, if you want to install a dual system of NT 4 and 2000/xp/2003 and only use NTFS partitions (since FAT16 wastes too much space), be sure to install SP6a for NT 4 first, otherwise, after you install the dual system, your NT 4 will never be able to boot again.
Last edited by xkai2010 on 2010-8-30 at 15:16 ]
|
|
|
2010-8-30 15:15 |
|
|
yksoft1
高级用户
积分 823
发帖 395
注册 2006-1-28
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
nt3.1、3.5要改setup.inf和initial.inf才能支持pII以上CPU。。。
3.51其实还可以认出win95，可以与其双启
nt3.1, 3.5 need to modify setup.inf and initial.inf to support CPUs above pII... 3.51 can actually recognize win95 and can dual-boot with it
|
YKSOFT Systems |
|
|
2010-8-31 19:03 |
|
|
doslike
版主
系统收藏家
积分 326
发帖 285
注册 2010-2-22
来自 黑龙江省
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
谁要是能做到DOS/WIN 3.2 NT 3.1 3.51 3.5 4.0 5.0 5.1 5.2 ME 98 95引导菜单我就奖励他40分。（用NTLDR）
Whoever can make the boot menu for DOS/WIN 3.2 NT 3.1 3.51 3.5 4.0 5.0 5.1 5.2 ME 98 95 using NTLDR, I will reward him 40 points.
|
|
|
2010-9-5 15:44 |
|
|
Vista2008
版主
积分 707
发帖 287
注册 2010-1-13
来自 尖竹汶府
状态 离线
|
|
|
2010-9-5 18:10 |
|
|
Roy
管理员
專業島民
积分 4869
发帖 1633
注册 2002-12-10
状态 离线
|
『第 8 楼』:
使用 LLM 解释/回答一下
今天找了一台Pentium 133MHz, 32MB EDO RAM, 1.2GB HD, S3 Trio64V+安裝NT 3.51(原有 Win95 OSR2 + DOS 6.22)
一切順利，除了ISA Bus的Genius LAN 2000 II se網卡搞不定。
Today I found a Pentium 133MHz, 32MB EDO RAM, 1.2GB HD, S3 Trio64V+ and installed NT 3.51 (original Win95 OSR2 + DOS 6.22). Everything went smoothly except that the ISA Bus Genius LAN 2000 II se network card couldn't be made to work.
|
我的網站：http://mw16.2ya.com/ 我的網誌: http://scrappedblog.blogspot.com/
~
我的Winamp正在播放的歌曲:
 |
|
|
2010-9-7 18:41 |
|
|
Roy
管理员
專業島民
积分 4869
发帖 1633
注册 2002-12-10
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
Originally posted by Roy at 2010-9-7 18:41:
今天找了一台Pentium 133MHz, 32MB EDO RAM, 1.2GB HD, S3 Trio64V+安裝NT 3.51(原有 Win95 OSR2 + DOS 6.22)
一切順利，除了ISA Bus的Genius LAN 2000 II se網卡搞不定。
最後換成PCI的RTL8139，Firefox 2.0能跑，TightVNC 1.2.9也行，就是速度太慢<img src="images/smilies/face-raspberry.png" align="absmiddle" border="0">
Originally posted by Roy at 2010-9-7 18:41:
Today, I found a Pentium 133MHz, 32MB EDO RAM, 1.2GB HD, S3 Trio64V+ to install NT 3.51 (original Win95 OSR2 + DOS 6.22)
Everything went smoothly, except that the ISA Bus Genius LAN 2000 II se network card couldn't be made to work.
Finally replaced with a PCI RTL8139, Firefox 2.0 can run, TightVNC 1.2.9 also works, just very slow :P
|
我的網站：http://mw16.2ya.com/ 我的網誌: http://scrappedblog.blogspot.com/
~
我的Winamp正在播放的歌曲:
|
|
|
2010-9-8 14:31 |
|
|
ZUXING
初级用户
积分 36
发帖 32
注册 2010-10-9
状态 离线
|
『第 10 楼』:
回复6楼
使用 LLM 解释/回答一下
windows 3.2是先进dos再输入win进windows。
至于双启么……好像不太可能。我试过。2K和XP就不行。
Windows 3.2 is an advanced DOS, then you enter win to get into Windows. As for dual-booting... It doesn't seem possible. I tried. It doesn't work with 2K and XP.
|
|
|
2010-12-19 11:21 |
|
|
Roy
管理员
專業島民
积分 4869
发帖 1633
注册 2002-12-10
状态 离线
|
|
|
2011-1-8 23:38 |
|
|
fujianabc
金牌会员
积分 3467
发帖 1616
注册 2004-6-21
状态 离线
|
『第 12 楼』:
使用 LLM 解释/回答一下
Originally posted by Roy at 2011-1-8 11:38 PM:
最近有空截了圖:D
everest居然能在nt 3.51下运行
Originally posted by Roy at 2011-1-8 11:38 PM:
Recently I took some screenshots in my spare time :D
Everest can actually run under NT 3.51
|
|
|
2011-1-10 12:16 |
|
