楼上的高手，请先到这个地址来玩玩我的PM8.5镜像吧。
http://www.brsbox.com/filebox/down/fc/1112655b75b006a0aaa3cb1bfaf28be6
PM8.5启动img镜像，镜像体4M(压缩包2.79M)，模拟成A:\。支持VMware直接调用(无需Easyboot调用)，支持USB-ZIP模拟，当然也支持Easyboot调用。
请你不要通过Easyboot，而是直接在VMware里设个虚拟OS，然后添加个虚拟软驱指向该镜像。只要在VM的Bios中启用Floppy支持，不管是设成1M盘支持还是2M盘支持格式，你看看调用此镜像有问题吗？
试完了再说VM软驱有2.88M限制。
补：
1.按本人用VM的简短历程来看，VM的Bios里所设软驱格式，受影响的是，如果你设虚拟软驱时指向的是物理软驱而非镜像。如果指向镜像，则不受此处指定的格式影响(除非你指定了虚拟软驱为none就受影响)。
2.为什么我提出楼顶的问题，就是因为我曾经下载过某个十几M的img镜像在VM里直接调用都可以模拟成A:\，当时以为简单，以为和做小镜像同样道理，并且当时没有做大镜像的冲动，所以没把那个镜像文件保留下来，现在自己想做大镜像碰到问题，又找不到那个镜像了(最惨连名字都忘了，所以搜索引擎翻大半天也没着落)，所以才慕名到本论坛发帖求助。
在此不是向楼上的高手挑战能力，也许我还没够格。首先感谢楼上高手的多次热情回复，可我是来找处理问题的方法的，而不是来等待“这不支持，那也不行”的回帖的。谢谢……
Expert高手 upstairs, please come to this address first to play with my PM8.5 image.
http://www.brsbox.com/filebox/down/fc/1112655b75b006a0aaa3cb1bfaf28be6
PM8.5 boot img image, the image body is 4M (compressed package is 2.79M), simulated as A:\. Supports direct call by VMware (no need for Easyboot call), supports USB-ZIP simulation, and of course supports Easyboot call.
Please don't use Easyboot, but directly set a virtual OS in VMware, then add a virtual floppy drive pointing to this image. Just enable Floppy support in the VM's Bios, whether it is set to 1M disk support or 2M disk support format, let's see if there is a problem when calling this image?
After testing, it is found that the VM floppy drive has a 2.88M limit.
Supplement:
1. According to my short experience with VM, the floppy drive format set in the VM's Bios is affected in that if you set the virtual floppy drive to point to a physical floppy drive instead of an image. If it points to an image, it is not affected by the format specified here (unless you specify the virtual floppy drive as none, then it is affected).
2. The reason why I raised the question on the roof is because I once downloaded a dozen M image in VM and could directly call it to simulate as A:\. At that time, I thought it was simple, thought it was the same principle as making a small image, and at that time I had no urge to make a large image, so I didn't keep that image file. Now I want to make a large image and encounter problems, and I can't find that image anymore (the worst is that I even forgot the name, so the search engine has been flipping for a long time without results), so I came to this forum to post for help.
Here I am not challenging the ability of the upstairs master, maybe I am not qualified enough. First of all, thank the upstairs master for the many enthusiastic replies, but I am here to find the method to solve the problem, not to wait for the reply of "this is not supported, that is not possible". Thank you...
