|
yichya
新手上路

积分 4
发帖 3
注册 2009-7-4
状态 离线
|
『楼 主』:
求助,怎么在真实机器上安装Windows NT 3.51?
使用 LLM 解释/回答一下
我每次尝试的时候,多数情况下是各种各样的NTDETECT FAILED,比如在使用NTLDR启动安装程序的时候,以及尝试用GRUB4DOS 0.4.5启动安装程序的时候(更多数情况下chainloader完就提示incorrected or unsupported executeable format,有时chainloader bootsect.dat成功也是SETUP IS INSPECTING...下面一行ntdetect failed),我尝试过换用FAT32(8G)分区,FAT16(1.5G)分区,就连NTFS5我都试过了,没一次成功的。
我的C盘上还有OS不能随便格式化,MBR里安装了63S-GRUB(详见无忧启动)。
不知道有没有人有实机安装的经验,麻烦传授下。
顺便说句,NT3.51的那个UI加上能运行不少WIN32程序,拿来用真的相当装B。这严重勾起了我的好奇心...
Every time I try, most of the time it's various NTDETECT FAILED, such as when using NTLDR to boot the installer, and when trying to boot the installer with GRUB4DOS 0.4.5 (in most cases, after chainloader it prompts incorrected or unsupported executeable format, sometimes chainloader bootsect.dat successfully also has ntdetect failed under the line SETUP IS INSPECTING...). I have tried changing to a FAT32 (8G) partition, a FAT16 (1.5G) partition, and even NTFS5, but none have succeeded.
There are OSes on my C drive and I can't format it casually. There's 63S-GRUB installed in the MBR (details in Wuyou Boot).
I don't know if anyone has actual machine installation experience, please pass it on.
By the way, the UI of NT3.51 plus being able to run quite a few WIN32 programs is really quite showy. This has seriously aroused my curiosity...
|
|
2010-6-30 20:54 |
|
|
fujianabc
金牌会员
     
积分 3467
发帖 1616
注册 2004-6-21
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
Grub4dos只能直接chainloader win2000以上版本的ntldr,不能chainloader nt 3.51的。
你要在ms-dos 6.22中分一个小于8.4G的fat16分区(分区位置要在1024柱面之前)。然后在ms-dos 6.22下执行winnt /b开始安装。
估计你的问题是分区位于1024柱面之后了
Last edited by fujianabc on 2010-7-1 at 09:39 ]
Grub4dos can only chainload the ntldr of Windows 2000 and later versions directly, and cannot chainload that of NT 3.51.
You need to partition a FAT16 partition smaller than 8.4G in MS-DOS 6.22 (the partition should be before cylinder 1024). Then execute winnt /b under MS-DOS 6.22 to start the installation.
It is estimated that your problem is that the partition is behind cylinder 1024.
Last edited by fujianabc on 2010-7-1 at 09:39 ]
|
|
2010-7-1 09:26 |
|
|
Roy
管理员
          專業島民
积分 4869
发帖 1633
注册 2002-12-10
状态 离线
|
|
2010-7-1 09:27 |
|
|
yichya
新手上路

积分 4
发帖 3
注册 2009-7-4
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
哦...好吧,我正在分区。希望这次能成功。
Oh...Okay, I'm partitioning. Hope this works this time.
|
|
2010-7-1 10:40 |
|
|
yichya
新手上路

积分 4
发帖 3
注册 2009-7-4
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
已经装上了,感谢LS两位。
但是还有个问题,为什么我想装351pack.v6里的vbemp总是不成功,都提示安装成功我也重启了,但是还是16色改不了?或者还有什么可以支持1024X768@65536色的驱动程序,能打开85HZ刷新就更好了
It has been installed, thanks to the two in LS. But there is still a problem. Why is it that when I want to install vbemp in 351pack.v6, it always fails? I am prompted that the installation is successful and I have restarted, but I still can't change to 16 colors? Or are there any other driver programs that support 1024X768@65536 colors, and it would be better if it can open 85HZ refresh rate.
|
|
2010-7-1 13:13 |
|