中国DOS联盟论坛 - Powered by Discuz! Board

标题: 如何整合HDD1.71 到win98启动盘的批处理中？ [打印本页]

作者: beauking 时间: 2009-5-8 02:14 标题: 如何整合HDD1.71 到win98启动盘的批处理中？

Boot.ini中已经有类似MaxDOS的启动项。只是我这个很简化，就一个IMA的文件，相当于win98启动盘。
我想把HDD1.71 IMG中的文件都放入win98启动盘IMG中，并且编辑autoexec.bat / config.sys ，使之添加一条“HDD 1.71”的选项。

说明：
1、我直接将HDD1.71 IMG 替换到win98启动盘IMG，能够正常运行。所以才有了想整合的想法。
2、两者的 config.sys IMG差不多通用，添加一条“menuitem＝HDD等内容”就可以了。
3、autoexec.bat 的整合编辑总是不成功！最后提示：Incorrect Diskette. Press any key to exit.

要求：
以下 autoexec.bat 中蓝色部分是 HDD1.71 IMG的 autoexec.bat 内容。直接添加如最顶部。
1、如果选择 “HDD”选项（IF "%config%"=="HDD" GOTO HDD171），那么就直接运行 “:HDD171” 内容，并且跳过其他所有批处理命令。
2、实际运行失败。即使选择 “NOCD” ，依然会运行 “hddreg.bat”，为何 “GOTO END” 无法跳过中间命令呢？
3、我应该怎么编辑整个这个 autoexec.bat 才好啊？

Quote:

@ECHO OFF
IF "%config%"=="HDD" GOTO HDD171

:HDD171
set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15
set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C
cls
call SET_HDD.BAT %LglDrv%
path=%RAMD%:\
extract /y /e /l %RAMD%: hddreg.cab > NUL
hddreg.bat
GOTO END

set EXPAND=YES
SET DIRCMD=/O:N
set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15
set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C
cls
call setramd.bat %LglDrv%
set temp=c:\
set tmp=c:\
path=%RAMD%:\;a:\;%CDROM%:\
copy command.com %RAMD%:\ > NUL
set comspec=%RAMD%:\command.com
copy extract.exe %RAMD%:\ > NUL
copy readme.txt %RAMD%:\ > NUL

:ERROR
IF EXIST ebd.cab GOTO EXT
echo Please insert Windows 98 Startup Disk 2
echo.
pause
GOTO ERROR

:EXT
%RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL
echo The diagnostic tools were successfully loaded to drive %RAMD%.
echo.

IF "%config%"=="NOCD" GOTO QUIT
IF "%config%"=="HELP" GOTO HELP
LH %ramd%:\MSCDEX.EXE /D:mscd001 /L:%CDROM%
echo.
GOTO QUIT

:HELP
cls
call help.bat
echo Your computer will now restart and the startup menu will appear.
echo.
echo.
echo.
echo.
echo.
echo.
echo.
echo.
echo.
echo.
restart.com
GOTO QUIT

:QUIT
echo To get help, type HELP and press ENTER.
echo.
rem clean up environment variables
set CDROM=
set LglDrv=

:END

作者: rzg1972 时间: 2010-12-2 00:17
@ECHO OFF
IF "%config%"=="HDD" GOTO HDD171

set EXPAND=YES
SET DIRCMD=/O:N
set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15
set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C
cls
call setramd.bat %LglDrv%
set temp=c:\
set tmp=c:\
path=%RAMD%:\;a:\;%CDROM%:\
copy command.com %RAMD%:\ > NUL
set comspec=%RAMD%:\command.com
copy extract.exe %RAMD%:\ > NUL
copy readme.txt %RAMD%:\ > NUL

:ERROR
IF EXIST ebd.cab GOTO EXT
echo Please insert Windows 98 Startup Disk 2
echo.
pause
GOTO ERROR

:EXT
%RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL
echo The diagnostic tools were successfully loaded to drive %RAMD%.
echo.

IF "%config%"=="NOCD" GOTO QUIT
IF "%config%"=="HELP" GOTO HELP
LH %ramd%:\MSCDEX.EXE /D:mscd001 /L:%CDROM%
echo.
GOTO QUIT

:HELP
cls
call help.bat
echo Your computer will now restart and the startup menu will appear.
echo.
echo.
echo.
echo.
echo.
echo.
echo.
echo.
echo.
echo.
restart.com
GOTO QUIT

:QUIT
echo To get help, type HELP and press ENTER.
echo.
rem clean up environment variables
set CDROM=
set LglDrv=
GOTO END

:HDD171
set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15
set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C
cls
call SET_HDD.BAT %LglDrv%
path=%RAMD%:\
extract /y /e /l %RAMD%: hddreg.cab > NUL
hddreg.bat

:END