你先要有软盘驱动器，就是盘符为A：或B：的驱动器，然后才能运行 HD-Copy ，然后按键盘上的方向键选择 Get from file，再输入IMG文件存放位置，例如我的在C:\DOS_1.img，然后回车，如图：
再按键盘上的方向键选择 Write ，如果软盘上有文件，还需要按一下 Y 确认删除软盘上所有文件，等所有绿色的 V 都闪完了就把 DOS_1.img 的内容写到软盘上了。要写下一个文件，就选择 Get from file，再输入 DOS_2.img，回车，再换一张空软盘，再选择 Write 。
First, you need to have a floppy disk drive, that is, a drive with the drive letter A: or B:. Then you can run HD-Copy. Then press the arrow keys on the keyboard to select Get from file, and then enter the storage location of the IMG file. For example, mine is in C:\DOS_1.img, then press Enter, as shown in the figure:
Then press the arrow keys on the keyboard to select Write. If there are files on the floppy disk, you also need to press Y once to confirm deleting all files on the floppy disk. When all the green Vs flash, the content of DOS_1.img has been written to the floppy disk. To write the next file, select Get from file, then enter DOS_2.img, press Enter, then change to an empty floppy disk, and then select Write.
