『楼 主』:
不用驱动，用NC联机的好方法。
使用 LLM 解释/回答一下
我见许多论坛都有dos下有关联机的文章，有用interlnk， LL3 ， netLite ...等。
但是却没见提到NC ， 即norton commander 5.0 的 Link 联机功能。
我觉得在dos下连机，多数是拷贝一下文件应一下急。这一点用NC的Link功能最方便。
应用：
两台机要对考文件，必须在两台机都有NC的文件，运行nc，大F9，有一Link 选项其中一台选Master 另一台选 Slave 就可以对考了。
还有network 项，我没有试过。
nc 有个主文件，只有300K 左右，它不但可以联机还可以进入中文子目录，很适合拷贝一百几十兆的小文件，唯一不足的是不支持长文件名，如果拷贝了长文件名回变成短文件名但不影响文件的使用。可以在windows 中dos窗口下运行nc。
NC的个主文件：
NC CFG 1,253 07-12-96 22:27 NC.CFG
NC EXE 3,772 07-12-96 22:27 NC.EXE
NC HLP 68,158 07-12-96 22:27 NC.HLP
NC INI 1,592 10-23-02 11:34 NC.INI
NC MSG 15,927 07-12-96 22:27 NC.MSG
NCMAIN EXE 233,522 04-26-97 23:39 NCMAIN.EXEDISKEDIT
NC还可以把自己克隆到另一台没有NC的机上，然后再进行联机，要用串口线，不过不是每次都能成功，但在不能拆机等特殊情况下是很有用的。
另外wengier 提供的dos7.10 启动软盘中有一个类似NC的文件管理器，精简又好用，还支持长文件名，只是不支持联机，真是太可惜了。
同时，谢谢wengier 提供的dos 7.10 ，很优秀。
I see that many forums have articles about networking under DOS, using interlnk, LL3, netLite, etc.
But I haven't seen mention of NC, that is, the Link networking function of Norton Commander 5.0.
I think that most networking under DOS is just copying files in an emergency. In this regard, the Link function of NC is the most convenient.
Application:
To copy files between two machines, both machines must have NC files. Run nc, press F9, there is a Link option. One machine selects Master and the other selects Slave, and then you can copy files.
There is also a network item, which I haven't tried.
NC has a main file, only about 300K. It can not only network but also enter Chinese subdirectories. It is very suitable for copying small files of about one or two hundred megabytes. The only shortcoming is that it does not support long filenames. If you copy long filenames, they will become short filenames, but it does not affect the use of the files. You can run nc in the DOS window in Windows.
Main files of NC:
NC CFG 1,253 07-12-96 22:27 NC.CFG
NC EXE 3,772 07-12-96 22:27 NC.EXE
NC HLP 68,158 07-12-96 22:27 NC.HLP
NC INI 1,592 10-23-02 11:34 NC.INI
NC MSG 15,927 07-12-96 22:27 NC.MSG
NCMAIN EXE 233,522 04-26-97 23:39 NCMAIN.EXEDISKEDIT
NC can also clone itself to another machine that doesn't have NC, and then perform networking. You need a serial cable. But it doesn't always succeed, but it is very useful in special cases such as when you can't disassemble the machine.
In addition, there is a file manager similar to NC in the DOS 7.10 boot floppy provided by wengier. It is streamlined and easy to use, and also supports long filenames. It just doesn't support networking, which is really a pity.
At the same time, thank you wengier for providing DOS 7.10, which is excellent.
|
