本人想用GRUB做一个自己带的工具的启动型盘
按网上的方法做了好几次只有用Weasel-瓦斯曲-WinPE【25M】＆Dos硬盘-U盘版
做成功过(
http://os.deepin.org/read-htm-tid-876904.html)
用U盘版 WinPe + MaxDosV7SE + MaxDosV6Plus 三合一(
http://pzz.cn/bbs/read.php?tid=57896)和晨枫工作室出品的MaxDOS+WinPE+GHOST常用版本 U盘启动盘维护工具 (
http://myfeng.cn/news_display.asp?keyno=97)都没有成功
都是按照他们的步骤做的,还有我自己进行修改菜单文件也没有成功的
编辑菜单文件后都是用GRUBMEUN导入到引导文件里的
U盘都是用的USB-HDD格式的
不知道是不是菜单哪里有问题还是引导文件有问题
没有成功的就是启动的的时候停在TRY（HD0，0）：FAT32：这里不动啦
有知道的请跟帖子，或联系QQ71715641
Last edited by lovl88 on 2008-12-9 at 19:01 ]
I want to use GRUB to make a bootable disk with my own tools. I have done it several times according to the online methods, and only succeeded with Weasel-Washi-Q-WinPE & DOS Hard Disk - USB Flash Drive Version (
http://os.deepin.org/read-htm-tid-876904.html)
The ones with USB Flash Drive Version WinPe + MaxDosV7SE + MaxDosV6Plus three-in-one (
http://pzz.cn/bbs/read.php?tid=57896) and the MaxDOS + WinPE + GHOST commonly used version USB flash drive bootable disk maintenance tool produced by Chenfeng Studio (
http://myfeng.cn/news_display.asp?keyno=97) did not succeed.
I followed their steps, and also modified the menu file myself but did not succeed.
After editing the menu file, I all imported it into the boot file using GRUBMEUN.
The USB flash drives are all in USB-HDD format.
I don't know if there is a problem with the menu or the boot file.
The one that didn't succeed is that when booting, it stops at TRY (HD0,0): FAT32: and doesn't move.
Those who know please reply to the post or contact QQ 71715641
Last edited by lovl88 on 2008-12-9 at 19:01 ]
