|
Wengier
系统支持
“新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『楼 主』:
下载：我用UCSHELL做的DOS下中文GUI图形启动盘
使用 LLM 解释/回答一下
我刚才正式用著名的UCSHELL做了一个全中文的GUI图形启动盘。。它的界面和功能都真的非常强大美观呢（至少比MenuStar、DOS94这样的GUI/菜单程序强了很多）。。它的界面和操作都与Mini-Win3.x很相似，但启动速度却快了不少，体积也小了不少（和UCDOS 7.0内核合在一起，用ACE压缩后才300KB多一些）哦。~~用它来做全中文的GUI图形启动盘看来真的很合适呢。。当然，这个只是一个样品，现在里面的图标和快捷方式还不算多，但大家可以在它的基础上轻易增加自己想要的内容的（而是可以是全中文的呢！）。。
值得一提的是，本启动盘（仍采用MS-DOS 7.10内核）支持大硬盘、FAT32、大内存、光驱、鼠标等，而且有很多的空闲常规内存（在我的电脑上是625KB的Free常规内存）。大家试试吧，欢迎提出建议，谢谢。。
打开附件
I just officially used the famous UCSHELL to make a full Chinese GUI bootable disk. Its interface and functions are really very powerful and beautiful (at least much stronger than MenuStar, DOS94 and other GUI/menu programs). Its interface and operation are very similar to Mini-Win3.x, but the boot speed is much faster and the volume is much smaller (combined with the UCDOS 7.0 kernel and compressed with ACE, it is only more than 300KB). Oh.~~ It really seems very suitable to use it to make a full Chinese GUI bootable disk. Of course, this is just a sample. Now the icons and shortcuts inside are not many, but everyone can easily add their own desired content on its basis (and it can be in full Chinese!).
It is worth mentioning that this bootable disk (still using MS-DOS 7.10 kernel) supports large hard disks, FAT32, large memory, CD-ROM, mouse, etc., and there are many free conventional memories (625KB of Free conventional memory on my computer). Give it a try, and suggestions are welcome, thank you.
Open attachment
|
Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站，里面有各类DOS软件和资料，地址：
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com （最近比较忙，有事请联系DOSroot和雨露，谢谢！）
 |
|
 2003-7-6 00:00 |
|
|
pizigao
银牌会员
三生缘里笑红尘
积分 1063
发帖 292
注册 2003-3-9
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
哈哈！！我第一个！！我下一个，试一下！！！！谢谢老大！！！
Haha!! I'm the first one!! I'll try the next one!!! Thanks boss!!!
|
 |
|
|
2003-7-7 00:00 |
|
|
pizigao
银牌会员
三生缘里笑红尘
积分 1063
发帖 292
注册 2003-3-9
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
老大！我用了一下，怎么光标停留在
Made by Wengier. China DOS Union.
All rights reserved. 2002-2003.
就不动了呢？？？软驱的灯立即就不亮了，再也没有反应了！！！（是不是和硬件有什么关系啊！！！？？）
Boss! I used it, why does the cursor stay at
Made by Wengier. China DOS Union.
All rights reserved. 2002-2003.
and doesn't move??? The light of the floppy drive immediately stops shining and there's no response anymore!!! (Is it related to the hardware or something!!!?)
|
|
|
|
2003-7-7 00:00 |
|
|
电吉入侵
初级用户
积分 1480
发帖 377
注册 2003-6-6
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
不错不错, 要顶.........
不过好像很慢啊(我用虚拟机, 不存在读盘慢问题).........
Not bad, not bad. Need to top up.........
But it seems very slow. (I use a virtual machine, there is no problem of slow disk reading).........
|
欢迎大家访问我的主页!
精品.爱好http://iso.533.net |
|
|
2003-7-7 00:00 |
|
|
lydong
元老会员
积分 1468
发帖 407
注册 2002-10-21
来自 广州
状态 离线
|
|
|
2003-7-7 00:00 |
|
|
LK
高级用户
积分 915
发帖 309
注册 2002-12-22
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
无论是用VPC还是软盘，我都是没有成功！用软盘启动完什么都没有只见有 H:\ _ 的光标在闪。
Whether using VPC or a floppy disk, I didn't succeed! After booting with the floppy disk, there's nothing, only the cursor flashing at H:\_.
|
|
|
2003-7-7 00:00 |
|
|
Dark-Destroy
元老会员
积分 8312
发帖 3551
注册 2003-3-22
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
我也是,沒有成功
出現:
CD01:Not ready reading drive E
Abort, Retry, Fail?
Me too, it didn't succeed. Appeared:
CD01:Not ready reading drive E
Abort, Retry, Fail?
|
MSN：tiqit2@hotmail.com
 |
|
|
2003-7-7 00:00 |
|
|
maple
中级用户
积分 417
发帖 137
注册 2003-5-30
状态 离线
|
|
|
2003-7-7 00:00 |
|
|
maple
中级用户
积分 417
发帖 137
注册 2003-5-30
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
试用OK! 不过没有任何文件管理器, 同时不支持长文件名(中文支持OK),即使运行了DOSLFN,
由于没有文件管理器(我发现不到?) ,看到的文件名是在浏览的窗口看到的. 同时发现在运行栏里运行VC时出现重新启动的现象 .进入到DOS界面时则可以运行VC. 重要一点: 能否执行16位的TOTAL COMMANDER ,若OK ,则所有的文件管理器都可以不要了.
Try it out! But there are no file managers at all, and long filenames are not supported (Chinese support is OK). Even if DOSLFN is run, because there is no file manager (I can't find it?), the filenames seen are in the browsing window. At the same time, I found that when running VC in the run bar, a restart phenomenon occurs. When entering the DOS interface, VC can be run. An important point: Can 16-bit TOTAL COMMANDER be executed? If OK, then all file managers can be dispensed with.
|
|
|
2003-7-7 00:00 |
|
|
Wengier
系统支持
“新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 10 楼』:
使用 LLM 解释/回答一下
以下是引用pizigao在2003-7-7 11:49:49的发言：
老大！我用了一下，怎么光标停留在
Made by Wengier. China DOS Union.
All rights reserved. 2002-2003.
就不动了呢？？？软驱的灯立即就不亮了，再也没有反应了！！！（是不是和硬件有什么关系啊！！！？？）
我刚才在我的三台系统配置均不同的电脑上试了，结果用它启动时一切均正常呢。。
The following is the speech of pizigao on 2003-7-7 11:49:49:
Boss! I used it, why does the cursor stay at
Made by Wengier. China DOS Union.
All rights reserved. 2002-2003.
It doesn't move!!! The light of the floppy drive immediately stops flashing, and there is no response anymore!!! (Is it related to the hardware or something!!!?)
I just tested it on three computers with different system configurations, and the result is that everything is normal when booting with it.
|
Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站，里面有各类DOS软件和资料，地址：
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com （最近比较忙，有事请联系DOSroot和雨露，谢谢！）
|
|
|
2003-7-8 00:00 |
|
|
电吉入侵
初级用户
积分 1480
发帖 377
注册 2003-6-6
状态 离线
|
『第 11 楼』:
使用 LLM 解释/回答一下
以下是引用maple在2003-7-7 15:14:46的发言：
试用OK! 不过没有任何文件管理器, 同时不支持长文件名(中文支持OK),即使运行了DOSLFN,
由于没有文件管理器(我发现不到?) ,看到的文件名是在浏览的窗口看到的. 同时发现在运行栏里运行VC时出现重新启动的现象 .进入到DOS界面时则可以运行VC. 重要一点: 能否执行16位的TOTAL COMMANDER ,若OK ,则所有的文件管理器都可以不要了.
对啊, 如果支持长文件名就好了.....
The following is a quote from maple on 2003-7-7 15:14:46:
It works! But there is no file manager at all, and long filenames are not supported (Chinese support is OK). Even after running DOSLFN, because there is no file manager (I can't find it?), the filenames seen are in the browsing window. Also, I found that when running VC in the run bar, there is a reboot phenomenon. When entering the DOS interface, VC can be run. An important point: Can 16-bit TOTAL COMMANDER be executed? If OK, then all file managers can be dispensed with.
Yeah, if it supported long filenames, that would be great.....
|
欢迎大家访问我的主页!
精品.爱好http://iso.533.net |
|
|
2003-7-8 00:00 |
|
|
wglwx
高级用户
积分 616
发帖 187
注册 2003-4-18
状态 离线
|
『第 12 楼』:
使用 LLM 解释/回答一下
我试用也没有成功.
UCDOS可以正常加载,但UCSHELL加载以后,显示就乱了.屏幕上面三分之一有图形,是已被分割的乱图,鼠标只可以移动一半面积,左右键点击失效.
现在我已经解决.是把UCSHELL.INI中的第二行改成:rem ScreenMode=VM_640X480X256
即屏蔽掉此行,UCSHELL可以正常启动了.特提供给大家参考.
I tried it but didn't succeed.
UCDOS can be loaded normally, but after UCSHELL is loaded, the display is garbled. One-third of the screen has graphics, which are fragmented and garbled. The mouse can only move in half the area, and left and right clicks are invalid.
Now I have solved it. I changed the second line in UCSHELL.INI to: rem ScreenMode=VM_640X480X256, that is, blocked this line, and UCSHELL can start normally. I specially provide this for everyone's reference.
|
|
|
2003-7-8 00:00 |
|
|
zjzzjz
初级用户
积分 148
发帖 17
注册 2003-6-10
状态 离线
|
『第 13 楼』:
使用 LLM 解释/回答一下
遗憾，我试用也没有成功，恐怕通用性还不理想
。
Regretrieved the content: "遗憾，我试用也没有成功，恐怕通用性还不理想"
Translated: Unfortunately, my trial also didn't succeed. I'm afraid the generality is still not ideal.
|
|
|
2003-7-8 00:00 |
|
|
zl7322
高级用户
积分 871
发帖 269
注册 2003-7-2
状态 离线
|
|
|
2003-7-8 00:00 |
|
|
zl7322
高级用户
积分 871
发帖 269
注册 2003-7-2
状态 离线
|
|
|
2003-7-8 00:00 |
|
