|
tongbin2004
初级用户
 
积分 73
发帖 20
注册 2005-9-19 来自 河北唐山
状态 离线
|
『楼 主』:
怎样安装win3.x的 svga.exe256色通用显卡驱动程序
使用 LLM 解释/回答一下
1。小弟最近需要安装win3.x,听说svga.exe是win3x的通用显卡驱动程序,本论坛的好心人给了小弟一个。
我想知道svga.exe是win3x的通用显卡驱动程序吗?小弟的显卡是tnt2,能svga.exe吗?如果能,怎没装?小弟是一菜鸟,还望各位大侠不吝赐教。
2。另外,小弟在安装玩win3。0后,重启计算机进入命令提示符后,输入win,进步去win3.0,内核是dos7。1,是因为dos版本太高的缘故,还是因为显卡是TNT2的缘故?
3。小弟因为要装win3.x,所以安装了dos7。1与dos6.22,dos7.1很正常,但是安装dos6.22后,小弟的硬盘上只剩下c:盘了,用pqmagic一看,其他空间竟然没有分配,天哪!!!!一定是dos6.22破坏了分区表,不知道哪位大侠出主意帮小弟回复以前的分区表,小弟万分感激!!!!
以上三个问题小弟这个大闲人大菜鸟绞尽脑汁也解决不了,
请各位高手指教!!!
1.小弟最近需要安装win3.x,听说svga.exe是win3x的通用显卡驱动程序,本论坛的好心人给了小弟一个。
我想知道svga.exe是win3x的通用显卡驱动程序吗?小弟的显卡是tnt2,能svga.exe吗?如果能,怎没装?小弟是一菜鸟,还望各位大侠不吝赐教。
1. Recently, I need to install Win3.x. I heard that svga.exe is a universal graphics driver for Win3x, and a kind person in this forum gave me one.
I want to know if svga.exe is a universal graphics driver for Win3x? My graphics card is TNT2, can it work with svga.exe? If it can, how to install it? I'm a newbie, so I hope all the experts can give me some advice.
2。另外,小弟在安装玩win3。0后,重启计算机进入命令提示符后,输入win,进步去win3.0,内核是dos7。1,是因为dos版本太高的缘故,还是因为显卡是TNT2的缘故?
2. In addition, after I installed Win3.0, I restarted the computer and entered the command prompt, then typed win, but couldn't get into Win3.0. The kernel is DOS 7.1. Is it because the DOS version is too high, or because the graphics card is TNT2?
3。小弟因为要装win3.x,所以安装了dos7。1与dos6.22,dos7.1很正常,但是安装dos6.22后,小弟的硬盘上只剩下c:盘了,用pqmagic一看,其他空间竟然没有分配,天哪!!!!一定是dos6.22破坏了分区表,不知道哪位大侠出主意帮小弟回复以前的分区表,小弟万分感激!!!!
3. Because I need to install Win3.x, I installed DOS 7.1 and DOS 6.22. DOS 7.1 is normal, but after installing DOS 6.22, there is only a C: drive left on my hard drive. When I used PQMagic, I found that the other space was not allocated. Oh my god! It must be that DOS 6.22 damaged the partition table. I don't know which expert can give me an idea to restore the previous partition table. I'm very grateful!
以上三个问题小弟这个大闲人大菜鸟绞尽脑汁也解决不了,
请各位高手指教!!!
The above three problems can't be solved by me, a big newbie, after racking my brains.
Please all the experts give me some advice!
|
|
2005-10-24 17:37 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
svga.exe是Win3.x通用显卡驱动程序没错,不过它也并非全部适合,像一些较新的显卡就不行。至于能否适合于某种特定的显卡,需自己安装试试看(安装其实很简单,在控制面板中用系统设置程序更换显示驱动即可)。
至于进入Win3.x的问题,请给出详细的错误提示信息,这样才能有针对性的去判断问题的原因并得到解决。
svga.exe is indeed a common video card driver for Win3.x, but it's not suitable for all. For example, some newer video cards are not compatible. Whether it is suitable for a specific video card needs to be tested by installing it yourself (installation is actually very simple, you can change the display driver using the system settings program in the control panel).
As for the issue of entering Win3.x, please provide detailed error prompt information, so that we can judge the cause of the problem and solve it pertinently.
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2005-10-26 10:50 |
|
|
fdsiuha
高级用户
    闷
积分 587
发帖 302
注册 2005-7-25
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
WIN3.1在安装的时候要LOCK锁住硬盘,而且好象还只能是WIN95的DOS7
When installing WIN3.1, you need to LOCK the hard disk, and it seems that it can only be DOS 7 of WIN95.
|

欢迎造访DOS的小屋!
http://risky.ik8.com |
|
2005-11-7 22:10 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
如果是用的MS-DOS 7.1完整安装版,那么直接安装和运行Win3.x是没有问题的,正常情况下都可以正常运行。如果内存大于256MB,可按我以前在论坛中说过的方法简单修改一下即可解决。
目前Win3.x下终于有了真正通用的256色SVGA驱动程序,见这儿:
http://www.cn-dos.net/forum/viewthread.php?tid=18579&fpage=1
If you use the full installation version of MS-DOS 7.1, then directly installing and running Win3.x is no problem, and it can normally run under normal circumstances. If the memory is greater than 256MB, you can simply modify it according to the method I mentioned in the forum before to solve the problem.
Currently, there is finally a truly universal 256-color SVGA driver under Win3.x, see here:
http://www.cn-dos.net/forum/viewthread.php?tid=18579&fpage=1
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2006-1-5 11:26 |
|
|
tongbin2004
初级用户
 
积分 73
发帖 20
注册 2005-9-19 来自 河北唐山
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
请问楼长关于内存的帖子在哪里呀?
Where is the post about memory by the building manager?
|
|
2006-1-7 18:30 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
|
2006-1-8 00:15 |
|
|
bgy08
新手上路

积分 2
发帖 1
注册 2007-4-15
状态 离线
|
『第 7 楼』:
我想下载
使用 LLM 解释/回答一下
我现在非常需要这个软件
I am in great need of this software now
|
|
2007-4-15 13:37 |
|