中国DOS联盟

I booted from a network boot disk and ran HXLDR32.EXE, why did the following phenomenon occur? Please give advice from the experts: as shown in Figure (1)
Or tell me a tool that can download things under DOS as shown in Figure (2)

It can be done with wget.
http://www.rahul.net/dkaufman/

wget is a DOS tool for win32. I need a pure DOS one! Please help!

Seek download tools under DOS. Not for win32, unless you can provide a download tool that can run win32 under DOS as well!

Originally posted by xuchunyi at 2006-9-11 10:37 PM:
wget is a DOS tool for Win32!

I need a pure DOS one!!! Help me out

Don't you understand English?

Now available is a DOS port of wget 1.8.2. It uses the WATT-32 tcp library, as does the lynx port. This version also supports SSL so you can retrieve via the https protocol. Please see the distribution restrictions for strong cryptography in the section on lynx above. This port will automatically convert filenames that are illegal under DOS as it retrieves the file. If running under Win9x or WinNT, you should probably use a port that uses Winsock instead of a packet driver. You can download wget here (538575 bytes, 2 September 2002).

This version of wget is correct, it can run under DOS. But there was still an error when downloading, and I still need to ask everyone for guidance! As shown in the figure

Originally posted by xuchunyi at 2006-9-13 05:00 AM:
This version of wget is correct, and it can run under DOS. But there is still an error when downloading. I still need to ask you guys for advice! As shown in the picture

Did you run the packet driver?

No, because I saw the network was connected and didn't care. Can you give me a DOS version of the packet driver? I didn't find this program in the boot disk.

I'm a newbie, relatively slow-witted! Please give more guidance.

You should look for PACKET DRIVER in places like driver disks for compatible network cards, relevant software distribution sites that deal with retro - computing network drivers, or documentation that comes with old network hardware which might contain the PACKET DRIVER.

具体翻译：
出现下面这个提示，我应该在那里去找 PACKET DRIVER 呢？

FTP Transfer Program
Version 0.70
Type HELP for more information
未找到数据包驱动程序
c:\ftp>

You should look for PACKET DRIVER in places such as driver disks for compatible network cards, relevant software distribution sites dealing with retro - computing network drivers, or documentation that comes with old network hardware which might contain the PACKET DRIVER.

Since you have successfully loaded the NDIS2 driver used by MSCLIENT, you can directly use DISPKT to convert it into a Packet driver for use.